Engineering Drawing - Chapter 1.pdf

Basic introduction to engineering drawing.

1. Engineering Drawing - MEng 2031
Chapter 1:
Introduction of Basic Engineering Drawing
,
March 6, 2023

2. Outline
1
Graphical language
2
Technical Drawing
3
Lettering
4
Alphabets of line
5
Geometric construction

3. Grapical language in Engineering applications
Giving direction by using a rough sketch
Use lines to represent thesurface,edgeand
contoursof an object.
Drawings, photographs, slides, transparencies,
and sketches are all forms of graphic
communication.
The language is known asdrawingordrafting
A drawing can be done usingfreehand,
instrumentsorcomputer.
Exercise
Draw the direction from you classroom (current) to
your dormitory using freehand sketch.

4. Figure:

5. Denitions
Drawing
a tool used by engineers and industrial designers
to design a product, solve a problem, or produce
a product
a graphic representation of an idea, a concept or
an entity which actually or potentially exists in
life
Engineering
It stems from the Latin \ingenerare", meaning o
create".

6. continued...
Two divisions of drawings
technical drawingcommunicate the same message,
whereas anartistic drawinginterpreted dierently
by everyone who sees it.
Technical Drawing
the art and science of describing structures and
structural details completely and accurately by
graphical means
controlled by accepted standards, drawing
"conventions" and projection techniques.

7. Role of Engineering Drawing
The ability to read drawing is the most important
requirement of all technical people in any profession
Some of the applications are: building drawing for
civil engineers, machine drawing for mechanical
engineers,
electronics engineers,
all. In general, engineering drawing,
Ability to read and prepare engineering drawings.
Ability to make free - hand sketching of objects.
Power to imagine, analyze and communicate, and
Capacity to understand other subjects:

8. Elements of Engineering drawing

9. continued...

10. Standards
Are set of rules that govern how technical drawing is
represented
ANSI:American National Standard Institute
JIS:Japan Industrial Standard
BS:British Standard
AS:Australian Standard
ISO:International Standards Organization

11. Drawing Sheets
Trimmed paper of a
size A0-A4
Standard sheet size
IA4: 210297
IA3: 297420
IA2: 420594
IA1: 594841
IA0: 8411189

12. Lettering and Drawing Sheet
Lettering in Engineering drawing is used to:
To communicate non graphic information
As a substitute for graphic information
Thus it must be written with:
Legible:shape, space between letters and words
Uniformity:size and line thickness
Title Block

13. Lettering Standards
ANSI standard
Use Gothic text style,
either inclined or
vertical
Use all capital letters
Use 3 mm for most
text height
Space between lines of
text isat least
1
3
of
text height
On this course
Use only vertical
Gothic text style
Use only capital
letters
Single stroke only
N/A. Follows ANSI
standard rule

14. Line
A path between two points (straight or curved)
A moving point
Geometric gure that has only one dimension:
Length.
Types of lines
The meaning of each line on a technical drawing
is indicated by its thickor thin) and its
particular
To make your drawings easy to read, make the
contrast between thick and thin lines distinct.
Thick lines (0.6 mm) should be twice the width of
thin lines (0.3 mm)

16. Meaning of lines
Visible (Object) lines:thick lines represent
features that can be seen in the current view.
Hidden lines:represent features that can not be
seen in the current view. Drawn approximately 3
mmlong with a space of 1:0mmleft between
each dash.
Center line:represent symmetry, path of
motion, centers of circles. Long dash (2040
mm) and short dash (3mm)
Dimension and Extension lines:indicates the
sizes and location of features on a drawing
Section lines:indicates where the cutting plane
cuts the material

17. Cutting plane lines:used to indicate the
location of the cutting of cutting plane in the
process of sectioning.
Break lines:used to break out sections for
clarity or for shortening apart.
Phantom lines:thin lines composed of long
dashes alternating with pairs of short dashes.
Show alternating positions, repeated details.

18. Exercise: Identify the type of line represented by
each number

20. Geometric construction: Objectives
Identify dierent types of plane geometry and
their basic elements;
Construct dierent types of geometrical gures;
Apply methods and rules of construction for
dierent types of geometrical shapes.
4H to 6H leads produce very lightweight lines.
These lines need not necessarily be erased when
the construction is completed.
Purpose in geometric construction
To accurately develop plane geometric shapes ranging
from squares, triangles, and three dimensional
cylinders to complex irregular curves and ellipses.

21. 1. Triangles
A. Constructing any traingle given 3 sides (AB,
AC, BC)
1
Draw line AB.
2
With a center at A and radius
AC, draw an arc.
3
With center at B and radius
BC, draw another arc that cut
the previous arc at C.
4
Connect point C to A and B.

22. B. Constructing any triangle given 2 sides (AB
and AC) and included angle
1
Draw the base line AB
2
Draw line AD at an
angle offrom AB, using
any proper instrument
3
A as a center and AC as
a radius, strike an arc on
AD to get point C
4
Connect C to B. ABC is
the required triangle

23. 2. Constructing a regular pentagon in
a given circumscribing circle
Draw horizontal diameter AB and vertical
diameter CD intersecting at O.
Draw the circle with radius equal to half of AB.
Construct the midpoint of OB and mark as E.
With E as a center and radius equal to CE, strike
the arc CF to intersect AB at F.
With C as a center and CF as a radius, strike the
arc FG to intersect the circle at G
Set a compass to GC and lay o this interval
from C around the circle.
Connect the points of intersection

24. Exerciese
Draw a regular pentagon whose circumscribed circle is
60mm diameter

25. 3. Constructing a regular hexagon in a
given circumscribing circle
1
Draw diameters AB
and CD intersecting
at O.
2
OB as radius, draw
the circle.
3
Starting from C and
with radius OB, lay
o points around the
circle.
4
Connect the points.

26. 4. Constructing any regular polygon
with a given length of side
(approximate method)
1
Draw the given side AB.
2
With radius equal to AB and centers at A and B
draw arcs that intersect at point 6.
3
Draw a perpendicular to line AB through point 6
and extend it upward beyond point 6.
4
Draw 45°line from either A or B to intersect the
perpendicular line at point 4.

27. continued...
1
Bisect the distance 4-6 to locate point 5.
2
Step up (lay o) distance equal to 5-6 beyond
point 6 to get points 7, 8, 9....
3
With center at 8 and radius 8-A or 8-B, draw a
circle that will inscribe the polygon.
4
Adjust your compass to AB and divide the circle
into eight equal parts and connect the division
points to complete the construction of the regular
polygon (in this case octagon).

28. continued...

29. 5. Circles and Tangents
5.1 Drawing a circle through three noncollinear
points A, B and C
1
Mark any three points
and connect them.
2
Draw the perpendicular
bisectors of both AB and
BC to intersect at O.
3
With O as centers and
radius OA, draw the
required circle.

30. 5.2 Constructing a line tangent to a circle
through an external point
1
Draw a circle and locate given point P.
2
Construct the center O of the circle.
3
Connect OP
4
Locate point M by constructing the midpoint of
OP.
5
With M as a center and radius OM, draw an arc
to intersect the circle at point of tangency T1 and
T2.
6
Connect T1 to P and T2 to P

32. 5.3 Constructing tangent line to two circles of
dierent size: whereRis greater thanr
1
Draw two given circles with center points O and O'.
2
Connect the center point of the circles with line OO'.
3
Construct midpoint C of line OO'.
4
With C as a center and radius OC, draw a semicircle
through OO'.
5
With O' as a center and radii R-r and R+r, strike arcs that
intersect the semicircle on OO' at D and E respectively.
6
Draw O'D to intersect circle O' at F and similarly draw
O'E to intersect circle O' at G.
7
Through center O, draw OH parallel to O'F and OK
parallel to O'G.

34. 5.4 Constructing internal and enclosing tangent
arcs of radii R and R' respectively to two circles
of radii R1 and R2
1
Draw two given circles with radii R1 and R2 and
centers O and O' respectively.
2
With O as a center and radii R+R1 and R'-R1,
strike two arcs as shown in the gure.
3
With O' as a center and radii R+R2 and R'-R2,
strike two arcs intersecting the previous arcs at
points P and P'. P and P' are the centers of the
tangent arcs.
4
With P and P' as centers and corresponding radii
R and R' respectively, draw the tangents.

35. Exercise
Draw two circles whose radii are 30 mm and 20 mm
with centers 54 mm apart. Draw an arc of 70 mm
radius tangent to upper sides of circles and enclose
them.

36. 6. Construction of an ellipse
An ellipse is the locus of all co-planar points, the sum
of whose distances from two xed points (foci) is
constant.
The longer axis of an ellipse is called major axis
(diameter) and the shorter axis is called minor axis
(diameter).
An ellipse is constructed in several methods, few
of which are
1
Four-center method (an approximate method)
2
Concentric circles method
3
Parallelogram or conjugate diameter method.

37. Constructing ellipse by four-center method
1
Draw the major axis AB and the minor axis CD intersecting
at O. Connect the end points of the two axes AD.
2
With radius OA and center O, strike an arc to intersect the
extension of minor axis at E.
3
With radius DE and Center on D, mark o point F.
AF=AO { DO and OA=OD+DE.
4
Draw perpendicular bisector of AF and extend it to
intersect the major axis at K and the minor axis at H.
5
With a divider or compass mark o OM equal to OK, and
OL equal to OH.
6
With H as a center and radius equal to HD, draw the
bottom arc between TT. With L as a center and same
radius HD, draw the top arc between TT.
7
With M as a center and radius equal to MB, draw the right
side end arc between TT. repeat for left-side with center K.

38. Exercise
Draw an ellipse whose axis is 102mm long
(horizontally and whose minor axis is 64mm long,
using four-center method.