Figures of paper1 used in fliar for submission in the first work

About figures

1. MFFCED Diagram (To be modified) May we increase its resolution? The diagram is blurry! Please change their locations The variables like , , should be italic and written in math mode.   Please add connection Remove the word ‘layer’ from the last blocks 1 and 2 as subscripts like   Font size should be increased

2. Overview of the process Containerized Software Architecture 7 quality characteristics: Weight (gram) Surface planarity (mm) Straightness (mm) Two lengths (mm) Two widths (mm) Injection velocity Cooling time Packing pressure Packing time Mould temperature Melt temperature Cycle time Injection time Dosing time Melt cushion Switchover pressure Injection pressure Clamping force Mold open/close Screw volume Pressure integral Dosing torque Process parameters Two in-mould pressure sensors Two in-mould temperature sensors Time series PPs Machine setting parameters MOLD Injection moulding machine in out Quality control

3.   Machine Setting Parameters and Process P arameters

6. Updated 20230118

7. To be modified, similar style as the MFFCED Diagram

8. Updated 20230118

9. Validation Result  Muaz suggests not to include this figure!

10. Data Will be done in Latex!

11. System architecture