Construction of Sewage Treatment Plant STP – 350 kld for CPMF Part 1

http://netsolwater.com/sewage-treatment-plant-manufacturer.php -
Sewage treatment plant helps in removing contaminants from wastewater and household effluent, both runoff (effluents) and domestic. It includes physical, chemical, and biological processes to remove physical, chemical and biological contaminants. Its objective is to produce an environmentally safe fluid waste stream (or treated effluent) and a solid waste (or treated sludge) suitable for disposal or reuse (usually as farm fertilizer).

Commercial Sewage Treatment Plant
Sewage is generated by residential, institutional, and commercial and industrial establishments. It includes household waste liquid from toilets, baths, showers, kitchens, sinks and so forth that is disposed of via sewers. In many areas, sewage also includes liquid waste from industry and commerce. The separation and draining of household waste into greywater and blackwater is becoming more common in the developed world, with greywater being permitted to be used for watering plants or recycled for flushing toilets. After analyzing and understanding the requirements of institutional, commercial and industrial establishments we provide commercial sewage treatment plant and industrial sewage treatment system which help meet specific client requirement.

Sewage is the subset of wastewater that is contaminated with feces or urine, but is often used to mean any wastewater. Sewage includes domestic, municipal, or industrial liquid waste products disposed of, usually via a pipe or sewer (sanitary or combined), sometimes in a cesspool emptier. Wastewater Treatment plants are used to make water reusable by eradicating dissolved impurities present in it.

1. Construction of STP – 350 KLD for CAPFs Hospital, Greater Noida

2. Capacity – 350 M 3 Technology – SBR Area Required- 250 Sq. Mtr.

3. Process Flow Diagram To Solid handling, disposal Treated Water or Beneficial reuse Inlet Sewage Line Screening / grinding MGF ACF Filter Press Sludge Holding tank Equalization Tank SBR Tank Oil & Grease Chlorine contact Tank

4.   Design Parameter RAW SEWAGE CHARACTERISTICS S.NO. PARAMETER UNIT RAW WASTE WATER COMMENT 1 DESIGN FLOW m3/day 350 As per Client 2 AVERAGE FLOW m3/hr 17.5 As per Client 3 PEAK HOURS m3/ hr 3 Standard Parameter 4 DESIGN TEMPERATURE ᵒc 16-40 Standard Parameter 5 BOD5 mg/l 250-350 Standard Parameter 6 COD mg/l 400-500 Standard Parameter 7 TSS mg/l 100-250 Standard Parameter 8 OIL & GEASE mg/l 30-50 Standard Parameter 9 pH   6.5-8.0 Standard Parameter

5. TREATED WATER QUALITY AA PARAMETER UNIT TREATED WATER COMMENT 1 DESIGN FLOW m3/day 350 As per Client 2 AVERAGE FLOW m3/ hr 17.5 As per Client 3 BOD5 mg/l < 10 As per Standard Parameter 4 COD mg/l < 50 As per Standard Parameter 5 TSS mg/l < 10 As per Standard Parameter 6 OIL & GEASE mg/l < 10 As per Standard Parameter 7 pH   6.5-8.0 As per Standard Parameter

6. Drawing For 350 KLD STP

7. Section Layout

8. Plant Room

9. Process Flow Diagram