electr_hazrec analysis presentation documents

electr_hazrec analysis presentation documents

1. 1
Recognize Any Hazard(s)?

2. 2
Yes
No employer shall permit a
worker to workin such
proximity to any part of an
electric power circuitthat
the worker could contactthe
electric power circuit in the
course of work

3. 3
Recognize Any Hazard(s)?

4. 4
Yes
Crossing electrical line
must be supported,
protected or removed to
safeguard workers

5. 5
Recognize Any Hazard(s)?

6. 6
Yes
Spliced electrical
extension cords.
Extension cords
should be
marked DO NOT
USE. Also, bad
housekeeping,
trip hazard and
unprotected hole
in photograph

7. 7
Recognize Any Hazard(s)?

8. 8
YES
1. No GFCI
2. System not
grounded
3. Openings where
conductors entered
not closed
4. No cover on
boxes
5. Panel boards
were not dead front

9. 9
Recognize Any Hazard(s)?

10. 10
YES
Electric drill
flexible cord
was spliced to
a non-flexible
conductor with
damaged
insulation

11. 11
Recognize Any Hazard(s)?

12. 12
Yes
Scaffold was erected 4 ½
feet from 7.2 kV power
lines

13. 13
Recognize Any Hazard(s)?

14. 14
YES
Continuous
path to
ground not
maintained;
multiple
cords used
for fixed
equipment

15. 15
Recognize Any Hazard(s)?

16. 16
YES
Employer was
operating a
stand fan
without
grounding
protection

17. 17
Recognize Any Hazard(s)?

18. 18
Yes
Conductors entering boxes,
cabinets, or fittings shall be
protected from abrasion.
Openings through which
conductors enter shall be
effectively closed

19. 19
Recognize Any Hazard(s)?

20. 20
Yes
Flexible cords and
cables may pass
through doorways
or other pinch
points, if
protection is
provided to avoid
damage