Comparison-of-Properties-of-Ionic-and-Covalent-Compounds.ppt

jojoj

1. Chemical Bonding
Comparison of Properties
Ionic Compounds
Covalent Compounds
Metals

2. Essential Questions
•Why/How do atoms combine with one
another to form the vast array of chemical
substances that exist?
•What is ionic, covalent and metallic bonding
and how do the types of bonding determine
properties of matter?

3. Properties of Matter
•Macroscopic properties of matter vary greatly
due to the type of bonding

4. What is a chemical bond?
•An attractive force that
holds two atoms
together
•Can form by
–The attraction of positive
ion to a negative ion or
–The attraction of the
positive nucleus of one
atom and the negative
electrons of another
atom

5. Bond
•the interaction between two or more atoms
that allows them to form a substance different
from the independent atoms.
•involves the outer (valence) electrons of the
atoms.
•These electrons are
–transferred from one atom to another or shared
between them.

6. Chemical Bond Energy Considerations
•A chemical bondforms when it is energetically
favorable
–when the energy of the bonded atoms is less than
the energies of the separated atoms.
–Al + I
2
https://www.youtube.com/watch?v=XBPqSuIN-3E

7. Bonding
•Chemical compounds are formed by the
joining of two or more atoms.
•A stable compound occurs when the total
energy of the combination has lower energy
than the separated atoms.
•The bound state implies a net attractive force
between the atoms ... a chemical bond.

8. Energy Changes in Bonding
•When bonds are formed, energy is released.
•Demonstrations:
–Formation of an IonicCompound: Mg + O
2
–Formation of a Molecular Compound: S +O
2

9. Breaking Bonds
•In order to break bonds energy must be
added, usually in the form of heat, light, or
electricity.
•Demonstration: Electrolysis of water
•Demo: Decomposition of Nitrogen Triiodide
•http://www.youtube.com/watch?v=z5vsQ8sPgX4

10. Three Types of Bonding
Metallic
Covalent
Ionic

11. Chemical Bonds
In chemical bonds, atoms
•can either transferor
•sharetheir valence
electrons.

12. When atoms transfer electrons
Ionic Bonds
When one or more atoms lose electrons and
other atoms gain them in order to produce a
noble gas electron configuration, the bond is
called an ionic bond.

13. Ionic Bonding
•metallic atoms tend to lose electrons
•When they do so, they become positively charged
ions which are calledcations.
•Nonmetallic atoms tend to gain electrons to become
negatively charged ions which are calledanions.
•These oppositely charged cations and anions are
attracted to one another because of their opposite
charges.
•That attraction is called anionic bond. We often
refer to the charge on the ion as theoxidation
stateof that element.

14. Negative Ion (Anion) Formation
•Na has one valence electron.
•It loses it to Chlorine.
•Na now has a filled valence shell.
(an octet)
•Becomes positive one in charge
•Chlorine has seven valence
electrons.
•It gains one electron from Na.
•Chlorine now has filled octet.
•Chlorine has a negative one
charge. (Chloride ion)
•Na
+1
attracts Cl
-1
and forms the
ionic bond.
Positive Ion (Cation) Formation

16. Ionic Bonds
•Part 1
–http://www.youtube.com/watch?v=Qf07-8Jhhpc
•Part 2
–http://www.youtube.com/watch?v=5EwmedLuRmw
•Part 3
–http://www.youtube.com/watch?v=RkZNYuSho0M

17. Ion Formation
•All of the elements in Group I have one
electron in their outermost energy level.
•All of these elements can lose that one
valence electron.
•These atoms become cations with a positive
one charge.

18. •Elements in Group II have two electrons in
their outermost energy level.
•So, when these elements lose electrons, they
lose two electrons and take on a positive two
charge.

19. •The transition metals and the metals to the right of
them generally form more than one ion.
•We call these elements multivalent. The charges on
their ions are not always predictable, although some
patterns do exist.
•A few of the transition elements form only one ion or
oxidation state. For example zinc ion, silver ion and
scandium ion.
•Zn
2+
zinc ion
•Ag
+
silver ion
•Sc
3+
scandium ion

20. Anions
•Nonmetals tend to gain electrons.
•The halogens -fluorine, chlorine, bromine, and iodine -have a strong
attraction for electrons.
•Their outermost energy levels are almost full. There is only room for one
more electron in the outer energy levels for each of those atoms.
Consequently, the elements fluorine, chlorine, bromine, and iodine will
gain one electron, and become anions with a negative one charge.
•Oxygen, sulfur, and the other elements in that family will gain two
electrons.
•In the next group over, nitrogen, phosphorus and arsenic can take on three
electrons.

21. +2
+1
+3-3-2-1

22. Ionic Nomenclature
•Naming Ionic Compounds
•Video of the Process
–http://www.youtube.com/watch?v=URc75hoKGLY

23. Ionic Compounds
•Made of cations and anions
•Metals and nonmetals
•The electrons lost by the cation are gained by
the anion
•The cation and anions surround each other
•Smallest ratio of ions in an ionic compound is
a FORMULA UNIT.

24. K
+1
Ca
+2Has lost two electrons
Cations
•Positive ions
•Formed by losing electrons
•More protons than electrons
•usually Metals
Has lost one electron

25. Anion
•A negative ion
•Has gainedelectrons
•Non metals
•Charge is written as a super script on the
right.
F
-1Has gained one electron
O
-2
Has gained two electrons

26. Formula Unit
•The smallest whole number ratio of atoms in
an ionic compound.
•Ions surround each other so you can’t say
which is hooked to which

27. Naming Ions
•We will use the systematic way
•Cation-if the charge is always the same just
write the name of the metal
•Transition metals can have more than one
type of charge
•Indicate the charge with a Roman numeral in
parentheses

28. Name these
Na
+1
Ca
+2
Al
+3
Fe
+3
Fe
+2
Pb
+2
Li
+1

29. Write Formulas for these
•Potassium ion
•Magnesium ion
•Copper (II) ion
•Chromium (VI) ion
•Barium ion
•Mercury (II) ion

30. Naming Anions
•Change the element ending to –ide
•F
-1
Fluorine

31. Name these
Cl
-1
N
-3
Br
-1
O
-2
Ga
+3

32. Write these
•Sulfide ion
•iodide ion
•phosphide ion
•Strontium ion

33. Polyatomic ions
•Groups of atoms that stay together and
have a charge
•You must memorize these or use an ion
sheet… common examples
–Acetate C
2
H
3
O
2
-1
–Nitrate NO
3
-1
–Nitrite NO
2
-1
–Hydroxide OH
-1
–Permanganate MnO
4
-1
–Cyanide CN
-1

34. More Polyatomic ions
•Sulfate SO
4
-2
•Sulfite SO
3
-2
•Carbonate CO
3
-2
•Chromate CrO
4
-2
•Dichromate Cr
2
O
7
-2
•Phosphate PO
4
-3
•Phosphite PO
3
-3
•Ammonium NH
4
+1

35. Practice with Ions
•Use the practice worksheet to determine the
ions formed.
•Learn to use your periodic table and pink
sheet to determine charges (oxidation state.)

36. Binary Ionic Compounds
•Binary Compounds
–2 elements.
–a cation and an anion.
•To write the names just name the two ions.
–Easy with Representative elements
•Groups 1, 2, 13
•NaCl = Na
+
Cl
-
= sodium chloride
•MgBr
2
= Mg
+2
Br
-
= magnesium bromide

37. Naming Binary Ionic Compounds
with Variably Charged Cations
The problem comes with the transition
metals (Groups 3-12) since their charge can
vary
Need to figure out their charges
The compound must be neutral
same number of + and –charges.
Use the anion to determine the charge on the
positive ion
Charge of the cationis a Roman numeral in
the name

38. Example
•Write the name of CuO
•Need the charge of Cu
•O is -2
•copper must be +2
•Copper (II) chloride

39. Example
•Name CoCl
3
•Cl is -1 and there are three of them = -3
•Co must be +3 Cobalt (III) chloride

40. Another Example
•Write the name of Cu
2
S.
•Since S is -2, the Cu
2
must be +2, so each one
is +1.
•copper (I) sulfide

41. Last Example
•Fe
2
O
3
•Each O is -2 3 x -2 = -6
•3 Fe must = +6, so each is +2.
•iron (III) oxide

42. Naming Binary Ionic Compounds
Write the names of the following
KCl
Na
3
N
CrN
Sc
3
P
2
PbO
PbO
2
Na
2
Se

43. Ternary Ionic Compounds
Will have polyatomic ions
At least three elements
Name the ions
NaNO
3
CaSO
4
CuSO
3
(NH
4
)
2
O

44. Ternary Ionic Compounds
•LiCN
•Fe(OH)
3
•(NH
4
)
2
CO
3
•NiPO
4

45. Writing Formulas
Given the name write the formula
1.The charges have to add up to zero
2.Write down each ion with charges
3.Make the charges equal by adding subscripts
4.Put polyatomic ions in parentheses if you
need more than one of them

46. Writing Formulas Example
•Write the formula for calcium chloride.

47. Another Example
•Aluminum nitrate

48. Write the formulas for these
Lithium sulfide
tin (II) oxide
tin (IV) oxide
Magnesium fluoride
Copper (II) sulfate
Iron (III) phosphide

49. Write the formulas for these
•gallium nitrate
•Iron (III) sulfide
•Ammonium chloride
•ammonium sulfide
•barium nitrate

50. Things to look for
•If cation has (Roman Numeral), the number is
the charge
•If anions end in -idethey are probably off the
periodic table (Monoatomic)
•If anion ends in -ateor -iteit is polyatomic

51. Ionic Solids
•Ionic solids are solids composed of ionic
particles (ions).
•These ions are held together in a regular
array by ionic bonding.
•Ionic bonding results from attractive
interactions from oppositely charged ions.
•In a typical ionic solid, positively charged
ions are surrounded by negatively charged
ions and vice-versa.
•The close distance between these
oppositely charged particles results in very
strong attractive forces.
•The alternating pattern of positive and
negative ions continues in three
dimensions.
•The regular repeating pattern is analogous
to the tiles on a floor or bricks on a wall.
•called the crystal lattice.

52. Ionic Compounds
•Crystalline solids
(made of ions)
•High melting and
boiling points
•Conduct electricity
when melted or
dissolved in water
–Demo: Electrolytes
•Many are soluble in
water but not in non-
polar liquid

53. Comparison of Conductivity

54. Common Ionic Compounds
–NaCl-sodium chloride -table
salt
–KCl-potassium chloride -
present in "light" salt (mixed
with NaCl)
–CaCl
2-calcium chloride -
driveway salt
–NaOH-sodium hydroxide -
found in some surface
cleaners as well as oven and
drain cleaners
–CaCO
3-calcium carbonate -
found in calcium supplements
–NH
4NO
3-ammonium nitrate -
found in some fertilizers

55. Ionic vs Molecular
•http://www.youtube.com/watch?v=PKA4CZw
bZWU

56. Covalent (Molecular) Compounds
•Gases, liquids, or
solids (made of
molecules)
•Low melting and
boiling points
•Poor electrical
conductors in all
phases
•Many soluble in non-
polar liquids but not in
water

57. Molecular (Covalent) Substances

58. Covalent Network Solids
•Covalent because
combinations of
nonmetals
•Interconnected
•very hard and brittle
•Insoluble
•Extreme melting and
boiling points
Diamond

59. Covalent Bonds
•involve the sharingof a pair of valence
electrons by two atoms
•Such bonds lead to stable molecules if
they share electrons in such a way as to
create a noble gas configuration for each
atom

60. Covalent bonding can be visualized with the aid
of a Lewis Structure

61. Polar Covalent Bonds
•Covalent Bonds in which the sharing of the
electron pair is unequal
•the electrons spend more time around the
more nonmetallic atom
•In such a bond there is a charge separation
with one atom being slightly more positive
and the other more negative……. will produce
a dipole moment.

62. Types of Covalent bonds
•Pure Covalent (also called
non-polar covalent) bonds are
ones in which both atoms
share the electrons evenly
•By evenly, we mean that the
electrons have an equal
probability of being at a
certain radius from the nuclei
of either atom.
•Polar covalent bonds are ones
in which the electrons have a
higher probability of being in
the proximity of one of the
atoms
•Determined by
ElectronegativityDifference

63. Electronegativity
•the periodic property that indicates
the strength of the attraction an
atom has for the electrons it shares in
a bond.
•Atoms with high electronegativities
tend to hold tightly to their electrons
or to form negative ions.
–These elements are found to the
upper right on the periodic table.
•Atoms with low electronegativities
tend to have a lower attractionfor
their electrons and may form positive
ions.
–These elements are found to the
lower left on the periodic table.

64. Pure covalent or Non-polar
covalent bond
•Electronegativity difference of 0.3 or less in
between the two atoms.
•A pure covalent bond can form between two
atoms of the same element (such as in
diatomic oxygen molecule)
•or atoms of different elements that have
similar electronegativies (such as in the
carbon and hydrogen atom in methane).

65. Polar Covalent Bond
•A is a pair of electrons shared between two atoms
with significantly different electronegativities (from
0.3 to 1.7 difference).
•These bonds tend to form between highly
electronegative non-metals and other non-metals,
such as the bond between hydrogen and oxygen in
water.

66. Ionic Bonds
•In compounds that have elements with very
different electronegativities (greater than 1.7
difference), the electrons can be considered to
have been transferred to form ions.

67. •Many of the properties of a compound, such
as solubility and boiling point, depend, in part,
on the degree of the polarity of its bonds.

68. Examples to Determine Bond Character
•Using electronegativity in the prediction of the
polarityof a chemical bond.
•sodium bonded to chlorine
–Difference between the electronegativities of Na(0.9) and
Cl(3.0) are so great that they form an ionic bond.
•The hydrogen molecule (2 H atoms bonded to each
other)
•zero electronegativity difference, form a non-polar
covalent bond.

69. Bond Character
•Nonpolar-Covalent bonds (H
2)
–Electrons are equally shared
–Electronegativitydifference of 0 to 0.3
•Polar-Covalent bonds (HCl)
–Electrons are unequally shared
–Electronegativitydifference between .3 and 1.7
•Ionic Bonds (NaCl)
–Electrons are transferred
–Electronegativitydifference of more than 1.7

70. Diatomic Molecules
•hydrogen gas H
2
•the halogens:
–chlorine Cl
2
–fluorine F
2
–bromine Br
2
–iodine I
2
•Nitrogen N
2
•Oxygen O
2
Pneumonic Device to remember the diatomic
molecules: Professor BrINClHOF

71. Metals and Metallic Bonding
•Typical Properties of Metals
–Malleable
–Ductile
–Good Conductors of Heat and Electricity
–Generally high melting and boiling points

72. Metallic Bonds
•The properties of metals suggest that their
atoms possess strong bonds
•yet the ease of conduction of heat and
electricity suggest that electrons can move
freely in all directions in a metal
•The general observations give rise to a picture
of "positive ions in a sea of electrons" to
describe metallic bonding.

73. Metal Properties
•Malleable and Ductile
•Strong and Durable
•Good conductors of heat and electricity.
•Their strength indicates that the atoms are difficult to
separate… strong bonds
•but malleability and ductility suggest that the atoms are
relatively easy to move in various directions.
•The electrical conductivity suggests that it is easy to move
electrons in any direction in these materials.
•The thermal conductivity also involves the motion of
electrons. All of these properties suggest the nature of the
metallic bonds between atoms. (Electron sea model)

74. Metallic Bonding
Electron Sea Model
•Explained by the Electron Sea
Model
•the atoms in a metallic solid
contribute their valence electrons
to form a “sea” of electrons that
surrounds metallic cations.
•delocalized electrons are not held
by any specific atom and can
move easily throughout the solid.
•A metallic bond is the attraction
between these electrons and the
metallic cation.
•

75. Metallic Bonding
the Electron Sea Model
•The more delocalized
electrons the stronger
the bond

76. •A mixture of elements that has metallic
properties is called an alloy.
•Two types of alloys
–An interstitial alloy is one in which the small holes
in a metallic crystal are filled by other smaller
atoms.
–A substitutional alloy is one in which atoms of the
original metal are replaced by other atoms of
similar size.

77. Ionic Compounds Covalent Compounds Metallic Compounds
-Formed from a combination of metals and
nonmetals.
-Electron transfer from the cation to the anion.
-Opposite charged ions attract each other.
-Formed from a combination of
nonmetals.
-Electron sharing between
atoms.
-Formed from a combination of
metals
-“sea of electrons”;
electrons can move among
atoms
Solids at room temperature Can be solid, liquid, or gas at
room temperature.
Solids at room temperature
High melting points Low melting points Various melting points
Dissolve well in water Do not dissolve in water (Sugar
is an exception)
Do not dissolve in water.
Conduct electricity only when dissolved in
water; electrolytes
Do not conduct electricity; non
electrolytes
Conduct electricity in solid form.
Brittle, hard Soft Metallic compounds range in
hardness. Group 1 and 2 metals
are soft; transition metals are
hard. Metals are malleable,
ductile, and have luster.