Generations of solar cells

Brief introduction about solar energy and the generations of solar energy was explained

1. Photovoltaic Solar energy

2. Introduction
Adverse effect on the climate change of the globe
the average increment of temperature of the globe
below 2°C
As suggested by many studies improving the energy
efficiency of the machinery used and avoiding rampant
use of devices causing emission of green house gases
fossil fuels which is taking the major toll on the earth’s
climate, by virtue of emission of gases like CO2, N2O and
Methane

3. Introduction
Use of non-conventional sources of energy like solar
energy, wind energy and biomass has become the
need of the hour for the mankind. At this juncture, such
measures are imperative and indispensiblefor two
important reasons
It is required to explore for renewable sources of energy
as the fossil fuels are continuously depleting.
Minimizing the use of fossil fuels is highly essential to cut
down the carbonemissionsin the interest of the climate
of the planet earth.

4. Total primary energy supply

5. The carbon emissions-world region

6. Sources of Renewable Energy and
importance of solar energy
The recent expert analysis states that the global
Green House Gas (GHG) emissions may be reduced
by 35%, if renewable energy generation targets are
met by 2030 [*]
There are different types of renewable sources of
energy or non-conventional sources of energy which
do not have any direct contribution in the increment
of green house emissions
* Energy and Climate Change: World Energy Outlook Special Report, 2015.

7. Environmental friendly sources of energy

8. Generations of Solar Cells

9. Generations of Solar Cells

10. Generations of Solar Cells

11. Generations of Solar Cells

12. First Generation Solar Cells:
The solar cells based on monocrystallineand
polycrystalline Silicon constitute the first generation solar
cells
Advantages: raw material availability, highefficiency
and long term stability, very well developed Silicon
processing technology
the physics of these solar cells is well understood
efficiency of ~24%

13. First Generation Solar Cells:
Disadvantages:costeffectiveness
Silicon being an indirect band gap material has a low light absorption
coefficient.
Such a property of silicon requires larger thickness of material for
better optical absorption.
Thicker material films when used in the device, demand longer charge
diffusion lengths which put a constraint on the quality of the material.
That means, the material films used in solar cell application are ought
to be defect free to attain better efficiency.
The fluctuations in the availability of solar grade silicon have impeded
the pace of
expansion of the solar cell installations.

14. First Generation Solar Cells:
Challenges
Silicon in its monocrystallineand polycrystalline forms is
inevitable
reduce the cost or explore for new materials
This naturally gave birth to a new generation namely the
second generation of solar cells

15. Second Generation of Solar Cells:
Amorphous Silicon apparently seemed to emerge as a solution to the cost
factor from its crystalline counter parts
Amorphous silicon solar cells suffer from staeblerwronskieffect
Due to this deleterious effect the solar cell performance temporally
degrades under illumination
In this effect, the incident photons create electron-hole pairs due to the
breakage of si-sibonding in a-Si resulting in dangling bonds
These appear as sub-band gap states leading to recombination of
electrons and so decreased performance of the
cellmoduleefficiency of around 8.5%

16. Cu2S/CdSbased solar cells
Advantages:
 These cells contain active polycrystalline CIGS layers with Mo coated
glass
sheets or steel substrates using energy economic methods.
 Flexible substrates may be used to make solar cells using these materials.
 These are relatively environmentally friendly solar cells as they employ
very
little cadmium in the form of CdS

17. Disadvantages:
 These are not as efficient as crystalline silicon based solar cells
 Manufacturing complexities still exist due to these being ternary and
quartenary
compounds
 The prices are not competitive as compared to CdTe
 Also use rare elements like Indium giving rise to more practical difficulties.

18. Cadmium Telluride solar cells have the following advantages and
disadvantages:
Advantages:
 These cells in combination with CdS, match better with the solar
spectrum
 Cadmium is an abundant metal.

19. Disadvantages:
 It has lower device efficiency as compared to crystalline silicon
 Tellurium is a very rare element raising doubts over the CdTePV
expansion.
 Cadmium is highly cytotoxic and CdTeis also a toxic compound if
ingested.
In all, it may be concluded that, second generation solar cells have not
really been
successful in finding alternative technologies to silconsolar cells.