Bioremediation.pptx

Bioremediation

1. Bioremediation

2. It comes from two words, such as “bio” means living, and “remediate” means solving a problem. So, by combining these two words, we can say, “Bioremediation is the technique of solving a problem using living organisms like microbes .” In other words, it is a part of biotechnology that deals with the elimination of environmental contaminants by using microbes—the main biological agents. Thus , the microorganisms used for the degradation of such pollutants are called  bioremediates .

3. Nowadays, the food we are eating, the water we are drinking and using in several other works, the air we are breathing, or the land we’re living on, everywhere pollutants are present. According to a study of the environmental protection agency (EPA), only a minimal amount that is 10% of wastes are disposed of correctly. From this, we can easily conclude how much pollution exists in our ecosystem.

4. There are commonly five different kinds of contaminants, such as munitions wastes, organic solvents, halogenated aromatic hydrocarbon, pesticides, and Polyaromatic hydrocarbon (PAH). Thus , for removing such pollutants, the bioremediation technique is the most sustainable method. It does its work without affecting our environment and in an economically friendly way.

5. History of Bioremediation Bioremediation’s first commercial application was made in 1972 for the Sun oil pipeline spill in Ambler, Pennsylvania . However, In the mid-1980s, the researchers emphasize the bioengineering of the microbes used in the bioremediation process, which didn’t reach the goal it had . After that, in the mid-1990s, scientists changed their minds and switched to better reliance on natural microorganisms and techniques to boost their functionality.

6. Bioremediation Factors So , various factors necessary for the process of bioremediation are as follows; Microbial Population for the biological degradation. Availability of contaminants to degrade. Environmental Factors such as temperature, pH, nutrients, the presence of oxygen, and other electron acceptors, and also the kinds of soils.

7. Mechanism of Bioremediation

8. The mechanism or the working procedure of bioremediation is based on the activity of microorganisms we use. Those living organisms degrade and take the organic compounds such as carbon, electrons, source of cell-building materials, and energy source for their growth and reproduction . First, the contaminants are analyzed, and microorganisms are chosen according to the constituents present in that so that they can digest the pollutants easily . For this, the microbes are firstly examined, cultured, and placed in the polluted environment .

9. Moreover, the microbes then grow enormously and consume all the organic nutrients they found in the waste and convert them into carbon dioxide and water. We can take measures to improve the conditions.

10. Types of Bioremediation After knowing “what is Bioremediation,” now let’s know the various types of bioremediation. Bioremediation can be classified according to the strategies applied, the microorganisms used, and the degradation process types.

11. Based on strategies applied So , according to the strategy employed, the types of bioremediation is of two types such as; In situ bioremediation Ex-situ bioremediation

12. In situ bioremediation In situ, bioremediation is a strategy where, without excavation, we can treat the associated groundwater together with soil in place . The in-situ remediation process extent from a partially closed system to a completely open system.  Examples  of these techniques involve percolation, bioventing, air sparging , pump and treat, and bio-slurping. Percolation comprises of put on water, having nutrients and perhaps a microbial inoculum , to the exterior of a polluted part . It permits to filter into the soil and blend with the groundwater.

13. However, Bioventing is a technique of aeration of an unsaturated area by installing a well for drawing a vacuum on the soil with the associated blowers and pumps . Furthermore, Air sparging is just the opposite of bioventing, otherwise called biosparging . It is the aeration of a saturated area with contaminated soil by a flow rate of <5 m 3 /h per point . Also, the pump and treat are an in-situ technique where we can remove and treat contaminated groundwater . Bioslurping is another strategy for purifying groundwater and soil (having pollutants like petroleum hydrocarbons) by combining bioventing of surface soil with vacuum-enhanced free products.

14. Ex-situ bioremediation Furthermore , the ex-situ Bioremediation is just opposite to the in-situ technique.  Here the contaminated soil and groundwater are taken out from their original location for treatment. Some examples of ex-situ bioremediation are Land farming, compost piles irrigation, and engineered biopiles .

15. In the land farming process, we use the blend of volatilization and biodegradation with indigenous microbes to treat the soil contaminants by degrading or transforming them . For enhancing water and air holding capacity, and physical handling properties, we supplement the soil with composting elements like manure, wood chips, straw, etc. This is the process of compost piles.

16. In other ways, an ex-situ remediation technique where the contaminated soils are situated into piles or cells above the ground and the microbial activities are stimulated with aeration or addition of nutrients . Hence, we can employ both the in-situ and ex-situ to unsaturated or saturated regions, but there are some limitations for each technique.

17. Based on Microorganisms According to the microorganisms used, bioremediation is classified into three types: Bacterioremediation Phytoremediation Mycoremediation

18. Bacterioremediation Bacterioremediation is a type of remediation, where bacteria are bioremediants and can treat various kinds of pollutants through in-situ or ex-situ techniques.

19. Phytoremediation Phytoremediation utilizes several plants to stabilize, remediate, reduce, or restore contaminants in sediments, soil, water, etc. As these plants can store the heavy polluting metals in their tissues, industries apply various techniques such as phytoextraction or phytoaccumulation , phytotransformation , or phytodegradation , phytostabilization , phytovolatilization , rhizofiltration , and rhizodegradation .

20. Mycoremediation For decontaminating a zone, if we use various fungi types, then the form of bioremediation is called mycoremediation . Furthermore , a fungus is much known for its degradation properties by their fungal mycelia and hence developed this technique.

21. Based on Types of Degradation So, based on the principle of degradation, bioremediation is of two types; Biotransformation Biomineralization

22. Biotransformation In the biotransformation process, various organic components are partially degraded, and the remaining portion is transformed into various other organic matters . Biomineralization Biomineralization is another type of bioremediation where microorganisms digest and convert organic waste nutrients into inorganic materials like water, carbon dioxide, etc.

23. Advantages and Disadvantages of Bioremediation Various  advantages  of it involve: It is beneficial to degrade the pollutants from a wide variety of contaminants and convert them into non-hazardous forms from the hazardous form. This technology can treat the contaminants in their original location and thus the necessity to transfer from one medium to another finished. Affordable and thus economy friendly. Environment friendly as well, because the output we get is not harmful to the environment.

24. Various disadvantages  of it: Limited to biodegradable compounds. Proper microbial population and proliferation required. This is because biological mechanisms are highly precise. It takes lots of time to accomplish the process.