Fuel Management System Topology Proporal

Solusi FMS

1. FMS Solution Proposal December 2020

2. IOT : Overall FMS Solution Topology T.101 1000 KL T.102 500 KL T.201 2000 KL KFT-001 LC M10 KFT-002 LC M10 GFTH 808 LC M10 GFTH 809 LC M10 T.03 16 KL T.01 20 KL VHS TTM VHS Pertamina FM LC M 15 FM LC M 15 Fuel Station Jetty Fuel Station North Pit H.E D.T L.V Units T.201 300 KL T.02 20 KL H.E D.T L.V Units FMR60 RADAR Level FM LC M 15 Coriolis Flow Meter Coriolis Flow Meter MCU MCU

3. IOT : INTANK for HE/LE | Solution Topology Customer Access IoT Platform Online Dashboard Cellular Network GSM (2G/3G) Internet MCU MCU (Master Control Unit) Data communication Edge computing and data logger Connectivity : Built-in GPS, GSM (2G/3G/), Wifi , DFM Flow Meter Source power DC from battery unit Data communication : Connected to MCU (via CAN/S6 interface) Flow rate : up to 300 l/h Calculate fuel rate (fuel consumption), Engine running hours Satellite GPS WLAN Access Point Administrator Access Device P2P WLAN/ WiFi

4. Specification | HE/LV – INTANK MCU Dual Mode Connectivity Specification Value 3G (UMTS/HSPA) and 2G (GSM/GPRS/EDGE) engine - 3G bands: 900/2100 & 850/1900 MHz - 2G bands: 850/900/1800/1900 MHz WiFi /wireless LAN 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless Multi channel GNSS ( GPS+Galileo /GLONASS ) receiver A-GPS (online / offline / autonomous) Protocols NMEA Accuracy GPS : 2.5 m | GLONASS : 4.0 m Operating Temperature -40 °C to +85 °C Acquisition / Sensitivity Tracking: -161dBm | Sensitivity: -148 dBm Power supply +10,8 V to +32,0 V DC Average Power Consumption 50mA @ 12 VDC I nterfaces 3 x Digital/analog IO 1 x USB 2.0 interface 1 x BLE 4.1 1 x Inside SIM card holder for 1,8/3 V SIM cards Dimensions ( LxWxH ) 105 mm x 83 mm x 28 mm Serial Data Rates 115200 bps Processor core RTC + Calenda 8 MB Flash (History / Firmware / Configuration) Protection grade IP67 Memory 32 Gigabyte

5. Specification | HE/LV – Flow Meter DFM 250 HPDCAN Specification Value Connecting thread M14x1.5 Nominal pressure, bar 2 MAX pressure, bar 25 Supply voltage, V 10-50 Overvoltage protection, V ≤100 Current consumption, mA (24 V/12 V), mA < 25/50 Operating temperature, °C -40..+85/ Ingress Protection Rating IP54 Relative accuracy error per chamber, %, not more than 1 Relative accuracy error, differential,% 1-3 MAX flow rate in each chamber (l/h) 300 Output Interface RS232/RS485/S6

6. Device Specification | Fuel Truck – Pulse Transmitter (for Flow Meter) Solid state pulse transmitters provide fast and accurate signaling for remote indication, totalizing and data-monitoring systems. Dependability and reliability are built in. The remote pulser operates under the same specifications as the existing internal pulse encoder Spesification Supply Voltage: 10 to 15 V DC Max Amperage: 75 mA Max Rise Time: 2 microseconds Max Fall Time: 4 microseconds Max Input Shaft Speed: 600 rpm Max Torque: 2 oz/in Output Pulse: Dual Channel @ 50 ppr Output Pulse: Single Channel @ 100 ppr Circuit Class: Class 2 Temp: -40 to 180 deg F Shaft Length: .956" Housing: Explosion Proof, Class 1 Pulse Ratio: 100:1 Wires: 4 UL listed, CSA certified (BASEEFA approved models are available) Solid state switching mechanism for reliability Easy directional sensing Flexible single or dual channel Optional one-way clutch Pulse Transmitter

7. Specification | Fuel Station – Rigid Magnetostrictive Fuel Level Sensor Technical parameters: Power supply DC12V Precision ±0.5mm Repeatability ±0.2mm Resolution 0.01mm Temperature accuracy 0.0625℃ Temperature range -40 to 60℃(-40 to 140℉) Measure range 40mm to 4500mm, customized Temperature sensors 5 points Maximum communication distance 1200m Communication RS485 Intrinsic safety parameter Power port: Ui-15V, Ii=400mA, Pi=1.2W, Ci=4.85uF, Li=0 Signal port: Ui=7.14V, Ii=147mA, Pi=0.26W, Ci=0, Li=0 Associated apparatus GSB03 intrinsic safety barrier Explosion proof grade [Ex ia] IIA T4 Ga Protection grade IP67 Definition of wires Blue            Power + Brown        RS485A White         RS485B Black          Power – Communication address 6 digits; Probe ID

8. Specification | Fuel Station – Coriolis Mass Flow Meter Titles Technical Specifications Mass flow accuracy ±[0.2% + （ zero stability /flow rate×100% ） ] Mass flow repeatability ±(1/2) ×[0.2% + （ zero stability /flow rate×100% ） ] Density range 0.2 g /cm 3 ～ 3.5g /cm 3 Density accuracy ± 0.002g /cm 3 Temperature range -60℃ ～ + 200℃ Temperature accuracy ± 1℃ Output of current loop 4mA ～ 20mA Output of frequency/pulse 0Hz ～ 10kHz Contactor capacity of a Batch Control relay 24V/ 0.1A Contactor form normal open (would be changed to normal close while special order)

9. Specification | Fuel Station – FMS Master Panel BLE 4.2 Receiver It is a radio standard for a new decade, enabling the Internet of Things. Features: Mostly new PHY; some parts derived from the Basic Rate (BR) radio New advertising mechanism, for ease of discovery & connection less MAC sed for low latency fast less MAC: used for low latency, fast transactions (e.g. 3ms from start to finish) New Generic Attribute Profile to simplify devices and the software that uses them. Asynchronous Client / Server architecture Designed to be LOWEST cost and EASY to implement Range: ~ 150 meters open field Output Power: ~ 10mW (10dBm) Max Current: ~ 15mA Latency: 3 ms Topology: Star Connections: > 2 billion Modulation: GFSK @ 2.4 GHz Robustness: Adaptive Frequency Hopping, 24-bit CRC Security: 128bit AES CCM Sleep current ~ 1µA Modes: Broadcast, Connection, Event Data Models Reads, Writes Display 10 Inch LCD Touchscreen Display Keypad 16 Button Pad Digital Key Switch Parameter, measuring unit Value Power 110~220V , 0.2A Display Size 8 inch Dimension 300x230x145 Operating Temperature 10 O C-80 C Weight 9 kg Ports RS232, RS 485

10. Specification | Fuel Station – MC-4 Controller mechanical dispenser

11. Specification | Fuel Station – RFID Wireless Nozzle Reader MT123 Specification Value READING DISTANCE  ≤150mm(Working Power: 4.2 V) WORKING TIME 72 Days(Calculated by 1 Time Fueling with 3 Minutes and 100 Times Fueling per Day) WORKING TEMPERATURE -20-+55°C TAMPER-PROOF STANDARD & GRADE Standard: GB/T15279 5.20.4   Grade: IK10 WIRELESS COMMUNICATION FREQUENCY   433 MHz POWER SUPPLY DC4.2V ± 5% Powered by Rechargeable Lithium Battery) DIMENSIONS   69.9mm(W)x100.95mm(D)x84.7mm(H) WEIGHT 200g Packing & Accessories not Included                                   REMARKS With Low Power Indication for Battery

12. Specification | Fuel Station – FMS Master Panel Specification Value READING/WRITING DISTANCE 1): 0-6m: Fixed Reader/Writer with 12dBi Antenna                      2): 0-4m: Fixed Reader/ Rriter with 7dBi Antenna                        3): 0-1.5m:Handheld Device PROTOCOL ISO18000-6C(EPC Global Class1 Gen2) WIRELESS COMMUNICATION FREQUENCY  920-925MHz WORKING MODE R/W POLARIZATION MODE Linear STORAGE CAPACITY TID: 64, EPC: 96, User: 512 DATA RATE Forward: 40-160Kbits/s                                    Backward: 40-640Kbits/s DATA PROTECTION Supports Passwords Modify, Lock and Destroy Supports Read & Write Dual Protection DATA STORAGE TIME Over 10 years(Memory Erasable over 100K Times)  WORKING TEMPERATURE -20-+70°C DIMENSIONS   23/25mm(L)x9mm(D)x3mm(H) WEIGHT 5g Packing & Accessories not Included                                     REMARKS Ceramic Material, no Drop from High Place

13. Specification | Fuel Station – Wireless Receiver MT124 Specification Value COMMUNICATION Communication with Wireless Nozzle Reader (MT123) and transmitting data to controlling system via RS232 WORKING TEMPERATURE -20-+55°C WIRELESS COMMUNICATION FREQUENCY  433 MHz POWER SUPPLY DC5V ± 5%  DIMENSIONS 244.6mm(W)x162.8mm(D)x36mm(H) WEIGHT 400g Packing & Accessories not Included                                   REMARKS With Nozzle Reader Address Identification Function

14. Specification | Fuel Station – Industrial PC