eye drops.pptx

A brief presentation on eye drop . About its manufacturing , labeling , containing and some more important points.

1. A Presentation On ‘Eye Drops’ BY – Sanjay Singh Roll no. – 71 sec A

2. What is eye drop ? Eye Drops are liquid drops applied directly to the surface of the eye usually in small amounts such as a single drop or a few drop. Eye drops have less of a risk of side effects. Eyes drops usually contain saline to match the salinity of eye. These are the formulation which are sterile in nature. They use for instillation into the eye b/w the eyelid and eye ball. Eye drops may also contain one or more medications to treat a wide variety of eye diseases.

3. Ideal characteristics of eye drops :- It should be sterile. Their should be no leakage in the container containing eye drop solution. It must be easy to install by the patient. Particle Limitation pH , Stability and Eye comfort These eye drops are packed for single use , without preservatives

4. Classification of ODDS( ocular drug delivery system) Liquids Semisolids Solid Intraocular Dosage Form Solutions Ointments Ocular inserts Injection Suspension Gels Contact lenses Irrigating Solution Powders for reconstitution Implants Sol to Gel system

5. Requirements for ophthalmic preparation:- Ophthalmic preparation should possess the following properties- Foreign Particles Tonicity pH of preparations Sterility Surface activity

6. Foreign Particles:- All the ophthalmic preparation should be clear and free from foreign particles , fibres and filaments. Ophthalmic solution should be clarifies very carefully by passing through membrane filter and sintered glass filter. The particle size of the eye suspension should be in an ultrafine state to minimize irritation. A separate filter should be used for different ophthalmic products in order to avoid the contamination.

7. Viscosity :- TO provide prolong action. Increase the contact time of the drug in the eye. Eg - Polyvinyl alcohol , Polyethylene glycol , methyl cellulose , carboxy methyl cellulose are some thickening agents use Thickening have some properties:- Easy to filter Easy to sterilize Compatible with other ingredients

8. Tonicity:- Ophthalmic product should be isotonic with lacrimal secretion to avoid discomfort and irritation in eyes. Range of tonicity that eye tolerate is from 0.5-2% Nacl . Isotonic vehicle- 1.9% boric acid , sodium acid phosphate buffer.

9. pH of the preparation:- pH plays an important role in therapeutic activity , solubility , stability and comfort to the patient. TEAR have a pH of about 7.4 Eye can tolerate solution which have pH as pH of eye. Alkaloid salt solution are stable at pH 2-3 but this pH cause irritation in eye. Alkaloids get ppt. at pH 7 or above and cause a number of formulation problems.

10. Formulation of Eye Drops Drug Preservative Sterilization Isotonicity Buffer Viscosity Container Label

11. Drug These contains drug of various categories including antiseptic , antiinflamatory agent etc. Preservative Eye drops should be sterile and should contain preservatives to avoid microbial contamination when the container is open . Eg - Benzalkonium chloride , Phenylmercuric nitrate ,Phenylmercuric acetate. Sterilization Eye drops are sterilized by autoclaving at 121^c for 15 minute By bacteria filter to avoid thermal degradation like- preservative chlorobutanol hydrochloride at high temperature.

12. Isotonicity All the solutes including Drug should maintain the osmatic pressure of the Eye drops , therefore the isotonicity of the formulation is calculated. NaCl 0.9% and boric acid 1.9% are iso-osmotic. Buffer To maintain the pH of the formulation , solubility , stability and eye comfort. Alkaloids show ppt. at pH 7 so the most common buffer for eye comfort is sodium phosphate. Viscosity The size of Drop and its residences in eye depends on the viscosity of eye drop. Eg - Methylcellulose , hydroxypropyl methylcellulose and polyvinyl alcohol are common viscosity enhances.

13. Labeling Name and concentration of drug Direction of use Company name Date after note to use For external use only

14. Container The commonly used container for ophthalmic solution or suspension is multiple dose container (5 ml, 10 ml) Glass container is supplied with sterile plastic dropper, plastic bottles are with built with nozzle.