AutoCAD basics and advanced modelling and drafting

AutoCAD basics and advanced modelling and drafting

1. DAY-7 AUTOCAD BY:-SANJEEB PRASAD DASH

2. TEXT Types of Text: Single line/Direct Text Multiline Text Arc align Text

3. Single line/Direct Text This command is use to write text in a single line. In this text we can’t set text properties. KC: DT Procedure : DT Start point of text Define the text height Define the rotation angle Write the text To deactivate press

4. Multiline Text This command is use to write text over multiple lines. In this text we set text properties. KC: MT Procedure: MT Specify 1st corner point for text Specify 2nd corner point for text Write the text To modify properties, select all text and change the properties from ribbon toolbar area. Click over outside.

5. Arc align Text This command is use to write text over any arc. It is also use to modify the arc align text. KC: ATEXT Procedure: ATEXT Select any arc or arc align text Write the text & set the require text properties Press OK.

6. HATCH This command is use to create shading inside a closed boundary. KC: H Procedure: Press H T for setting Select the require pattern and colour If require define angle and scale If require activate associative Click over more option and select style If require define gap tolerance Press Ok Specify a point inside a closed boundary. STEEL IRON,BRICK,MS BRONZE,BRASS,COPPER PLASTIC,RUBBER FIRE BRICK, REFACTORY METL MARBLE,GLASS ZINC,LEAD, MAGNESIUM ALUMINIUM

7. TYPES OF HATCH IGNORE NORMAL NO ISLAND OUTER