Guardsman NEW PPE Catalogue | Preview | Hand Protection
PaulEames3
824 views
42 slides
Sep 19, 2018
Slide 1 of 42
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
About This Presentation
Preview of the NEW Guardsman PPE catalogue > Hand Protection
Slide Content
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected] 105
General Handling Gloves 109 - 123
Mechanical Hazard 124 - 128
Chemical Hazard 129 - 132
Disposable Gloves 133 - 136
Thermal Protection 137 - 139
Specialist Protection 140 - 144
SCAN HERE FOR
OUR FULL
RANGE
HAND
Compatible with:
467836 Page 105
467837
467838
Compatible with:
467836 Page 105
467837
467838
Compatible with:
467836 Page 105
467837
467838
Compatible with:
467836 Page 105
467837
467838
Compatible with:
467836 Page 105
467837
467838
PROTECTION
MASTER FILE IDML 3.indd 105 07/08/18 14:12:07
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected] 105
General Handling Gloves 109 - 123
Mechanical Hazard 124 - 128
Chemical Hazard 129 - 132
Disposable Gloves 133 - 136
Thermal Protection 137 - 139
Specialist Protection 140 - 144
SCAN HERE FOR
OUR FULL
RANGE
HAND
Compatible with:
467836 Page 105
467837
467838
Compatible with:
467836 Page 105
467837
467838
Compatible with:
467836 Page 105
467837
467838
Compatible with:
467836 Page 105
467837
467838
Compatible with:
467836 Page 105
467837
467838
PROTECTION
MASTER FILE IDML 3.indd 105 07/08/18 14:12:07
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected] [email protected]
European Standards
Implies that the gloves comply with the basic requirements laid down by the EEC directive: Personal Protective Equipment.
Simple Design (Category 1)
For areas of ‘minimal risk’ where the effects of not wearing a glove are easily reversible or superficial. Such products are
self-certified.
Intermediate Design (Category 2)
For areas of specific risk i.e. mechanical risks. Such products will have been EC type tested against European test methods
and certified by a notified body.
Complex Design (Category 3)
For areas/applications that can seriously or irreversibly harm the health. Such products, in addition to the CE type test, will
also have to be either produced under an approved quality system OR be type tested on an annual basis.
Health & Safety
With industry’s increasingly complex and sensitive manufacturing and handling processes, there is a growing insistence on the use
of “job fitted” gloves that meet each user’s specific requirements; hence our offering of a wider and more comprehensive range
of gloves in this section.
CHOOSE THE RIGHT HAND PROTECTION
Glove Size as text:
Glove Size as number:
XS
6 7 8 9 10 11
S M L XL XXL
Knowledge Centre
Standards Update
During 2016 a new version of EN388: 2003, Protection against Mechanical Hazards, was published. It allows products offering higher
classifications of cut levels to be identified. Gloves made to the 2003 standard can continue to be sold until April 2019 where the
new 2016 revision comes into force.
What’s changed?
Any sample tested for cut resistance using the existing coup method, which blunts the blade used in the test, will have to be
additionally tested using the ISO cut method.
There will be 6 cut levels defined on the ISO cut method. Levels A, B and C are new. Level D is of a different value previously quoted
as level 4. Level E is the same value previouly quoted as level 5. Level F is also new and is the highest cut resistance value.
LEVEL A
2 5 10 15 22 30
LEVEL B LEVEL C LEVEL D LEVEL E LEVEL F
Back of the hand protection (impact protection testing) is now included.
3 - means the sample achieved level 3 for abrasion
4 - means the sample achieved level 4 for coup cut
4 - means the sample achieved level 4 for tear
3 - means the sample achieved level 3 for puncture
E - means the sample achieved level E for ISO cut which was tested due to blade blunting during the coup test
P - means the sample passes the requirements for impact protection
• This change only affects new products being certified once the standard has been published. This does not apply retrospectivey.
• Over the years, you will see more and more products carrying the new standard
• EN420: General requirements for Protective Gloves - New Test Method being added (prEN 16778) for the determination of the
presence of Dimethylformamide (DMF), a toxic ingredient of insecticide sometimes used in the leather tanning process
• EN374-1: Mandatory Challenge Chemicals increased to 18 from 12 & Creation of 3 levels of Permeation Testing, i.e. Type A gloves
(must pass on 6 Challenge chemicals), Type B Gloves (3 Challenge Chemicals) & Type C Gloves (1 Challenge chemical)
• EN374-2: Claims for micro-organism resistance must now satisfy EN374-5. If virus protection is claimed, it must pass ISO 16604
(EN374-2 for bacteria and fungi)
• EN374-3: Permeation of pesticides now included and the Standard for this hazard will now fall under EN16523-1
• EN374-4: Determination of Resistance to Degradation determined by measuring the permeation resistance before and after 60
mins exposure to a chemical. Degradation results must be included in the User information for those chemicals which correspond
to the letters under the pictogram.
3443EP
What does this mean for you?
Glove
Sizing
Chart
MASTER FILE IDML 3.indd 106 07/08/18 14:12:13
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected] [email protected]
European Standards
Implies that the gloves comply with the basic requirements laid down by the EEC directive: Personal Protective Equipment.
Simple Design (Category 1)
For areas of ‘minimal risk’ where the effects of not wearing a glove are easily reversible or superficial. Such products are
self-certified.
Intermediate Design (Category 2)
For areas of specific risk i.e. mechanical risks. Such products will have been EC type tested against European test methods
and certified by a notified body.
Complex Design (Category 3)
For areas/applications that can seriously or irreversibly harm the health. Such products, in addition to the CE type test, will
also have to be either produced under an approved quality system OR be type tested on an annual basis.
Health & Safety
With industry’s increasingly complex and sensitive manufacturing and handling processes, there is a growing insistence on the use
of “job fitted” gloves that meet each user’s specific requirements; hence our offering of a wider and more comprehensive range
of gloves in this section.
CHOOSE THE RIGHT HAND PROTECTION
Glove Size as text:
Glove Size as number:
XS
6 7 8 9 10 11
S M L XL XXL
Knowledge Centre
Standards Update
During 2016 a new version of EN388: 2003, Protection against Mechanical Hazards, was published. It allows products offering higher
classifications of cut levels to be identified. Gloves made to the 2003 standard can continue to be sold until April 2019 where the
new 2016 revision comes into force.
What’s changed?
Any sample tested for cut resistance using the existing coup method, which blunts the blade used in the test, will have to be
additionally tested using the ISO cut method.
There will be 6 cut levels defined on the ISO cut method. Levels A, B and C are new. Level D is of a different value previously quoted
as level 4. Level E is the same value previouly quoted as level 5. Level F is also new and is the highest cut resistance value.
LEVEL A
2 5 10 15 22 30
LEVEL B LEVEL C LEVEL D LEVEL E LEVEL F
Back of the hand protection (impact protection testing) is now included.
3 - means the sample achieved level 3 for abrasion
4 - means the sample achieved level 4 for coup cut
4 - means the sample achieved level 4 for tear
3 - means the sample achieved level 3 for puncture
E - means the sample achieved level E for ISO cut which was tested due to blade blunting during the coup test
P - means the sample passes the requirements for impact protection
• This change only affects new products being certified once the standard has been published. This does not apply retrospectivey.
• Over the years, you will see more and more products carrying the new standard
• EN420: General requirements for Protective Gloves - New Test Method being added (prEN 16778) for the determination of the
presence of Dimethylformamide (DMF), a toxic ingredient of insecticide sometimes used in the leather tanning process
• EN374-1: Mandatory Challenge Chemicals increased to 18 from 12 & Creation of 3 levels of Permeation Testing, i.e. Type A gloves
(must pass on 6 Challenge chemicals), Type B Gloves (3 Challenge Chemicals) & Type C Gloves (1 Challenge chemical)
• EN374-2: Claims for micro-organism resistance must now satisfy EN374-5. If virus protection is claimed, it must pass ISO 16604
(EN374-2 for bacteria and fungi)
• EN374-3: Permeation of pesticides now included and the Standard for this hazard will now fall under EN16523-1
• EN374-4: Determination of Resistance to Degradation determined by measuring the permeation resistance before and after 60
mins exposure to a chemical. Degradation results must be included in the User information for those chemicals which correspond
to the letters under the pictogram.
3443EP
What does this mean for you?
Glove
Sizing
Chart
MASTER FILE IDML 3.indd 106 07/08/18 14:12:13
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected] 107
Knowledge Centre
EN 374-3 Chemical & Micro-Organisms
This standard specifies the capability of gloves to protect the user against chemicals and/or
micro-organisms.
Resistance to penetration by micro-organisms.
Referred to as acceptable quality level (AQL).
EN 388 Mechanical Hazards
This standard applies to all kinds of protective gloves giving protection from mechanical risks, in respect of physical
problems caused by abrasion, blade cut, puncture or tearing. This standard also covers risk of electrostatic discharge.
A) Resistance to abrasion – Rating 0-4
B) Blade cut resistance – Rating 0-5
C) Tear resistance – Rating 0-4
D) Puncture resistance – Rating 0-4
E ) ISO 13997 – A-F
F ) Impact – Pass/Fail
EN 407 Thermal Hazards
This standard specifies thermal performance for protective gloves against heat and/or fire.
A) Burning behaviour – Rating 0-4
B) Contact heat – Rating 0-4
C) Convective heat – Rating 0-4
D) Radiant heat – Rating 0-4
E) Small splashes of molten metal – Rating 0-4
F) Large splashes of molten metal – Rating 0-4
EN 659 Thermal Hazards
This standard defines performance requirements for gloves designed to protect fire fighters against heat and
flames.
EN 511 Protection from cold
This standard applies to gloves which protect the hands against convective and contact cold.
A) Resistance to convective cold Rating 0-4
B) Resistance to contact cold Rating 0-4
C) Permeability to water Rating 0-1
Food Handling
Gloves suitable for food handling must carry this symbol or be labelled ‘For Food Use’.
CE Mark
CE implies that the gloves comply with the basic requirements laid down by the EEC directive: Personal Protective
Equipment.
EN 421 Radioactive Hazards
This standard lays down test methods and performance criteria for gloves offering protection against ionising
radiation and radioactive contamination.
EN 374-2 Chemical & Micro-organisms
Low Chemical resistant or Waterproof glove pictogram is to be used for those gloves that do not achieve a
breakthrough time of at least 30 minutes against at least three chemicals from the
pre-defined list (but which comply with the Penetration test).
The european standard for EN388
was revised in 2016 which added
2 extra measures within the gloves
saftey ratings.
THE STANDARDS
Update
OLD NEW
Contact Temp
o
CThreshold Time Seconds
100
250
350
500
>15
>15
>15
>15
EN388:4.4.1.1
Abrasion (0-4) Tear (0-4)
Cut (0-5) Puncture (0-4)
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
EN388:2016
4.1.1.1.E.P
A.B.C.D.E.F
NEW
MASTER FILE IDML 3.indd 107 07/08/18 14:12:16
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected] 107
Knowledge Centre
EN 374-3 Chemical & Micro-Organisms
This standard specifies the capability of gloves to protect the user against chemicals and/or
micro-organisms.
Resistance to penetration by micro-organisms.
Referred to as acceptable quality level (AQL).
EN 388 Mechanical Hazards
This standard applies to all kinds of protective gloves giving protection from mechanical risks, in respect of physical
problems caused by abrasion, blade cut, puncture or tearing. This standard also covers risk of electrostatic discharge.
A) Resistance to abrasion – Rating 0-4
B) Blade cut resistance – Rating 0-5
C) Tear resistance – Rating 0-4
D) Puncture resistance – Rating 0-4
E ) ISO 13997 – A-F
F ) Impact – Pass/Fail
EN 407 Thermal Hazards
This standard specifies thermal performance for protective gloves against heat and/or fire.
A) Burning behaviour – Rating 0-4
B) Contact heat – Rating 0-4
C) Convective heat – Rating 0-4
D) Radiant heat – Rating 0-4
E) Small splashes of molten metal – Rating 0-4
F) Large splashes of molten metal – Rating 0-4
EN 659 Thermal Hazards
This standard defines performance requirements for gloves designed to protect fire fighters against heat and
flames.
EN 511 Protection from cold
This standard applies to gloves which protect the hands against convective and contact cold.
A) Resistance to convective cold Rating 0-4
B) Resistance to contact cold Rating 0-4
C) Permeability to water Rating 0-1
Food Handling
Gloves suitable for food handling must carry this symbol or be labelled ‘For Food Use’.
CE Mark
CE implies that the gloves comply with the basic requirements laid down by the EEC directive: Personal Protective
Equipment.
EN 421 Radioactive Hazards
This standard lays down test methods and performance criteria for gloves offering protection against ionising
radiation and radioactive contamination.
EN 374-2 Chemical & Micro-organisms
Low Chemical resistant or Waterproof glove pictogram is to be used for those gloves that do not achieve a
breakthrough time of at least 30 minutes against at least three chemicals from the
pre-defined list (but which comply with the Penetration test).
The european standard for EN388
was revised in 2016 which added
2 extra measures within the gloves
saftey ratings.
THE STANDARDS
Update
OLD NEW
Contact Temp
o
CThreshold Time Seconds
100
250
350
500
>15
>15
>15
>15
EN388:4.4.1.1
Abrasion (0-4) Tear (0-4)
Cut (0-5) Puncture (0-4)
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
EN388:2016
4.1.1.1.E.P
A.B.C.D.E.F
NEW
MASTER FILE IDML 3.indd 107 07/08/18 14:12:16
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Easy-Tear Safety Gloves
Ideal for work-types that carry the risk of getting your hands caught in equipment
or machinery.
Code: 466323
• Polyurethane palm coated gloves
• Super-light design for a near-weightless feel
• Excellent dexterity for the most tactile handling applications
• 18 gauge seamless knitted high grade nylon with polyester binding
• Elasticated wrists with cuffs to prevent debris from entering and to provide a perfect fit
• Breathable to reduce heat and sweat build-up and increase user comfort
• Ideal for mechanical hazards where a risk of getting your hand caught in equipment is present
• Sizes 6-11
• Conforms to EN 420 : 2003 + A1 : 2009, EN 388 : 2003 2.1.1.0
Features
New
MASTER FILE IDML 3.indd 108 07/08/18 14:12:20
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Easy-Tear Safety Gloves
Ideal for work-types that carry the risk of getting your hands caught in equipment
or machinery.
Code: 466323
• Polyurethane palm coated gloves
• Super-light design for a near-weightless feel
• Excellent dexterity for the most tactile handling applications
• 18 gauge seamless knitted high grade nylon with polyester binding
• Elasticated wrists with cuffs to prevent debris from entering and to provide a perfect fit
• Breathable to reduce heat and sweat build-up and increase user comfort
• Ideal for mechanical hazards where a risk of getting your hand caught in equipment is present
• Sizes 6-11
• Conforms to EN 420 : 2003 + A1 : 2009, EN 388 : 2003 2.1.1.0
Features
New
MASTER FILE IDML 3.indd 108 07/08/18 14:12:20
109
Bleached Open Cuff
Mens Stockinette Glove
Mens Cotton Stockinette
Knit-wrist Gloves
Mens Cotton
Chrome Leather Palm Gloves
Pick & Go Blue Latex
Dotted White Nylon Gloves
Orange Criss Cross
PVC Grip Gloves
Product Code: 460848Product Code: 460983
Product Code: 460860 Product Code: 460998 Product Code: 460859
• Bleached 100% natural cotton
• Stockinette manufactured in fourchette pattern.
• Reversible design
• 25cm
• For minimal risks only
• Comfort fitting
• Sizes: one size
• Bleached 100% natural cotton
• Stockinette manufactured in fourchette pattern.
• Knit wrist for a better fit which reduces debris from entering
• For minimal risks only
• Comfort fitting
• Sizes: one size
• Men’s version
• Lightweight yet durable feel
• Palm made from chrome leather
• 100% cotton back
• Straight thumb
• Knitted wrist for added comfort and
reduces debris from entering
• Comfortable design from long
• periods of use
• CE for minimal risks only
• Sizes: One size
• Blue PVC dots on the palm provide
elevated levels of grip
• Lightweight white nylon liner
• Dexterous and flexible
• Elasticated knitted wrist
• Ideal for general handling, assembly &
packing
• Seamless knitted 100% 13 gauge white
nylon liner
• Low linting properties
• Conforms to EN 388 2.1.4.X
• Sizes 7-10
• High grip PVC lattice finish on a knitted
base
• Dexterous for tactile work types
• Provides excellent grip
• Knitted wrist ensure a comfortable fit
• Typical applications:
• Local authorities, construction, light gen-
eral handling & maintenance work.
• Conforms to EN 388 Intermediate Design
• Sizes: One size
GENERAL HANDLING GLOVES
Code: 466323
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 109 07/08/18 14:12:23
Bleached Open Cuff
Mens Stockinette Glove
Mens Cotton Stockinette
Knit-wrist Gloves
Mens Cotton
Chrome Leather Palm Gloves
Pick & Go Blue Latex
Dotted White Nylon Gloves
Orange Criss Cross
PVC Grip Gloves
Product Code: 460848Product Code: 460983
Product Code: 460860 Product Code: 460998 Product Code: 460859
• Bleached 100% natural cotton
• Stockinette manufactured in fourchette pattern.
• Reversible design
• 25cm
• For minimal risks only
• Comfort fitting
• Sizes: one size
• Bleached 100% natural cotton
• Stockinette manufactured in fourchette pattern.
• Knit wrist for a better fit which reduces debris from entering
• For minimal risks only
• Comfort fitting
• Sizes: one size
• Men’s version
• Lightweight yet durable feel
• Palm made from chrome leather
• 100% cotton back
• Straight thumb
• Knitted wrist for added comfort and
reduces debris from entering
• Comfortable design from long
• periods of use
• CE for minimal risks only
• Sizes: One size
• Blue PVC dots on the palm provide
elevated levels of grip
• Lightweight white nylon liner
• Dexterous and flexible
• Elasticated knitted wrist
• Ideal for general handling, assembly &
packing
• Seamless knitted 100% 13 gauge white
nylon liner
• Low linting properties
• Conforms to EN 388 2.1.4.X
• Sizes 7-10
• High grip PVC lattice finish on a knitted
base
• Dexterous for tactile work types
• Provides excellent grip
• Knitted wrist ensure a comfortable fit
• Typical applications:
• Local authorities, construction, light gen-
eral handling & maintenance work.
• Conforms to EN 388 Intermediate Design
• Sizes: One size
GENERAL HANDLING GLOVES
Code: 466323
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 109 07/08/18 14:12:23
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Grab “N” Grip Latex Palm
Coated Gloves
Showa 310 Orange Grip Latex
Yellow Knitwrist Gloves
Showa 380 Black Nitrile Foam
Coated Blue Knitwrist Gloves
Showa 377 Fully Coated Black/Blue
Nitrile Knitwrist Gloves
Grab “N” Grip Value
Latex Coated
Economy Gloves
• Crinkle latex palm coating
• Yellow polycotton liner
• Excellent wet and dry grip
• Good abrasion and puncture resistance
• Breathable open back
• Knitted wrist for a improved fitting and
reduces debris from entering
• Sizes: 8-11 (Orange, Green & Blue) 9-11
(Black)
• Pack of 12 pairs
• Conforms to EN388 2.2.4.2
• Crinkle latex palm coating
• Economy polycotton liner
• Good wet and dry grip
• Good abrasion and puncture resistance
• Breathable open back
• Knitted wrist
• Excellent value
• Sizes: 8-11
• Pack of 12 pairs
• Conforms to EN388 2.2.4.2
• A flexible, robust glove offering great
dexterity and with good resistance to
tearing
• Breathable back of hand to reduce
perspiration
• Surface provides tactile feel and better
grip
• Greater hygiene
• Designed for easy movement and
continuous wear
• No irritation by seams in contact with the
skin
• Sizes: M-XL
• EN388 2.1.4.2
• Coated palm.
• Foamed embossed finish.
• Anatomical shape.
• Protects hands from grease, oil and
abrasion.
• Elasticated cuff.
• Breathable Material.
• Seamless knit
• Sizes: S-XL
• Conforms to EN388 3.1.2.1
• Fully coated, extra coating on palm
• Reinforced knit cuff, scalloped edge
• Standard finish
• Without special treatment
• Anatomical shape
• Seamless knit
• Sizes: S-2XL
• Conforms to EN388 4.1.2.1
value
Product Code: 461782
GENERAL HANDLING GLOVES
Product Code: 461778 - Orange
Product Code: 460886 - Blue
Product Code: 461776 - Green
Product Code: 461777 - Black Product Code: 462844 - Orange
Product Code: 464228 - Green
Juba Grip 251 Latex Polycotton
Knitwrist Gloves
• Flexible and robust with excellent dexterity
for heavy duty manual handling
• Polyester and cotton seamless liner with
crinkle latex palm coating
• Excellent grip in dry environment but not
recommended for use in oily conditions
• Seamless design ensures good
ergonomics
• Open back design is highly breathable
assuring comfort at all times
• Elasticated knitted wrist for a secure fit
• Conforms to EN 388 3.1.4.2
• Sizes: 8 (M)-10(XL)
Product Code: 465881
Product Code: 460402 Product Code: 460406 Product Code: 460535
HAND PROTECTION
MASTER FILE IDML 3.indd 110 07/08/18 14:12:27
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Grab “N” Grip Latex Palm
Coated Gloves
Showa 310 Orange Grip Latex
Yellow Knitwrist Gloves
Showa 380 Black Nitrile Foam
Coated Blue Knitwrist Gloves
Showa 377 Fully Coated Black/Blue
Nitrile Knitwrist Gloves
Grab “N” Grip Value
Latex Coated
Economy Gloves
• Crinkle latex palm coating
• Yellow polycotton liner
• Excellent wet and dry grip
• Good abrasion and puncture resistance
• Breathable open back
• Knitted wrist for a improved fitting and
reduces debris from entering
• Sizes: 8-11 (Orange, Green & Blue) 9-11
(Black)
• Pack of 12 pairs
• Conforms to EN388 2.2.4.2
• Crinkle latex palm coating
• Economy polycotton liner
• Good wet and dry grip
• Good abrasion and puncture resistance
• Breathable open back
• Knitted wrist
• Excellent value
• Sizes: 8-11
• Pack of 12 pairs
• Conforms to EN388 2.2.4.2
• A flexible, robust glove offering great
dexterity and with good resistance to
tearing
• Breathable back of hand to reduce
perspiration
• Surface provides tactile feel and better
grip
• Greater hygiene
• Designed for easy movement and
continuous wear
• No irritation by seams in contact with the
skin
• Sizes: M-XL
• EN388 2.1.4.2
• Coated palm.
• Foamed embossed finish.
• Anatomical shape.
• Protects hands from grease, oil and
abrasion.
• Elasticated cuff.
• Breathable Material.
• Seamless knit
• Sizes: S-XL
• Conforms to EN388 3.1.2.1
• Fully coated, extra coating on palm
• Reinforced knit cuff, scalloped edge
• Standard finish
• Without special treatment
• Anatomical shape
• Seamless knit
• Sizes: S-2XL
• Conforms to EN388 4.1.2.1
value
Product Code: 461782
GENERAL HANDLING GLOVES
Product Code: 461778 - Orange
Product Code: 460886 - Blue
Product Code: 461776 - Green
Product Code: 461777 - Black Product Code: 462844 - Orange
Product Code: 464228 - Green
Juba Grip 251 Latex Polycotton
Knitwrist Gloves
• Flexible and robust with excellent dexterity
for heavy duty manual handling
• Polyester and cotton seamless liner with
crinkle latex palm coating
• Excellent grip in dry environment but not
recommended for use in oily conditions
• Seamless design ensures good
ergonomics
• Open back design is highly breathable
assuring comfort at all times
• Elasticated knitted wrist for a secure fit
• Conforms to EN 388 3.1.4.2
• Sizes: 8 (M)-10(XL)
Product Code: 465881
Product Code: 460402 Product Code: 460406 Product Code: 460535
HAND PROTECTION
MASTER FILE IDML 3.indd 110 07/08/18 14:12:27
111
Keep Safe Leather Unlined
Drivers Glove
Keep Safe Thermal Insulating Grip Glove
Lined Leather Drivers Glove LHDG
• 13 gauge Thermolite thermal
knit glove
• Optimum warmth for work-
types in cold conditions
• Single side dot coating for
grip and abrasion resistance
• Knit wrist and cuff for a closer
fit and prevent debris from
entering
• Size: One size
• Conforms to EN388 1.1.3.1
Intermediate Design
• Men’s Yellow Soft Touch Cowhide Drivers’ Glove
• Unlined
• Elasticated band on back for a close fit
• Standard quality finish
• Excellent fitting and comfortable to wear over long periods
of use
• Durable design built to withstand demanding work types
• Sizes: One size
• Conforms to EN 388 3.1.1.2 Intermediate Design
• Men’s yellow soft touch
Leather Lined Drivers’ Glove
• leather wing thumb pattern
• Elasticated band on back for
a close fit
• High quality finish
• Fully fleece lined
• Edge binding
• Durable design
• Sizes: 8-10
• Conforms to EN 388 2.1.3.2
Intermediate Design
Product Code: 466734
Product Code: 467324
Product Code: 461782
GENERAL HANDLING GLOVES
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 111 07/08/18 14:12:35
Keep Safe Leather Unlined
Drivers Glove
Keep Safe Thermal Insulating Grip Glove
Lined Leather Drivers Glove LHDG
• 13 gauge Thermolite thermal
knit glove
• Optimum warmth for work-
types in cold conditions
• Single side dot coating for
grip and abrasion resistance
• Knit wrist and cuff for a closer
fit and prevent debris from
entering
• Size: One size
• Conforms to EN388 1.1.3.1
Intermediate Design
• Men’s Yellow Soft Touch Cowhide Drivers’ Glove
• Unlined
• Elasticated band on back for a close fit
• Standard quality finish
• Excellent fitting and comfortable to wear over long periods
of use
• Durable design built to withstand demanding work types
• Sizes: One size
• Conforms to EN 388 3.1.1.2 Intermediate Design
• Men’s yellow soft touch
Leather Lined Drivers’ Glove
• leather wing thumb pattern
• Elasticated band on back for
a close fit
• High quality finish
• Fully fleece lined
• Edge binding
• Durable design
• Sizes: 8-10
• Conforms to EN 388 2.1.3.2
Intermediate Design
Product Code: 466734
Product Code: 467324
Product Code: 461782
GENERAL HANDLING GLOVES
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 111 07/08/18 14:12:35
112
New
Introducing our newest addition to our cost-effective hand protection range.
Specifically designed to keep your costs low and your staff safe.
JUBA GLOVES
Your hand protection. Covered.
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
GET A GRIP ON YOUR WORK
112
MASTER FILE IDML 3.indd 112 07/08/18 14:12:38
New
Introducing our newest addition to our cost-effective hand protection range.
Specifically designed to keep your costs low and your staff safe.
JUBA GLOVES
Your hand protection. Covered.
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
GET A GRIP ON YOUR WORK
112
MASTER FILE IDML 3.indd 112 07/08/18 14:12:38
113
Juba Smart Tip H4120 Nitrile Gloves
Juba Grippaz Nitrile Powder-Free
Disposable Gloves
Juba Grippaz Black Nitrile Disposable
Gloves
Product Code: 465885 Product Code: 465872 Product Code: 468961
• Light and flexible Juba Smart Tip Nitrile Foam
Palm Coated Gloves can be used with any
touch-screen device while keeping the glove
on.
• Comfortable ergonomic design
• Seamless and optimal adjustment to the hand
with much touch.
• Nitrile coating allows excellent breathability
and dexterity in oily environments
• Conforms to EN388 3.1.2.1
• Sizes: S-XL
• Food safe
• Chemical resistant Juba Gripazz ambidextrous
Orange Nitrile Powder-Free Disposable Gloves
• Durable in oily environments
• Double sided fish scale grip on palm, back and
inside for extra grip
• 100% nitrile, no latex, no protein allergy risk
• Beaded cuffs
• EN 474-2, EN474-3, Food approved
• Quantity: Pack of 50
• Fish scale superior grip & ambidexterous design
• Powder-free
• Textured inside to maximize the grip
• Good chemical resistance
• They can be used with an inner glove
• Maximum level of dexterity according to CE
• Suitable for people allergic to latex
• Suitable for alimentary use according to
directive 10/2011
• Sizes: L-XL
• Pack of 50
JUBA GLOVES
HAND PROTECTION
Juba Winter 252 Thermal Lined Gloves
Product Code: 465377
• Inner terry loop protects from coldness
with thermal insulation
• Polycotton blend
• Rough latex coating on palm
• Not suitable for oily conditions
• Glove may loose its insulation properties
if it is wet
• Conforms to EN 388 2.2.4.1 and
EN511 010
• Sizes: M-XL
Juba Grip 251 Orange Latex Gloves
Product Code: 465881
• Latex Coated Gloves.
• Light crinkle latex palm and fingers coated.
• Great dry and wet grip.
• Seamless design ensures a comfortable
natural fit
• Conforms to EN388 3.1.4.2
• Sizes: M-XL
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
Juba Econit Nitrile Foam Gloves
Product Code: 464549
• Cost-effective to keep you safe at an
affordable price
• Light & flexible design
• Nitrile foam protective gloves offers sure grip in
oily conditions
• Excellent resistance to abrasion
• 15 gauge nylon & lycra liner for maximum
comfort and usability
• Conforms to EN388 4.1.3.2
• Sizes: S-2XL
MASTER FILE IDML 3.indd 113 07/08/18 14:12:38
Juba Smart Tip H4120 Nitrile Gloves
Juba Grippaz Nitrile Powder-Free
Disposable Gloves
Juba Grippaz Black Nitrile Disposable
Gloves
Product Code: 465885 Product Code: 465872 Product Code: 468961
• Light and flexible Juba Smart Tip Nitrile Foam
Palm Coated Gloves can be used with any
touch-screen device while keeping the glove
on.
• Comfortable ergonomic design
• Seamless and optimal adjustment to the hand
with much touch.
• Nitrile coating allows excellent breathability
and dexterity in oily environments
• Conforms to EN388 3.1.2.1
• Sizes: S-XL
• Food safe
• Chemical resistant Juba Gripazz ambidextrous
Orange Nitrile Powder-Free Disposable Gloves
• Durable in oily environments
• Double sided fish scale grip on palm, back and
inside for extra grip
• 100% nitrile, no latex, no protein allergy risk
• Beaded cuffs
• EN 474-2, EN474-3, Food approved
• Quantity: Pack of 50
• Fish scale superior grip & ambidexterous design
• Powder-free
• Textured inside to maximize the grip
• Good chemical resistance
• They can be used with an inner glove
• Maximum level of dexterity according to CE
• Suitable for people allergic to latex
• Suitable for alimentary use according to
directive 10/2011
• Sizes: L-XL
• Pack of 50
JUBA GLOVES
HAND PROTECTION
Juba Winter 252 Thermal Lined Gloves
Product Code: 465377
• Inner terry loop protects from coldness
with thermal insulation
• Polycotton blend
• Rough latex coating on palm
• Not suitable for oily conditions
• Glove may loose its insulation properties
if it is wet
• Conforms to EN 388 2.2.4.1 and
EN511 010
• Sizes: M-XL
Juba Grip 251 Orange Latex Gloves
Product Code: 465881
• Latex Coated Gloves.
• Light crinkle latex palm and fingers coated.
• Great dry and wet grip.
• Seamless design ensures a comfortable
natural fit
• Conforms to EN388 3.1.4.2
• Sizes: M-XL
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
Juba Econit Nitrile Foam Gloves
Product Code: 464549
• Cost-effective to keep you safe at an
affordable price
• Light & flexible design
• Nitrile foam protective gloves offers sure grip in
oily conditions
• Excellent resistance to abrasion
• 15 gauge nylon & lycra liner for maximum
comfort and usability
• Conforms to EN388 4.1.3.2
• Sizes: S-2XL
MASTER FILE IDML 3.indd 113 07/08/18 14:12:38
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
• The Perfect Poly® glove features seamless and
lightweight polyamide liners with PU coating.
• The tight knit gives the glove fantastic dexterity and
comfort , limits the penetration of dirt and offers an
incredible tactile touch.
• The ventilated back optimise the glove’s breathability.
• Non pilling, the polyamide is suitable for precision work.
• Sizes: 6-11
• Conforms to EN388 4.1.3.1
Honeywell 2100250 Grey Lightweight PU Coated
Knit wrist Safety Gloves
Polyco Matrix P Black PU
Coated Lightweight Gloves
Product Code: 460160
PU COATED GLOVES - GENERAL HANDLING NITRILE COATED GLOVES - GENERAL HANDLING
Lightweight Fully
Coated Nitrile Knitwear Gloves
Product Code: Size 7 - 463226
Product Code: Size 8 - 463227
Product Code: Size 9 - 461280
Product Code: Size 10 - 462894
Product Code: Size 11 - 463228
• Polyurethane palm coating
• Knitted cotton glove liner
• Knitted wrist for added comfort, fitting and reduction of debris
entering
• Breathable for added comfort and reduced moisture build-up
• High level of dexterity
• High level of grip
• Conforms to EN388 3.1.3.1
HAND PROTECTION
MASTER FILE IDML 3.indd 114 07/08/18 14:12:42
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
• The Perfect Poly® glove features seamless and
lightweight polyamide liners with PU coating.
• The tight knit gives the glove fantastic dexterity and
comfort , limits the penetration of dirt and offers an
incredible tactile touch.
• The ventilated back optimise the glove’s breathability.
• Non pilling, the polyamide is suitable for precision work.
• Sizes: 6-11
• Conforms to EN388 4.1.3.1
Honeywell 2100250 Grey Lightweight PU Coated
Knit wrist Safety Gloves
Polyco Matrix P Black PU
Coated Lightweight Gloves
Product Code: 460160
PU COATED GLOVES - GENERAL HANDLING NITRILE COATED GLOVES - GENERAL HANDLING
Lightweight Fully
Coated Nitrile Knitwear Gloves
Product Code: Size 7 - 463226
Product Code: Size 8 - 463227
Product Code: Size 9 - 461280
Product Code: Size 10 - 462894
Product Code: Size 11 - 463228
• Polyurethane palm coating
• Knitted cotton glove liner
• Knitted wrist for added comfort, fitting and reduction of debris
entering
• Breathable for added comfort and reduced moisture build-up
• High level of dexterity
• High level of grip
• Conforms to EN388 3.1.3.1
HAND PROTECTION
MASTER FILE IDML 3.indd 114 07/08/18 14:12:42
115
• Seamless knitted breathable nylon
• Good oil grip / oil resistant
• Waterproof dipping
• Knit wrist for a close fit and prevents
debris from entering
• Excellent dexterity for precise
handling work
• Quantity: Pack of 6
• Conforms to EN388 3.1.2.1
• Size 6-11
• Knitted & palm coated in Grey nitrile
• Suitable for light handling or assembly
• Breathable quality materials used for
added comfort
• Knitted wrist and full flexibility for a closer
fitting
• Highly dexterous for precise work types
• Conforms to EN388 4.1.2.1
• Size: 9-11
• Black sponge foam nitrile coating absorbs
oils and ensures a safe grip
• Black lightweight nylon liner
• High resistance to abrasion
• Excellent comfort
• Excellent grip in wet/dry/oily conditions
• Elasticated knitted wrist
• Conforms to EN388 4.1.2.1
• Size: 9&10
Guide 581 Black Nitrile Nylon
Oil Resistant Gloves
Product Code: 461780
Product Code: 460931 Product Code: 463323
Product Code: 461739-Palm Coated
Product Code: 461738-3/4 dipped
Product Code: 460849
Product Code: 467097
NITRILE COATED GLOVES - GENERAL HANDLING
KeepSafe
Nitrile Coated Polyester Gloves
KeepSafe
Black Nitrile Foam Nylon Gloves
Lightweight Fully
Coated Nitrile Knitwear Gloves
Safety Source
Grey Foam Nitrile Gloves
KeepSafe
Nitrile Palm Coated Gloves
Dexi-Flex Nitrile Coated
Micro Foam Gloves
• Interlock cotton liner build
• Elasticated knitted wrist for a closer fitting
and to stop debris from entering
• Ideal for manufacturing and cleaning
industries
• Lightweight
• Conforms to EN388 3.1.1.1
• Size: 8-10
• Black/Grey colour
• Lightweight and breathable nylon liner
• Excellent grip and dexterity
• 25% thinner than traditional foam nitrile
gloves
• Black Nitrile Microfoam finish
• For use for of dry or slightly oily precision
handling applications
• Conforms to EN388 4.1.3.1.X
• Size: 8-11
• Grey sponge foam nitrile coating
absorbs oils and ensures a secure grip
• White lightweight nylon liner
• High resistance to abrasion
• Excellent comfort
• Excellent grip in wet/dry/oily conditions
• Elasticated knitted wrist
• Conforms to EN388 3.1.2.1.X
• 7-10
• Interlock cotton liner build
• Elasticated knitted wrist for a closer
fitting and to stop debris from
entering
• Ideal for manufacturing and
cleaning industries
• Lightweight
• Conforms to EN388 3.1.1.1
• Size: 10 only
Product Code: 461834
• Cotton jersey liner, knitted wrist
• Ideal for construction, street cleaning/
refuse collection and the fishing industry
• Hard wearing build
• Elasticated knitted wrist for a secure
fitting
• Conforms to EN388 4.1.1.1
• Size: 7-10
Product Code: 460935
Keepsafe
Nitrile Fully Coated Gloves
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 115 07/08/18 14:12:46
• Seamless knitted breathable nylon
• Good oil grip / oil resistant
• Waterproof dipping
• Knit wrist for a close fit and prevents
debris from entering
• Excellent dexterity for precise
handling work
• Quantity: Pack of 6
• Conforms to EN388 3.1.2.1
• Size 6-11
• Knitted & palm coated in Grey nitrile
• Suitable for light handling or assembly
• Breathable quality materials used for
added comfort
• Knitted wrist and full flexibility for a closer
fitting
• Highly dexterous for precise work types
• Conforms to EN388 4.1.2.1
• Size: 9-11
• Black sponge foam nitrile coating absorbs
oils and ensures a safe grip
• Black lightweight nylon liner
• High resistance to abrasion
• Excellent comfort
• Excellent grip in wet/dry/oily conditions
• Elasticated knitted wrist
• Conforms to EN388 4.1.2.1
• Size: 9&10
Guide 581 Black Nitrile Nylon
Oil Resistant Gloves
Product Code: 461780
Product Code: 460931 Product Code: 463323
Product Code: 461739-Palm Coated
Product Code: 461738-3/4 dipped
Product Code: 460849
Product Code: 467097
NITRILE COATED GLOVES - GENERAL HANDLING
KeepSafe
Nitrile Coated Polyester Gloves
KeepSafe
Black Nitrile Foam Nylon Gloves
Lightweight Fully
Coated Nitrile Knitwear Gloves
Safety Source
Grey Foam Nitrile Gloves
KeepSafe
Nitrile Palm Coated Gloves
Dexi-Flex Nitrile Coated
Micro Foam Gloves
• Interlock cotton liner build
• Elasticated knitted wrist for a closer fitting
and to stop debris from entering
• Ideal for manufacturing and cleaning
industries
• Lightweight
• Conforms to EN388 3.1.1.1
• Size: 8-10
• Black/Grey colour
• Lightweight and breathable nylon liner
• Excellent grip and dexterity
• 25% thinner than traditional foam nitrile
gloves
• Black Nitrile Microfoam finish
• For use for of dry or slightly oily precision
handling applications
• Conforms to EN388 4.1.3.1.X
• Size: 8-11
• Grey sponge foam nitrile coating
absorbs oils and ensures a secure grip
• White lightweight nylon liner
• High resistance to abrasion
• Excellent comfort
• Excellent grip in wet/dry/oily conditions
• Elasticated knitted wrist
• Conforms to EN388 3.1.2.1.X
• 7-10
• Interlock cotton liner build
• Elasticated knitted wrist for a closer
fitting and to stop debris from
entering
• Ideal for manufacturing and
cleaning industries
• Lightweight
• Conforms to EN388 3.1.1.1
• Size: 10 only
Product Code: 461834
• Cotton jersey liner, knitted wrist
• Ideal for construction, street cleaning/
refuse collection and the fishing industry
• Hard wearing build
• Elasticated knitted wrist for a secure
fitting
• Conforms to EN388 4.1.1.1
• Size: 7-10
Product Code: 460935
Keepsafe
Nitrile Fully Coated Gloves
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 115 07/08/18 14:12:46
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Product Code: 467899
Product Code: 467841
Product Code: 467842
Ejendals Tegera 874 3/4 Nitrile Dipped
Precision Work Gloves
Ejendals 8802 Infinity Double-Dipped Palm Nitrile
& PU Water-based Nylon Gloves - Textured Grip
Ejendals 8804 Infinity Double-Dipped Fully Coated
Nitrile & PU Water-based Nylon Gloves - Textured Grip
Ejendals 8800 Infinity Palm Dipped
Nitrile & PU Water-based Nylon Gloves
Ejendals 8801 Infinity Palm Dipped Nitrile & PU
Water-based Nylon Gloves - Textured Grip
• Made from lightweight lycra/nylon
• ¾ dipped nitrile for excellent grip and protection
• Provides water and oil-repellent properties on the palm
and knuckle
• Good fingertip sensitivity
• Good dexterity for precise work-types
• Breathable to enhance user comfort and reduce
moisture build-up
• Suitable for a variety of light work applications.
• Knitwrist cuff for a secure fit and to stop debris from
entering
• Conforms to EN388 4.1.3.1
• Sizes: 7-11
• Made with high grade synthetic materials
• Nitrile/water based PU for a good standard of protection
and grip
• Palm-dipped
• Spandex used for a closer fitting, 15 gauge
• Smooth grip finish
• Withstands contact heat up to 100°C
• Oil and grease resistant palm
• Excellent dexterity for precision work
• Cat. II design
• EN 407, X1XXXX EN 388:2003, 4121
• Sizes: 6-11
• Made with high grade synthetic materials
• Nitrile/waterbased PU for a good standard of protection
and grip
• Palm-dipped
• Spandex used for a closer fitting, 15 gauge
• Textured foam pattern grip
• Withstands contact heat up to 100°C
• Oil and grease resistant palm
• Excellent dexterity for precision work
• Cat. II design
• EN 407, X1XXXX EN 388:2003, 4121
• Size: 6-11
NITRILE COATED GLOVES - GENERAL HANDLING NITRILE COATED GLOVES - GENERAL HANDLING
HAND PROTECTION
MASTER FILE IDML 3.indd 116 07/08/18 14:12:51
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Product Code: 467899
Product Code: 467841
Product Code: 467842
Ejendals Tegera 874 3/4 Nitrile Dipped
Precision Work Gloves
Ejendals 8802 Infinity Double-Dipped Palm Nitrile
& PU Water-based Nylon Gloves - Textured Grip
Ejendals 8804 Infinity Double-Dipped Fully Coated
Nitrile & PU Water-based Nylon Gloves - Textured Grip
Ejendals 8800 Infinity Palm Dipped
Nitrile & PU Water-based Nylon Gloves
Ejendals 8801 Infinity Palm Dipped Nitrile & PU
Water-based Nylon Gloves - Textured Grip
• Made from lightweight lycra/nylon
• ¾ dipped nitrile for excellent grip and protection
• Provides water and oil-repellent properties on the palm
and knuckle
• Good fingertip sensitivity
• Good dexterity for precise work-types
• Breathable to enhance user comfort and reduce
moisture build-up
• Suitable for a variety of light work applications.
• Knitwrist cuff for a secure fit and to stop debris from
entering
• Conforms to EN388 4.1.3.1
• Sizes: 7-11
• Made with high grade synthetic materials
• Nitrile/water based PU for a good standard of protection
and grip
• Palm-dipped
• Spandex used for a closer fitting, 15 gauge
• Smooth grip finish
• Withstands contact heat up to 100°C
• Oil and grease resistant palm
• Excellent dexterity for precision work
• Cat. II design
• EN 407, X1XXXX EN 388:2003, 4121
• Sizes: 6-11
• Made with high grade synthetic materials
• Nitrile/waterbased PU for a good standard of protection
and grip
• Palm-dipped
• Spandex used for a closer fitting, 15 gauge
• Textured foam pattern grip
• Withstands contact heat up to 100°C
• Oil and grease resistant palm
• Excellent dexterity for precision work
• Cat. II design
• EN 407, X1XXXX EN 388:2003, 4121
• Size: 6-11
NITRILE COATED GLOVES - GENERAL HANDLING NITRILE COATED GLOVES - GENERAL HANDLING
HAND PROTECTION
MASTER FILE IDML 3.indd 116 07/08/18 14:12:51
117
Product Code: 467843
Product Code: 467845
Product Code: 467844
Ejendals 8802 Infinity Double-Dipped Palm Nitrile
& PU Water-based Nylon Gloves - Textured Grip
Ejendals 8803 Infinity Double-Dipped 3/4 Palm Nitrile
& PU Water-based Nylon Gloves - Textured Grip
Ejendals 8804 Infinity Double-Dipped Fully Coated
Nitrile & PU Water-based Nylon Gloves - Textured Grip
• Double dipped palm for extra protection
• Made with high grade synthetic materials
• Nitrile/waterbased PU for a good standard of protection
and grip
• Spandex used for a closer fitting, 18 gauge
• Textured foam pattern grip
• Withstands contact heat up to 100°C
• Oil and grease resistant palm
• Excellent dexterity for precision work
• Cat. II design
• EN 407, X1XXXX EN 388:2003, 4121
• Size: 6-11
• Double dipped 3/4 waterproof palm for extra protection
• Made with high grade synthetic materials
• Nitrile/waterbased PU for a good standard of protection
and grip
• Spandex used for a closer fitting, 18 gauge
• Textured foam pattern grip
• Withstands contact heat up to 100°C
• Oil and grease resistant palm
• Excellent dexterity for precision work
• Cat. II design
• EN 407, X1XXXX EN 388:2003, 4121
• Size: 7-11
NITRILE COATED GLOVES - GENERAL HANDLING
• Double dipped fully coated & waterproof for extra
protection
• Made with high grade synthetic materials
• Nitrile/waterbased PU for a good standard of protection and
grip
• Spandex used for a closer fitting, 18 gauge
• Textured foam pattern grip
• Withstands contact heat up to 100°C
• Oil and grease resistant palm
• Excellent dexterity for precision work
• Cat. II design
• EN 407, X1XXXX EN 388:2003, 4121
• Size: 7-11
Ejendals 737 Fully Coated Black/Blue Nitrile
Knit Wrist Gloves
• Impermeable coating repels liquid.
• Flexible and durable assembly glove
• Microfoam grip finish
• Double digging provides superior grip in oily and wet
environments
• Super light seamless nylon/ Lycra lining for a closer and
comfortable fitting
• Conforms to EN388 4.1.3.1
• Size 7-11
Product Code: 460295
HAND PROTECTION
EN407 - FLAME RESISTANT
For details, see P106-107
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 117 07/08/18 14:12:55
Product Code: 467843
Product Code: 467845
Product Code: 467844
Ejendals 8802 Infinity Double-Dipped Palm Nitrile
& PU Water-based Nylon Gloves - Textured Grip
Ejendals 8803 Infinity Double-Dipped 3/4 Palm Nitrile
& PU Water-based Nylon Gloves - Textured Grip
Ejendals 8804 Infinity Double-Dipped Fully Coated
Nitrile & PU Water-based Nylon Gloves - Textured Grip
• Double dipped palm for extra protection
• Made with high grade synthetic materials
• Nitrile/waterbased PU for a good standard of protection
and grip
• Spandex used for a closer fitting, 18 gauge
• Textured foam pattern grip
• Withstands contact heat up to 100°C
• Oil and grease resistant palm
• Excellent dexterity for precision work
• Cat. II design
• EN 407, X1XXXX EN 388:2003, 4121
• Size: 6-11
• Double dipped 3/4 waterproof palm for extra protection
• Made with high grade synthetic materials
• Nitrile/waterbased PU for a good standard of protection
and grip
• Spandex used for a closer fitting, 18 gauge
• Textured foam pattern grip
• Withstands contact heat up to 100°C
• Oil and grease resistant palm
• Excellent dexterity for precision work
• Cat. II design
• EN 407, X1XXXX EN 388:2003, 4121
• Size: 7-11
NITRILE COATED GLOVES - GENERAL HANDLING
• Double dipped fully coated & waterproof for extra
protection
• Made with high grade synthetic materials
• Nitrile/waterbased PU for a good standard of protection and
grip
• Spandex used for a closer fitting, 18 gauge
• Textured foam pattern grip
• Withstands contact heat up to 100°C
• Oil and grease resistant palm
• Excellent dexterity for precision work
• Cat. II design
• EN 407, X1XXXX EN 388:2003, 4121
• Size: 7-11
Ejendals 737 Fully Coated Black/Blue Nitrile
Knit Wrist Gloves
• Impermeable coating repels liquid.
• Flexible and durable assembly glove
• Microfoam grip finish
• Double digging provides superior grip in oily and wet
environments
• Super light seamless nylon/ Lycra lining for a closer and
comfortable fitting
• Conforms to EN388 4.1.3.1
• Size 7-11
Product Code: 460295
HAND PROTECTION
EN407 - FLAME RESISTANT
For details, see P106-107
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 117 07/08/18 14:12:55
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Honeywell 2232270 Polytril Black
Foam Nitrile Nylon Gloves
Honeywell 2232273 Polytril Air
Black Foam Nitrile Gloves
Honeywell 2232233 Polytril Mix
Black Rough Nitrile Palm Coated
Polyco Mat-115/16/17 Matrix Fully
Coated Nitrile Gloves
Ansell 11-800 Hyflex Grey Nitrile
Foam Knit Wrist Gloves
Polyco 884 Grip IT Fully Coated
Nitrile Lightweight Gloves
Product Code: 461553 Product Code: 461554 Product Code: 460448
Product Code: 467054 Product Code: 460108 Product Code: 462850
• Foam nitrile coating provides superior grip
& abrasion resistance.
• Ventilated back
• Knitted wrist for a secure fitting and
prevent debris from entering
• 13 gauge
• Conforms to EN388 2003 4.1.2.1 & EN420
• Sizes: 6-11
• Tear resistant
• The nitrile coating and tear resistant
• Elasticated knit wrist
• The seamless breathable liner
• Ideal for precision work
• Excellent grip in dry conditions
• Automotive Maintenance & Repair
• Conforms to EN388 3.1.2.1
• Size 8-11
• Excellent wet grip & dexterity
• Seamless nylon
• Knitted wrist liner
• Foamed grey nitrile coating channels
liquids away
• Near perfect fit to the human hand.
• Conforms to EN388 3.1.3.1
• EN 420:2003 + A1:2009
• Size 6-11
• Seamless breathable knitted nylon
• Lightweight grip coating
• Knitted elasticated wrist
• Exceptional dry grip and good light oil
application grip
• Soft touch seamless knitted yarn
• Excellent dexterity
• Conforms to EN388 4.1.2.1
• Size 7-11
• Seamless knit and elasticated knit wrist
• Lycra® yarn provides excellent dexterity
• Nitrile foam coating and open back
provide superior ventilation of the hand.
• Flexible build for a closer fitting
• Non pilling
• Conforms to EN388 2003 4.1.2.1 & EN420
• Size: 7-10
• Polyamide / cotton mediumweight
knitted
• Nitrile coating on palm with rough finish
• Excellent dexterity
• Ventilated back improves breathability
• Elasticated knitted elasticated wrist
• Oil resistant & soilproof
• Conforms to EN388 4.2.3.2
• Sizes 9-11
NITRILE COATED GLOVES - GENERAL HANDLING
Product Code: 467623
A302 NFCSC Nitrile Fully Coated
Safety Cuff Gloves
• Highly durable heavyweight nitrile glove
• Fully dipped
• Protects against cuts scrapes punctures and tears
• Safety cuff allows for the gloves to be removed instantly with ease
• CE certified & conforms to EN 420, EN 388 4111
• Size: 9 & 10
KeepSafe Heavyweight Nitrile
Fully Coated Gloves
HAND PROTECTION
MASTER FILE IDML 3.indd 118 07/08/18 14:13:00
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Honeywell 2232270 Polytril Black
Foam Nitrile Nylon Gloves
Honeywell 2232273 Polytril Air
Black Foam Nitrile Gloves
Honeywell 2232233 Polytril Mix
Black Rough Nitrile Palm Coated
Polyco Mat-115/16/17 Matrix Fully
Coated Nitrile Gloves
Ansell 11-800 Hyflex Grey Nitrile
Foam Knit Wrist Gloves
Polyco 884 Grip IT Fully Coated
Nitrile Lightweight Gloves
Product Code: 461553 Product Code: 461554 Product Code: 460448
Product Code: 467054 Product Code: 460108 Product Code: 462850
• Foam nitrile coating provides superior grip
& abrasion resistance.
• Ventilated back
• Knitted wrist for a secure fitting and
prevent debris from entering
• 13 gauge
• Conforms to EN388 2003 4.1.2.1 & EN420
• Sizes: 6-11
• Tear resistant
• The nitrile coating and tear resistant
• Elasticated knit wrist
• The seamless breathable liner
• Ideal for precision work
• Excellent grip in dry conditions
• Automotive Maintenance & Repair
• Conforms to EN388 3.1.2.1
• Size 8-11
• Excellent wet grip & dexterity
• Seamless nylon
• Knitted wrist liner
• Foamed grey nitrile coating channels
liquids away
• Near perfect fit to the human hand.
• Conforms to EN388 3.1.3.1
• EN 420:2003 + A1:2009
• Size 6-11
• Seamless breathable knitted nylon
• Lightweight grip coating
• Knitted elasticated wrist
• Exceptional dry grip and good light oil
application grip
• Soft touch seamless knitted yarn
• Excellent dexterity
• Conforms to EN388 4.1.2.1
• Size 7-11
• Seamless knit and elasticated knit wrist
• Lycra® yarn provides excellent dexterity
• Nitrile foam coating and open back
provide superior ventilation of the hand.
• Flexible build for a closer fitting
• Non pilling
• Conforms to EN388 2003 4.1.2.1 & EN420
• Size: 7-10
• Polyamide / cotton mediumweight
knitted
• Nitrile coating on palm with rough finish
• Excellent dexterity
• Ventilated back improves breathability
• Elasticated knitted elasticated wrist
• Oil resistant & soilproof
• Conforms to EN388 4.2.3.2
• Sizes 9-11
NITRILE COATED GLOVES - GENERAL HANDLING
Product Code: 467623
A302 NFCSC Nitrile Fully Coated
Safety Cuff Gloves
• Highly durable heavyweight nitrile glove
• Fully dipped
• Protects against cuts scrapes punctures and tears
• Safety cuff allows for the gloves to be removed instantly with ease
• CE certified & conforms to EN 420, EN 388 4111
• Size: 9 & 10
KeepSafe Heavyweight Nitrile
Fully Coated Gloves
HAND PROTECTION
MASTER FILE IDML 3.indd 118 07/08/18 14:13:00
119
NITRILE COATED GLOVES - GENERAL HANDLING
Product Code: 460110
Product Code: 460935 Product Code: 460938
Ansell Hycron® 27-805 Fully Coated Nitrile Safety Cuff Gloves
KeepSafe Heavyweight
Blue 3/4 Nitrile Gloves
KeepSafe Heavyweight Nitrile
Fully Coated Gloves
• Durable heavy duty glove, three times more durable than
heavy-duty leather
• Offers excellent resistance to sharp and abrasive materials
• More stronger and flexible than PVC
• Grease and oil retardant
• Long lifespan as they do not degrade like leather or cotton
• Silicone free
• Typical applications: metals and motor manufacture
• Conforms to EN388 4.2.2.1.B
• Sizes: 9-11
• Medium weight fully coated
nitrile glove
• Coated on top of a knitted
jersey cotton liner
• Knitted wrist for a more closer
and secure fit
• Actifresh treated to kill bacteria
and to promote freshness
• Typical applications:
Construction, Street Cleaning/
Refuse Collection and the
Fishing Industry
• Conforms to EN388 4.1.4.1
• Sizes: 7-10
• Heavyweight design
• Palm coated in nitrile
• Knitted jersey cotton liner
• Knitted wrist for a secure fit
• Actifresh treated to kill bacteria
and to promote freshness
• Typical applications:
Construction, refuse
collection, oily metal
handling
• Conforms to EN388
4.1.1.1
• Sizes: 9 & 10
119
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 119 07/08/18 14:13:05
NITRILE COATED GLOVES - GENERAL HANDLING
Product Code: 460110
Product Code: 460935 Product Code: 460938
Ansell Hycron® 27-805 Fully Coated Nitrile Safety Cuff Gloves
KeepSafe Heavyweight
Blue 3/4 Nitrile Gloves
KeepSafe Heavyweight Nitrile
Fully Coated Gloves
• Durable heavy duty glove, three times more durable than
heavy-duty leather
• Offers excellent resistance to sharp and abrasive materials
• More stronger and flexible than PVC
• Grease and oil retardant
• Long lifespan as they do not degrade like leather or cotton
• Silicone free
• Typical applications: metals and motor manufacture
• Conforms to EN388 4.2.2.1.B
• Sizes: 9-11
• Medium weight fully coated
nitrile glove
• Coated on top of a knitted
jersey cotton liner
• Knitted wrist for a more closer
and secure fit
• Actifresh treated to kill bacteria
and to promote freshness
• Typical applications:
Construction, Street Cleaning/
Refuse Collection and the
Fishing Industry
• Conforms to EN388 4.1.4.1
• Sizes: 7-10
• Heavyweight design
• Palm coated in nitrile
• Knitted jersey cotton liner
• Knitted wrist for a secure fit
• Actifresh treated to kill bacteria
and to promote freshness
• Typical applications:
Construction, refuse
collection, oily metal
handling
• Conforms to EN388
4.1.1.1
• Sizes: 9 & 10
119
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 119 07/08/18 14:13:05
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
CUT RESISTANT GLOVES - GENERAL HANDLING
Tuff Guyz Taeki Black PU Coated
Cut Level 5 Gloves
Tuff Guyz Taeki Black Nitrile Coated
Cut Level 5 Gloves
Tuff Guyz Taeki Black Latex Coated
Cut Level 5 Gloves
Product Code: 460831
Product Code: 460834
Product Code: 460835
• Black PU coating
• Fantastic dexterity
• Cut level 5 protection
• Superior abrasion resistance
• Machine washable
• Elasticated knitted wrist
• Seamless knitted liner
• Conforms to : EN388 4.5.4.2
• Sizes 7-10
• Black Nitrile coating repels oils and liquids
• Contact heat protection up to 100c
• Excellent grip in oily conditions
• Superior abrasion resistance
• Machine washable
• Elasticated knitted wrist
• Seamless knitted liner
• Conforms to EN 388 4.5.4.2, EN407 X1XXXX
• Size 8-10
• Black latex coating
• Fantastic wet and dry grip
• Superior abrasion and puncture resistance
• Machine washable
• Elasticated knitted wrist & liner
• Conforms to EN 388 3.5.4.3
• Size 8-10
CUT RESISTANT GLOVES - GENERAL HANDLING
HAND PROTECTION
MASTER FILE IDML 3.indd 120 07/08/18 14:13:08
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
CUT RESISTANT GLOVES - GENERAL HANDLING
Tuff Guyz Taeki Black PU Coated
Cut Level 5 Gloves
Tuff Guyz Taeki Black Nitrile Coated
Cut Level 5 Gloves
Tuff Guyz Taeki Black Latex Coated
Cut Level 5 Gloves
Product Code: 460831
Product Code: 460834
Product Code: 460835
• Black PU coating
• Fantastic dexterity
• Cut level 5 protection
• Superior abrasion resistance
• Machine washable
• Elasticated knitted wrist
• Seamless knitted liner
• Conforms to : EN388 4.5.4.2
• Sizes 7-10
• Black Nitrile coating repels oils and liquids
• Contact heat protection up to 100c
• Excellent grip in oily conditions
• Superior abrasion resistance
• Machine washable
• Elasticated knitted wrist
• Seamless knitted liner
• Conforms to EN 388 4.5.4.2, EN407 X1XXXX
• Size 8-10
• Black latex coating
• Fantastic wet and dry grip
• Superior abrasion and puncture resistance
• Machine washable
• Elasticated knitted wrist & liner
• Conforms to EN 388 3.5.4.3
• Size 8-10
CUT RESISTANT GLOVES - GENERAL HANDLING
HAND PROTECTION
MASTER FILE IDML 3.indd 120 07/08/18 14:13:08
• Seamless knit
• Lightweight build
• Cut level 5 technical glove
• ¾ coated for improved coverage
• Micro-porous synthetic coated palm for excellent grip
• Oil and Liquid repellent makes this glove versatile for a range
of applications
• Conforms to EN388 4.5.4.3
• Size: 8-10
• The high density polyurethane coating
• High abrasion resistance
• Elasticated wrist for a closer fit
• Highly dexterous for precise high-risk handling applications
• Typical applications include: automotive, steel, glass and
associated industries
• Conforms to EN388 4.5.4.3
• Size: 6-11
• Provides one of the highest cut, abrasion and tear resistance
standards
• High quality finish and design
• PU coating provides excellent grip and dexterity for precise
handling work
• Grey knitted shell
• Breathable to increase airflow and reduce moisture build-up
• Grey PU Coating
• Conforms to EN388 4.5.4.4
• Size 8-10
• Seamless knitted Aramid yarn
• Treated supple reverse Split-leather palm
• Excellent wet and dry handling
• Highly dexterous for precise handling work types
• High abrasion resistance
• Elasticated knitted wrist for a secure fitting and prevents
debris from entering
• Typical applications include: We/Dry Glass, Automotive,
Presswork, Engineering, Aerospace, Construction
• Conforms to EN388 4.3.4.4
• Sizes: 8-10
Product Code: 461675 Product Code: 464531
Product Code: 464249Product Code: 462799
Tornado OIL5 Oil-Teq5 3/4 Synthetic Micro-Porous
Coated Blue Cut Level 5 Gloves
Tornado TEF5FTR Electroflex FTR Grey PU
Cut Level 5 Gloves
Tornado GRCSP Exertion-Lite SP Leather Palm
Cut Level 3 Gloves
Tornado TAR25 Argent Grey PU Coated
Cut Level 5 Gloves
CUT RESISTANT GLOVES - GENERAL HANDLING
Unique
forefinger
and thumb
reinforcement
extending the
product lifespan
HAND PROTECTION
EN407 - FLAME RESISTANT
For details, see P106-107
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
121
MASTER FILE IDML 3.indd 121 07/08/18 14:13:11
• Lightweight build
• Cut level 5 technical glove
• ¾ coated for improved coverage
• Micro-porous synthetic coated palm for excellent grip
• Oil and Liquid repellent makes this glove versatile for a range
of applications
• Conforms to EN388 4.5.4.3
• Size: 8-10
• The high density polyurethane coating
• High abrasion resistance
• Elasticated wrist for a closer fit
• Highly dexterous for precise high-risk handling applications
• Typical applications include: automotive, steel, glass and
associated industries
• Conforms to EN388 4.5.4.3
• Size: 6-11
• Provides one of the highest cut, abrasion and tear resistance
standards
• High quality finish and design
• PU coating provides excellent grip and dexterity for precise
handling work
• Grey knitted shell
• Breathable to increase airflow and reduce moisture build-up
• Grey PU Coating
• Conforms to EN388 4.5.4.4
• Size 8-10
• Seamless knitted Aramid yarn
• Treated supple reverse Split-leather palm
• Excellent wet and dry handling
• Highly dexterous for precise handling work types
• High abrasion resistance
• Elasticated knitted wrist for a secure fitting and prevents
debris from entering
• Typical applications include: We/Dry Glass, Automotive,
Presswork, Engineering, Aerospace, Construction
• Conforms to EN388 4.3.4.4
• Sizes: 8-10
Product Code: 461675 Product Code: 464531
Product Code: 464249Product Code: 462799
Tornado OIL5 Oil-Teq5 3/4 Synthetic Micro-Porous
Coated Blue Cut Level 5 Gloves
Tornado TEF5FTR Electroflex FTR Grey PU
Cut Level 5 Gloves
Tornado GRCSP Exertion-Lite SP Leather Palm
Cut Level 3 Gloves
Tornado TAR25 Argent Grey PU Coated
Cut Level 5 Gloves
CUT RESISTANT GLOVES - GENERAL HANDLING
Unique
forefinger
and thumb
reinforcement
extending the
product lifespan
HAND PROTECTION
EN407 - FLAME RESISTANT
For details, see P106-107
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
121
MASTER FILE IDML 3.indd 121 07/08/18 14:13:11
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
TAKE YOUR
CUT PROTECTION TO
ANOTHER LEVEL
GLOVES SERIES
SHOWA S-TEX 581 is a comfortable,
lightweight glove that combines premium
cut resistant fibres with exceptional grip.
CUT
PROTECTION
LEVEL 5 (EN 388)
LEVEL E (ISO 13997)
TAKE HAND PROTECTION
TO THE NEXT LEVEL
new
Features
- Excellent cut resistance due to SHOWA’s engineered fibres
- Embossed nitrile palm finish disperses oil away to increase
grip longevity in light oily environments
- Foam nitrile coating provides an abrasion resistance level 4
and extended usage
- Microporous nitrile coating grants exceptional grip while
allowing warm air and moisture from inside to escape, thus
keeping hands dry
- Sizes: S-XL
[
13-gauge engineered Hagane Coil® liner with Kevlar®]
hagane coil
®
technology liner
industries
A unique coiling technique binds an attending yarn to a stainless stell core to provide better cut protection than
when using natural or synthetic fibres. Yet, it is still thin enough to allow flexibility and freedom of movement as
the hand bends and flexes to result in a comfortable and confident wearing experience.
- Press handling
- Handling sharp-edged objects
- Glass and metal sheets handling
- Assembling metal parts and
components
- General maintenance
- Metal fabrication
- Handling building materials
steel fixing & internal fixing
Product code: 468297
CUT RESISTANT GLOVES - GENERAL HANDLING
MASTER FILE IDML 3.indd 122 07/08/18 14:13:16
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
TAKE YOUR
CUT PROTECTION TO
ANOTHER LEVEL
GLOVES SERIES
SHOWA S-TEX 581 is a comfortable,
lightweight glove that combines premium
cut resistant fibres with exceptional grip.
CUT
PROTECTION
LEVEL 5 (EN 388)
LEVEL E (ISO 13997)
TAKE HAND PROTECTION
TO THE NEXT LEVEL
new
Features
- Excellent cut resistance due to SHOWA’s engineered fibres
- Embossed nitrile palm finish disperses oil away to increase
grip longevity in light oily environments
- Foam nitrile coating provides an abrasion resistance level 4
and extended usage
- Microporous nitrile coating grants exceptional grip while
allowing warm air and moisture from inside to escape, thus
keeping hands dry
- Sizes: S-XL
[
13-gauge engineered Hagane Coil® liner with Kevlar®]
hagane coil
®
technology liner
industries
A unique coiling technique binds an attending yarn to a stainless stell core to provide better cut protection than
when using natural or synthetic fibres. Yet, it is still thin enough to allow flexibility and freedom of movement as
the hand bends and flexes to result in a comfortable and confident wearing experience.
- Press handling
- Handling sharp-edged objects
- Glass and metal sheets handling
- Assembling metal parts and
components
- General maintenance
- Metal fabrication
- Handling building materials
steel fixing & internal fixing
Product code: 468297
CUT RESISTANT GLOVES - GENERAL HANDLING
MASTER FILE IDML 3.indd 122 07/08/18 14:13:16
123
TAKE YOUR
CUT PROTECTION TO
ANOTHER LEVEL
GLOVES SERIES
SHOWA S-TEX 581 is a comfortable,
lightweight glove that combines premium
cut resistant fibres with exceptional grip.
CUT
PROTECTION
LEVEL 5 (EN 388)
LEVEL E (ISO 13997)
Features
hagane coil
®
technology liner
industries
Product code: 468297
• Coated palm
• Elasticated cuff
• Standard finish
• Without special treatment
• High Performance
Polyethylene (HPPE)
Product Code: 460408
Showa 541 Black PU Coated Cut Level 3 Gloves
CUT RESISTANT GLOVES - GENERAL HANDLING
• Cut Level 4 - EN388: 2003 4.4.4.1
• ISO 13997: Level D
• ¾ coated nitrile with an additional
coating of foam nitrile on the palm
and fingertips
• Seamless 13 gauge Hagane Coil®
knitted liner
• Ideal for the secure handling of
oily components and materials
that present a high degree of
mechanical risk
• Sizes: S-2XL
showa s-tex
376
code: 468481
• Anatomical shape
• Seamless knit
• Sizes: 6-10
• Conforms to EN388 4.3.4.2
The versatility and strength of these gloves make them
ideal for numerous industries including:
•Aerospace
•Automotive
•Manufacturing
•Municipal services
•Steel & metals
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 123 07/08/18 14:13:18
TAKE YOUR
CUT PROTECTION TO
ANOTHER LEVEL
GLOVES SERIES
SHOWA S-TEX 581 is a comfortable,
lightweight glove that combines premium
cut resistant fibres with exceptional grip.
CUT
PROTECTION
LEVEL 5 (EN 388)
LEVEL E (ISO 13997)
Features
hagane coil
®
technology liner
industries
Product code: 468297
• Coated palm
• Elasticated cuff
• Standard finish
• Without special treatment
• High Performance
Polyethylene (HPPE)
Product Code: 460408
Showa 541 Black PU Coated Cut Level 3 Gloves
CUT RESISTANT GLOVES - GENERAL HANDLING
• Cut Level 4 - EN388: 2003 4.4.4.1
• ISO 13997: Level D
• ¾ coated nitrile with an additional
coating of foam nitrile on the palm
and fingertips
• Seamless 13 gauge Hagane Coil®
knitted liner
• Ideal for the secure handling of
oily components and materials
that present a high degree of
mechanical risk
• Sizes: S-2XL
showa s-tex
376
code: 468481
• Anatomical shape
• Seamless knit
• Sizes: 6-10
• Conforms to EN388 4.3.4.2
The versatility and strength of these gloves make them
ideal for numerous industries including:
•Aerospace
•Automotive
•Manufacturing
•Municipal services
•Steel & metals
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 123 07/08/18 14:13:18
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
UVEX 60499 C500 HPE Coated Dry
Cut Level 5 Protection Glove
TEGERA® 8808 Infinity Cut Level 5
Nitrile Foam 3/4 Coated Gloves
UVEX 60492 C500 HPE Coated Wet
Lime/Anthracite Cut Level 5 Glove
Ejendals 783 TEGERA® Cut Level 3
Nitrile Full Dip Glove
UVEX 60600 C500 HPE Coated XG
Cut Level 5 Gloves
UVEX 60080 Phynomic C3 Cut Level 3 Glove
Ejendals 907 TEGERA® Cut Level 5
Dotted Grip Gloves
Product Code: 467820
Product Code: 467824
Product Code: 467901
Product Code: 467564
Product Code: 467900
Product Code: 467821
Product Code: 467847
• Cut level 5 glove with HPV grip nubs for
secure grip & Optimum dexterity
• Uvex climazone® helps reduce sweating
for increased comfort
• Certified to Okeo-Tex® 100 standard - no
harmful chemicals
• Excels in dry working conditions
• EN388 2.5.4.X, EN388:2016 XX4XC
• Sizes: 7-11
• HPE coating for dry or damp conditions
• Optimum dexterity with soft, silky feel.
Temperature regulating
• uvex climazone® helps reduce sweating
for increased comfort
• Certified to Okeo-Tex® 100 standard - no
harmful chemicals
• Silicon-free according to imprint test
• EN388 4542 , EN388:2016 4X42C
• Sizes: 7-11
• Cut level 5 glove with XtraGrip – best oil
grip in class!
• High-Performance Elastomer (HPE) coating
• Ultra slow liquid breakthrough provides
additional skin protection
• Suitable for wet areas and oily working
conditions where exceptional grip counts
• Certified to Okeo-Tex® 100 standard
• EN388 4542, EN388:2016 4X42C
• Sizes: 7-11
• Second skin fit gives a natural touch
• Cut level 3 protection (level 3/5)
• Unrivalled grip in dry/slightly damp environments
• Flexible construction with soft breathable liner
• Dermatologically tested and approved
• Accelerator free and suitable for allergy sufferers
• Food sector approved - leaves no trace marks on products
• Conforms to EN388 4343, EN388:2016 4X43B
• Sizes: 6-11
• Nitrile foam/water-based PU gloves
• 3/4 dipped & double dipped coating
• Glass fibre thread, Nylon, Spandex, 15gg
• Foam grip textured pattern
• Withstands contact heat up to 100°C
• Oil and grease resistant, for assembly work
• Conforms to Cat. II design, EN 407,
X1XXXX, EN 388:2003, 4543
• Sizes: 7-11
• 13 gauge Dyneema/Lycra/Nylon blend
• Full Nitrile coating for all-round protection
• Knitted wrist for a secure fit and to protect
against dust and debris
• Textured grip coating
• Steel and fibre glass free
• Oil and grease resistant
• Conforms to EN388 4343. CAT II
• Size: 7-11
• Cut resistant glove
• Glass fibre thread, polyester, 13 gg
• Elasticated build for a close fit
• Dotted grip & latex free
• Cut resistance level 5
• Green high-vis colouring
• For all-round work
• Conforms to EN388: 2003 4.5.4.X, Cat. II
• Sizes: 6-11
CUT RESISTANT GLOVES - GENERAL HANDLING CUT RESISTANT GLOVES / SLEEVES - GENERAL HANDLING
HAND PROTECTION
MASTER FILE IDML 3.indd 124 07/08/18 14:13:23
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
UVEX 60499 C500 HPE Coated Dry
Cut Level 5 Protection Glove
TEGERA® 8808 Infinity Cut Level 5
Nitrile Foam 3/4 Coated Gloves
UVEX 60492 C500 HPE Coated Wet
Lime/Anthracite Cut Level 5 Glove
Ejendals 783 TEGERA® Cut Level 3
Nitrile Full Dip Glove
UVEX 60600 C500 HPE Coated XG
Cut Level 5 Gloves
UVEX 60080 Phynomic C3 Cut Level 3 Glove
Ejendals 907 TEGERA® Cut Level 5
Dotted Grip Gloves
Product Code: 467820
Product Code: 467824
Product Code: 467901
Product Code: 467564
Product Code: 467900
Product Code: 467821
Product Code: 467847
• Cut level 5 glove with HPV grip nubs for
secure grip & Optimum dexterity
• Uvex climazone® helps reduce sweating
for increased comfort
• Certified to Okeo-Tex® 100 standard - no
harmful chemicals
• Excels in dry working conditions
• EN388 2.5.4.X, EN388:2016 XX4XC
• Sizes: 7-11
• HPE coating for dry or damp conditions
• Optimum dexterity with soft, silky feel.
Temperature regulating
• uvex climazone® helps reduce sweating
for increased comfort
• Certified to Okeo-Tex® 100 standard - no
harmful chemicals
• Silicon-free according to imprint test
• EN388 4542 , EN388:2016 4X42C
• Sizes: 7-11
• Cut level 5 glove with XtraGrip – best oil
grip in class!
• High-Performance Elastomer (HPE) coating
• Ultra slow liquid breakthrough provides
additional skin protection
• Suitable for wet areas and oily working
conditions where exceptional grip counts
• Certified to Okeo-Tex® 100 standard
• EN388 4542, EN388:2016 4X42C
• Sizes: 7-11
• Second skin fit gives a natural touch
• Cut level 3 protection (level 3/5)
• Unrivalled grip in dry/slightly damp environments
• Flexible construction with soft breathable liner
• Dermatologically tested and approved
• Accelerator free and suitable for allergy sufferers
• Food sector approved - leaves no trace marks on products
• Conforms to EN388 4343, EN388:2016 4X43B
• Sizes: 6-11
• Nitrile foam/water-based PU gloves
• 3/4 dipped & double dipped coating
• Glass fibre thread, Nylon, Spandex, 15gg
• Foam grip textured pattern
• Withstands contact heat up to 100°C
• Oil and grease resistant, for assembly work
• Conforms to Cat. II design, EN 407,
X1XXXX, EN 388:2003, 4543
• Sizes: 7-11
• 13 gauge Dyneema/Lycra/Nylon blend
• Full Nitrile coating for all-round protection
• Knitted wrist for a secure fit and to protect
against dust and debris
• Textured grip coating
• Steel and fibre glass free
• Oil and grease resistant
• Conforms to EN388 4343. CAT II
• Size: 7-11
• Cut resistant glove
• Glass fibre thread, polyester, 13 gg
• Elasticated build for a close fit
• Dotted grip & latex free
• Cut resistance level 5
• Green high-vis colouring
• For all-round work
• Conforms to EN388: 2003 4.5.4.X, Cat. II
• Sizes: 6-11
CUT RESISTANT GLOVES - GENERAL HANDLING CUT RESISTANT GLOVES / SLEEVES - GENERAL HANDLING
HAND PROTECTION
MASTER FILE IDML 3.indd 124 07/08/18 14:13:23
125
• Contact heat up to 100c
• Tubular sleeve for arm & wrist protection
• Cut level 5 protection
• Excellent abrasion resistance
• Machine washable
• Thumb slot ensures that the sleeve
will not slip exposing the wrist or arm
• Soft finish
• Conforms to EN388 4.5.4.X, EN407
X1XXXX
• Length: 14”
• Contact heat up to 100c
• Tubular sleeve for arm and wrist protection
• Cut level 5 protection
• Velcro adjustable closure at the top
• Excellent abrasion resistance
• Machine washable
• Thumb slot ensures that the sleeve will not
slip exposing the wrist or arm
• Soft finish
• Conforms to EN388 4.5.4.X, EN407 X1XXXX
• Length: 22”
• Elasticated wrist for a better fitting and stops
debris from entering
• Excellent breathability
• uvex climazone® helps reduce sweating for
increased comfort
• Certified to Okeo-Tex® 100 standard - no
harmful chemicals in making these gloves
• Excels in dry environments
• Conforms to EN388 2.5.4.X. EN388:2016
2X4XC
• Size: large.
• Length 40 cm
• High cut-resistant liner
• Nitrile palm coating offering good grip
especially in wet and
oily environments
• Open-back design to increase
breathability
• Close fitting for maximum dexterity
• Elasticated knit wrist for a secure fit
• Conforms to EN 388 4.5.4.4
• Size 7-11
• High cut-resistant liner
• PU palm coating offering good grip
and performance
• Open-back design to increase
breathability
• Close fitting for maximum dexterity
• Elasticated knit wrist for a secure fit
• Conforms to EN 388 4.5.4.4
• Size 7-11
• Para-aramid fibres in the knit of the
sleeve provide cut level 3 resistance
• Thumbhole prevents slipping and wrist
exposure
• Gives increased protection from cuts,
slash, tear and certain puncture
• Machine washable
• Heat resistant
• Sizes: 18”
• Also available in 10” & 14”
• EN388:2003 1.3.3.4
Product Code: 460830
Product Code: 467755Product Code: 460414
Product Code: 460833 Product Code: 467565
Product Code: 467756
Tuff Guyz 14” Taeki
Cut Resistant Sleeves (LEVEL 5)
KeepSafe PRO PU Palm Coated
Cut Level 5 Gloves
Showa Skytec Nevada 18”
Yellow Cut Level 3 Sleeve
Tuff Guyz 22” Taeki
Cut Resistant Sleeves (LEVEL 5)
Uvex 60491 C500 Green Cut Level
5 Sleeve (Large) (1 sleeve)
KeepSafe PRO Nitrile Palm Coated
Cut Level 5 Gloves
CUT RESISTANT GLOVES / SLEEVES - GENERAL HANDLING
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 125 07/08/18 14:13:27
• Contact heat up to 100c
• Tubular sleeve for arm & wrist protection
• Cut level 5 protection
• Excellent abrasion resistance
• Machine washable
• Thumb slot ensures that the sleeve
will not slip exposing the wrist or arm
• Soft finish
• Conforms to EN388 4.5.4.X, EN407
X1XXXX
• Length: 14”
• Contact heat up to 100c
• Tubular sleeve for arm and wrist protection
• Cut level 5 protection
• Velcro adjustable closure at the top
• Excellent abrasion resistance
• Machine washable
• Thumb slot ensures that the sleeve will not
slip exposing the wrist or arm
• Soft finish
• Conforms to EN388 4.5.4.X, EN407 X1XXXX
• Length: 22”
• Elasticated wrist for a better fitting and stops
debris from entering
• Excellent breathability
• uvex climazone® helps reduce sweating for
increased comfort
• Certified to Okeo-Tex® 100 standard - no
harmful chemicals in making these gloves
• Excels in dry environments
• Conforms to EN388 2.5.4.X. EN388:2016
2X4XC
• Size: large.
• Length 40 cm
• High cut-resistant liner
• Nitrile palm coating offering good grip
especially in wet and
oily environments
• Open-back design to increase
breathability
• Close fitting for maximum dexterity
• Elasticated knit wrist for a secure fit
• Conforms to EN 388 4.5.4.4
• Size 7-11
• High cut-resistant liner
• PU palm coating offering good grip
and performance
• Open-back design to increase
breathability
• Close fitting for maximum dexterity
• Elasticated knit wrist for a secure fit
• Conforms to EN 388 4.5.4.4
• Size 7-11
• Para-aramid fibres in the knit of the
sleeve provide cut level 3 resistance
• Thumbhole prevents slipping and wrist
exposure
• Gives increased protection from cuts,
slash, tear and certain puncture
• Machine washable
• Heat resistant
• Sizes: 18”
• Also available in 10” & 14”
• EN388:2003 1.3.3.4
Product Code: 460830
Product Code: 467755Product Code: 460414
Product Code: 460833 Product Code: 467565
Product Code: 467756
Tuff Guyz 14” Taeki
Cut Resistant Sleeves (LEVEL 5)
KeepSafe PRO PU Palm Coated
Cut Level 5 Gloves
Showa Skytec Nevada 18”
Yellow Cut Level 3 Sleeve
Tuff Guyz 22” Taeki
Cut Resistant Sleeves (LEVEL 5)
Uvex 60491 C500 Green Cut Level
5 Sleeve (Large) (1 sleeve)
KeepSafe PRO Nitrile Palm Coated
Cut Level 5 Gloves
CUT RESISTANT GLOVES / SLEEVES - GENERAL HANDLING
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 125 07/08/18 14:13:27
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
MECHANICAL HAZARD
Product Code: Size 8 - 463649
Product Code: Size 9 - 463516
Product Code: Size 10 - 463384
Product Code: 460510
Product Code: Size 7 - 461287
Product Code: Size 8 - 461288
Product Code: 467566
Product Code: 464233
Polyco 8602/3/4 T Reflex Orange
Palm Coated Latex Gloves
Polyco 7650/1 Inspec Tec
White Nylon Inspection Gloves
Polyco MAT-M3 Matrix Black/Grey
3 Digit Mechanics Glove
Honeywell 2094145 Green 3/4
Coated Latex Knitwrist Gloves
Ejendals Tegera 114 Leather Unlined Glove
• Ideal for general handling
• Made from seamless knitted polycotton
• Crinkle latex palm coating
• Excellent grip in both wet and dry
conditions
• Breathable to prevent heat build-up
• Elasticated knit wrist prevents debris from
entering
• Typical application include: Engineering
work, site cleaning & bricklaying
• Sizes: 8-10
• Conforms to EN 388 3.1.4.2
• Natural latex ¾ coated glove
• Cotton jersey base
• Crinkled finishing for added grip
• Knitted wrist for stopping debris from entering and added fitting
• The cotton absorbs perspiration thus provides greater comfort.
• The ventilated back improves the glove’s breathability.
• The glove’s crinkled latex coating provides resistance to
abrasion and perforation
• Excellent dexterity
• It also offers good abrasion and tear resistance
• Its crepe finish helps the user to grasp slippery parts.
• Size: 8-10
• Conforms to EN 388-2.0.0.3
• Durable glove design and comfortable for long periods of use
• Soft full-grain goatskin on the palm
• High grade grey nylon back
• Elastic seam over the wrist for better fit
• Breathable back for added comfort and moisture reduction
• Suitable for delicate assembly work, handicrafts, workshop, etc.
• Sizes: 5-11
• BS EN388 2.0.0.1. CAT II design
• Made with seamless knitted stretch
nylon inspection glove.
• The white knitted stretch nylon shell
provides a close fit with
excellent dexterity
• Breathable for added comfort and a
reduction in moisture build-up
• Knit wrist for a closer fitting which
prevents debris from entering
• Typical applications: mechanical and
engineering work
• Conforms to EN388 1.1.4.X
• Sizes: 7 & 8
• Made from flexible high grade materials
• Close fitting
• Reinforced in key areas giving the user
additional protection
• Three open fingers for excellent dexterity
• Features a synthetic leather palm and
reinforced palm grip patches
• Neoprene® on the knuckles for extra
protection.
• Reinforced liner
• The glove also has an adjustable
VELCRO® wrist strap for a secure fit
• Size: 7-11
• Conforms to EN388 2.1.2.1
Product Code: 460868
HAND PROTECTION
MASTER FILE IDML 3.indd 126 07/08/18 14:13:35
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
MECHANICAL HAZARD
Product Code: Size 8 - 463649
Product Code: Size 9 - 463516
Product Code: Size 10 - 463384
Product Code: 460510
Product Code: Size 7 - 461287
Product Code: Size 8 - 461288
Product Code: 467566
Product Code: 464233
Polyco 8602/3/4 T Reflex Orange
Palm Coated Latex Gloves
Polyco 7650/1 Inspec Tec
White Nylon Inspection Gloves
Polyco MAT-M3 Matrix Black/Grey
3 Digit Mechanics Glove
Honeywell 2094145 Green 3/4
Coated Latex Knitwrist Gloves
Ejendals Tegera 114 Leather Unlined Glove
• Ideal for general handling
• Made from seamless knitted polycotton
• Crinkle latex palm coating
• Excellent grip in both wet and dry
conditions
• Breathable to prevent heat build-up
• Elasticated knit wrist prevents debris from
entering
• Typical application include: Engineering
work, site cleaning & bricklaying
• Sizes: 8-10
• Conforms to EN 388 3.1.4.2
• Natural latex ¾ coated glove
• Cotton jersey base
• Crinkled finishing for added grip
• Knitted wrist for stopping debris from entering and added fitting
• The cotton absorbs perspiration thus provides greater comfort.
• The ventilated back improves the glove’s breathability.
• The glove’s crinkled latex coating provides resistance to
abrasion and perforation
• Excellent dexterity
• It also offers good abrasion and tear resistance
• Its crepe finish helps the user to grasp slippery parts.
• Size: 8-10
• Conforms to EN 388-2.0.0.3
• Durable glove design and comfortable for long periods of use
• Soft full-grain goatskin on the palm
• High grade grey nylon back
• Elastic seam over the wrist for better fit
• Breathable back for added comfort and moisture reduction
• Suitable for delicate assembly work, handicrafts, workshop, etc.
• Sizes: 5-11
• BS EN388 2.0.0.1. CAT II design
• Made with seamless knitted stretch
nylon inspection glove.
• The white knitted stretch nylon shell
provides a close fit with
excellent dexterity
• Breathable for added comfort and a
reduction in moisture build-up
• Knit wrist for a closer fitting which
prevents debris from entering
• Typical applications: mechanical and
engineering work
• Conforms to EN388 1.1.4.X
• Sizes: 7 & 8
• Made from flexible high grade materials
• Close fitting
• Reinforced in key areas giving the user
additional protection
• Three open fingers for excellent dexterity
• Features a synthetic leather palm and
reinforced palm grip patches
• Neoprene® on the knuckles for extra
protection.
• Reinforced liner
• The glove also has an adjustable
VELCRO® wrist strap for a secure fit
• Size: 7-11
• Conforms to EN388 2.1.2.1
Product Code: 460868
HAND PROTECTION
MASTER FILE IDML 3.indd 126 07/08/18 14:13:35
127
MECHANICAL HAZARD - RIGGER GLOVES
Product Code: 467566
Ejendals Tegera 114 Leather Unlined Glove
Product Code: 460864
Product Code: 460868 Product Code: 460866
Product Code: 460865
KeepSafe Grey
Canadian Style Standard Riggers
KeepSafe Yellow Cowhide Heavyweight Riggers
Keepsafe Yellow/Black Premium
Furniture Hide Riggers
KeepSafe Heavyweight
Grey Leather Red/Back Riggers
• Standard grey split leather
• Leather knuckle strap
• Supple leather
• Stiffened safety cuff
• Striped cotton back
• Size: One Size
• For minimal risks only
• Superior quality black furniture hide
• Leather patch palm glove
• Knuckle strap and fingertips
• Heavyweight yellow cotton drill back
• Elasticated rubberised cuff
• Typical applications: Local authorities,
construction, light general handling &
maintenance work.
• Size 10.
• Conforms to EN388 2.1.2.1
• Premier quality chrome split leather
• Cotton back
• Knuckle and fingertip
protection
• Rubberised safety cuff
• Palm lined
• Size: One size
• Conforms to EN 388 4.1.4.3 Intermediate Design
• High quality leather cowhide
• Leather knuckle strap
• Heavyweight yellow back
• Rubberised safety cuff
• Smooth soft durable leather
• Hard-wearing & durable design
• Sizes: One Size
• Conforms to EN388 4.1.4.3
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
HAND PROTECTION
MASTER FILE IDML 3.indd 127 07/08/18 14:13:49
MECHANICAL HAZARD - RIGGER GLOVES
Product Code: 467566
Ejendals Tegera 114 Leather Unlined Glove
Product Code: 460864
Product Code: 460868 Product Code: 460866
Product Code: 460865
KeepSafe Grey
Canadian Style Standard Riggers
KeepSafe Yellow Cowhide Heavyweight Riggers
Keepsafe Yellow/Black Premium
Furniture Hide Riggers
KeepSafe Heavyweight
Grey Leather Red/Back Riggers
• Standard grey split leather
• Leather knuckle strap
• Supple leather
• Stiffened safety cuff
• Striped cotton back
• Size: One Size
• For minimal risks only
• Superior quality black furniture hide
• Leather patch palm glove
• Knuckle strap and fingertips
• Heavyweight yellow cotton drill back
• Elasticated rubberised cuff
• Typical applications: Local authorities,
construction, light general handling &
maintenance work.
• Size 10.
• Conforms to EN388 2.1.2.1
• Premier quality chrome split leather
• Cotton back
• Knuckle and fingertip
protection
• Rubberised safety cuff
• Palm lined
• Size: One size
• Conforms to EN 388 4.1.4.3 Intermediate Design
• High quality leather cowhide
• Leather knuckle strap
• Heavyweight yellow back
• Rubberised safety cuff
• Smooth soft durable leather
• Hard-wearing & durable design
• Sizes: One Size
• Conforms to EN388 4.1.4.3
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
HAND PROTECTION
MASTER FILE IDML 3.indd 127 07/08/18 14:13:49
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
MECHANICAL HAZARD - PU COATED GLOVES
KeepSafe Black PU Coated
Polyester Lightweight Gloves
Value Grey PU Coated
Lightweight Polyester Gloves
Black PU Coated Lightweight Nylon Gloves
Product Code: 460852 Product Code: 461781
Product Code: 460856
• PU coating
• Seamless polyester liner
• Incredible tactile touch
• Fantastic dexterity and comfort
• Supple and stretchable
• Elasticated knitted wrist for a closer fit
• Lightweight
• Available in grey or black
• Sizes: 7-11
• Conforms to EN388 4.1.3.1
• PU coated
• Excellent dexterity for
precise handling work
• Breathable and
comfortable
• Flexible and sensitive
• Typical applications:
component handling,
general assembly,
electronics and general
handling
• Conforms to EN388 4.1.2.1
• Sizes: 6-11
• Black PU coated palm glove
• Made with black seamless knitted nylon liner
• Incredible tactile touch
• Fantastic dexterity and comfort
• Supple and stretchable for a closer fitting
• Elasticated knitted wrist to prevent debris from entering
• Near weightless feeling due to the lightweight materials
used.
• Breathable back for added ventilation and reduction in
heat/moisture build-up
• Size: 6-11
• Conforms to EN388 3.1.3.1.X
Product Code: 467823
UVEX 60050 Phynomic Foam - Dry Use
Grey/White Gloves
HAND PROTECTION
MASTER FILE IDML 3.indd 128 07/08/18 14:13:54
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
MECHANICAL HAZARD - PU COATED GLOVES
KeepSafe Black PU Coated
Polyester Lightweight Gloves
Value Grey PU Coated
Lightweight Polyester Gloves
Black PU Coated Lightweight Nylon Gloves
Product Code: 460852 Product Code: 461781
Product Code: 460856
• PU coating
• Seamless polyester liner
• Incredible tactile touch
• Fantastic dexterity and comfort
• Supple and stretchable
• Elasticated knitted wrist for a closer fit
• Lightweight
• Available in grey or black
• Sizes: 7-11
• Conforms to EN388 4.1.3.1
• PU coated
• Excellent dexterity for
precise handling work
• Breathable and
comfortable
• Flexible and sensitive
• Typical applications:
component handling,
general assembly,
electronics and general
handling
• Conforms to EN388 4.1.2.1
• Sizes: 6-11
• Black PU coated palm glove
• Made with black seamless knitted nylon liner
• Incredible tactile touch
• Fantastic dexterity and comfort
• Supple and stretchable for a closer fitting
• Elasticated knitted wrist to prevent debris from entering
• Near weightless feeling due to the lightweight materials
used.
• Breathable back for added ventilation and reduction in
heat/moisture build-up
• Size: 6-11
• Conforms to EN388 3.1.3.1.X
Product Code: 467823
UVEX 60050 Phynomic Foam - Dry Use
Grey/White Gloves
HAND PROTECTION
MASTER FILE IDML 3.indd 128 07/08/18 14:13:54
129
MECHANICAL HAZARD - PU COATED GLOVES
Product Code: 461781
Product Code: 467822
Product Code: 462475
• Intended design to enable one or more digits to detach / tear
should fingers become trapped in machinery
• Product features a perforated seam near digit base to detach
• Second skin fit gives a natural touch
• Flexible construction reduces fatigue
• Dermatologically tested and approved
• Free from allergenic substances - no harmful substances
• Suitable for the most allergy sensitive wearers
• Certified to Oeko-Tex Standard 100
• Excellent levels of dexterity and grip
• High levels of breathability
• Excels in dry and damp/oily working conditions
• Conforms to EN388 3.1.X.1
• Sizes: 6-12
• The phynomic wet coating allows liquids to run off while light oil
is absorbed
• High levels of grip in moderate wet and light oil applications
• Robust glove with excellent abrasion resistance
• Soft breathable liner
• Second skin fit gives a natural touch
• Flexible construction reduces fatigue
• High levels of dexterity
• Dermatologically tested and approved
• Free from allergenic substances
• Suitable for the most allergy sensitive wearers
• Certified to Oeko-Tex Standard 100
• Conforms to EN388 4.1.3.1
• Sizes 6-12
UVEX 60060 Phynomic Wet Black/Blue
Gloves
UVEX 60054 Phynomic X-Foam HV Safety Gloves
Product Code: 467823
• Water repellent – outstanding grip in dry applications
• Second skin fit gives a natural touch
• Flexible construction reduces fatigue
• Soft breathable liner
• High levels of dexterity
• Certificated for the food industry
• Leaves no trace marks on products
• Dermatologically tested and approved
• Free from allergenic substances
• Suitable for the most allergy sensitive wearers
• Certified to Oeko-Tex Standard 100
• Conforms to EN388 3.1.3.1
• Sizes: 5-12
UVEX 60050 Phynomic Foam - Dry Use
Grey/White Gloves
Easy-Tear feature
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
HAND PROTECTION
MASTER FILE IDML 3.indd 129 07/08/18 14:13:57
MECHANICAL HAZARD - PU COATED GLOVES
Product Code: 461781
Product Code: 467822
Product Code: 462475
• Intended design to enable one or more digits to detach / tear
should fingers become trapped in machinery
• Product features a perforated seam near digit base to detach
• Second skin fit gives a natural touch
• Flexible construction reduces fatigue
• Dermatologically tested and approved
• Free from allergenic substances - no harmful substances
• Suitable for the most allergy sensitive wearers
• Certified to Oeko-Tex Standard 100
• Excellent levels of dexterity and grip
• High levels of breathability
• Excels in dry and damp/oily working conditions
• Conforms to EN388 3.1.X.1
• Sizes: 6-12
• The phynomic wet coating allows liquids to run off while light oil
is absorbed
• High levels of grip in moderate wet and light oil applications
• Robust glove with excellent abrasion resistance
• Soft breathable liner
• Second skin fit gives a natural touch
• Flexible construction reduces fatigue
• High levels of dexterity
• Dermatologically tested and approved
• Free from allergenic substances
• Suitable for the most allergy sensitive wearers
• Certified to Oeko-Tex Standard 100
• Conforms to EN388 4.1.3.1
• Sizes 6-12
UVEX 60060 Phynomic Wet Black/Blue
Gloves
UVEX 60054 Phynomic X-Foam HV Safety Gloves
Product Code: 467823
• Water repellent – outstanding grip in dry applications
• Second skin fit gives a natural touch
• Flexible construction reduces fatigue
• Soft breathable liner
• High levels of dexterity
• Certificated for the food industry
• Leaves no trace marks on products
• Dermatologically tested and approved
• Free from allergenic substances
• Suitable for the most allergy sensitive wearers
• Certified to Oeko-Tex Standard 100
• Conforms to EN388 3.1.3.1
• Sizes: 5-12
UVEX 60050 Phynomic Foam - Dry Use
Grey/White Gloves
Easy-Tear feature
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
HAND PROTECTION
MASTER FILE IDML 3.indd 129 07/08/18 14:13:57
Polyco Green Nitritech III 13” Nitrile Gauntlets
colour
CUT LEVEL 1
CUT LEVEL 1
CUT LEVEL 3
CUT LEVEL 5
CUT LEVEL 3 CUT LEVEL 5
NUISANCE CUT HAZARDS MODERATE CUT HAZARDS EXTREME CUT HAZARDS
• Automotive
• Parts assembly
• Light metal stamping
• Light duty glass handling
• Heavy metal stamping
• Plate glass handling
PU Coated
Cut Level 1 Gloves
Nitrile Coated
Cut Level 1 Gloves
Latex Coated
Cut Level 1 Gloves
KeepSafe Pro Nitrile Coated
Cut Level 3 Gloves
KeepSafe Pro PU Coated
Cut Level 3 Gloves
Latex Coated
Cut Level 5 Gloves
Nitrile Foam Coated
Cut Level 5 Gloves
PU Coated Cut Level 5
Gloves
Product Code: 466974
Product Code: 466978
Product Code: 461883
Product Code: 466977 Product Code: 466976
Product Code: 461881
Product Code: 466973Product Code: 466972
• Ideal for intricate handling
• Good grip in dry environments
• Comfortable & high abrasion resistance
• Seamless knitted red nylon liner
• Conforms to EN388 4.1.3.1
• Sizes: 8-10
• Ideal for heavier duty handling
in light engineering and
assembly applications
• Polyurethane coating to palm
and fingers for grip
• High abrasion resistance
• Seamless knitted orange liner
• Elasticated knit wrist for a closer
fitting
• Conforms to EN388 4.3.4.2
• Sizes: 8-10
• Black Latex coating
• Breathable open back
• Excellent wet and dry grip
• Excellent abrasion resistance
• Green stretchable liner
• Conforms to EN388 3.5.4.2
• Sizes: 8-10
• Black breathable nitrile foam coating
• Breathable open back
• Excellent grip in oily and greasy
environments
• Excellent abrasion resistance
• Conforms to EN388 4.5.4.3
• Sizes: 8-10
• Black PU coating
• Breathable open back
• Precision anti-slip grip
• Excellent abrasion resistance
• Green stretchable liner
• Conforms to EN388 4.5.4.3
• Sizes: 8-10
• Ideal for work in damp or
greasy environments
• Nitrile foam coating
ensures excellent grip and
performance
• Dexterous and flexible for
secure handling
• Open back ensure breathability
for added comfort
• Seamless knitted orange liner
• Conforms to EN388 4.3.4.3
• Sizes: 8-10
• Ideal for wet, dry and oily conditions
• Seamless knitted red nylon liner
• Nitrile coating is robust and yet tactile
• Knitted wrist for secure fit
• Conforms to EN388 4.1.3.2
• Sizes: 8-10
• Black Latex coating & breathable back
• Excellent wet and dry grip
• Lightweight design
• Red nylon stretchable liner
• Conforms to EN388 4.1.4.3
• Sizes: 8-10
RED ORANGE GREEN| |
glovescoded
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
HAND PROTECTION
MASTER FILE IDML 3.indd 130 07/08/18 14:14:12
colour
CUT LEVEL 1
CUT LEVEL 1
CUT LEVEL 3
CUT LEVEL 5
CUT LEVEL 3 CUT LEVEL 5
NUISANCE CUT HAZARDS MODERATE CUT HAZARDS EXTREME CUT HAZARDS
• Automotive
• Parts assembly
• Light metal stamping
• Light duty glass handling
• Heavy metal stamping
• Plate glass handling
PU Coated
Cut Level 1 Gloves
Nitrile Coated
Cut Level 1 Gloves
Latex Coated
Cut Level 1 Gloves
KeepSafe Pro Nitrile Coated
Cut Level 3 Gloves
KeepSafe Pro PU Coated
Cut Level 3 Gloves
Latex Coated
Cut Level 5 Gloves
Nitrile Foam Coated
Cut Level 5 Gloves
PU Coated Cut Level 5
Gloves
Product Code: 466974
Product Code: 466978
Product Code: 461883
Product Code: 466977 Product Code: 466976
Product Code: 461881
Product Code: 466973Product Code: 466972
• Ideal for intricate handling
• Good grip in dry environments
• Comfortable & high abrasion resistance
• Seamless knitted red nylon liner
• Conforms to EN388 4.1.3.1
• Sizes: 8-10
• Ideal for heavier duty handling
in light engineering and
assembly applications
• Polyurethane coating to palm
and fingers for grip
• High abrasion resistance
• Seamless knitted orange liner
• Elasticated knit wrist for a closer
fitting
• Conforms to EN388 4.3.4.2
• Sizes: 8-10
• Black Latex coating
• Breathable open back
• Excellent wet and dry grip
• Excellent abrasion resistance
• Green stretchable liner
• Conforms to EN388 3.5.4.2
• Sizes: 8-10
• Black breathable nitrile foam coating
• Breathable open back
• Excellent grip in oily and greasy
environments
• Excellent abrasion resistance
• Conforms to EN388 4.5.4.3
• Sizes: 8-10
• Black PU coating
• Breathable open back
• Precision anti-slip grip
• Excellent abrasion resistance
• Green stretchable liner
• Conforms to EN388 4.5.4.3
• Sizes: 8-10
• Ideal for work in damp or
greasy environments
• Nitrile foam coating
ensures excellent grip and
performance
• Dexterous and flexible for
secure handling
• Open back ensure breathability
for added comfort
• Seamless knitted orange liner
• Conforms to EN388 4.3.4.3
• Sizes: 8-10
• Ideal for wet, dry and oily conditions
• Seamless knitted red nylon liner
• Nitrile coating is robust and yet tactile
• Knitted wrist for secure fit
• Conforms to EN388 4.1.3.2
• Sizes: 8-10
• Black Latex coating & breathable back
• Excellent wet and dry grip
• Lightweight design
• Red nylon stretchable liner
• Conforms to EN388 4.1.4.3
• Sizes: 8-10
RED ORANGE GREEN| |
glovescoded
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
HAND PROTECTION
MASTER FILE IDML 3.indd 130 07/08/18 14:14:12
131
NITRILE CHEMICAL HAZARD GLOVES
Product Code: 460937
Product Code: 465415
Product Code: 462893 - Size - 8
Product Code: 460162 - Size - 9
Product Code: 460163 - Size - 10
Product Code: 463871 - Size - 7
13” Nitrile Lined Gauntlets
Juba Ambidexterous Blue Nitrile Fishscale Grip Gloves (12 pairs)
Polyco Green Nitritech III 13” Nitrile Gauntlets
• Flock lined 330mm gauntlet
• Good sensitivity
• Standard chemical
protection
• Liquid proof
• Fully Coated Nitrile to stop
permeation of oils,
lubricants
and chemicals
• Good grip on slippery
objects
• Textured pattern grip
• Conforms to EN388 4.1.0.1,
EN374-2, EN374-3
• Sizes: 7-11
• Unique grip on palm, back & inside for maximum traction
• Fish scale design grip
• 100% nitrile, latex free
• No protein allergy issues
• Food safe and chemical resistant
• Stretch fit for a closer fitting.
• Can also fit under oversleeves.
• Beaded cuff will not flop down.
• Can be worn on either hand.
• Conforms to EN1186, EN374-1, EN374-2
• Sizes: 7-12
• Good abrasion, puncture &
chemical protection (oils, strong
detergents or certain solvents)
• Superior grip for a wide range of
handling applications
• Anatomically shaped to reduce
hand fatigue and increases user
comfort
• Unlined: flock and lint free
• Conforms to EN388 4.0.0.1 &
EN1149 anti-static
• Sizes: 7-10
ORANGE GREEN
UNIQUE FISH SCALE TEXTURED FINISH
Gloves Giving Protection from Chemicals
and Micro-Organisms
HAND PROTECTION
EN374EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 131 07/08/18 14:14:18
NITRILE CHEMICAL HAZARD GLOVES
Product Code: 460937
Product Code: 465415
Product Code: 462893 - Size - 8
Product Code: 460162 - Size - 9
Product Code: 460163 - Size - 10
Product Code: 463871 - Size - 7
13” Nitrile Lined Gauntlets
Juba Ambidexterous Blue Nitrile Fishscale Grip Gloves (12 pairs)
Polyco Green Nitritech III 13” Nitrile Gauntlets
• Flock lined 330mm gauntlet
• Good sensitivity
• Standard chemical
protection
• Liquid proof
• Fully Coated Nitrile to stop
permeation of oils,
lubricants
and chemicals
• Good grip on slippery
objects
• Textured pattern grip
• Conforms to EN388 4.1.0.1,
EN374-2, EN374-3
• Sizes: 7-11
• Unique grip on palm, back & inside for maximum traction
• Fish scale design grip
• 100% nitrile, latex free
• No protein allergy issues
• Food safe and chemical resistant
• Stretch fit for a closer fitting.
• Can also fit under oversleeves.
• Beaded cuff will not flop down.
• Can be worn on either hand.
• Conforms to EN1186, EN374-1, EN374-2
• Sizes: 7-12
• Good abrasion, puncture &
chemical protection (oils, strong
detergents or certain solvents)
• Superior grip for a wide range of
handling applications
• Anatomically shaped to reduce
hand fatigue and increases user
comfort
• Unlined: flock and lint free
• Conforms to EN388 4.0.0.1 &
EN1149 anti-static
• Sizes: 7-10
ORANGE GREEN
UNIQUE FISH SCALE TEXTURED FINISH
Gloves Giving Protection from Chemicals
and Micro-Organisms
HAND PROTECTION
EN374EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 131 07/08/18 14:14:18
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Product Code: 460409
Showa 660 360mm Oil Resistant PVC Gauntlets
• 360mm PVC dipped Oil Resistant Gauntlet
• Resistant to oils, chemicals (hydrochloric acid, caustic
soda, kerosene)
• Durable and solid build yet soft and flexible for easy use
• Soft comfortable cotton lining
• Rough textured coating for added grip and increases
the glove’s abrasion resistance and durability
• Conform to EN388 4.1.2.1, EN374-2:2003 AKL 3.6.3
• Sizes: 8-11
PVC CHEMICAL HAZARD GLOVES
• Durable & flexible Coral finish coating
• Gauntlet design for increased coverage
• Cut level 5 protection
• Excellent grip in wet, oily and dry conditions
• Coral coating is featured for safe food handling
• Breathable cotton liner for added breathability
• Actifresh treated to kill bacteria and promote freshness
• Conforms to EN388:2003 4.5.4.2, EN374-2:2003 AKL 2.7.3
• Sizes: L & XL
Product Code: 464671
Skytec Xenon 5 SKY 59 Chemical Resistant Cut Level 5 Glove
CORAL ROUGH TEXTURE FINISH
HAND PROTECTION
MASTER FILE IDML 3.indd 132 07/08/18 14:14:21
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Product Code: 460409
Showa 660 360mm Oil Resistant PVC Gauntlets
• 360mm PVC dipped Oil Resistant Gauntlet
• Resistant to oils, chemicals (hydrochloric acid, caustic
soda, kerosene)
• Durable and solid build yet soft and flexible for easy use
• Soft comfortable cotton lining
• Rough textured coating for added grip and increases
the glove’s abrasion resistance and durability
• Conform to EN388 4.1.2.1, EN374-2:2003 AKL 3.6.3
• Sizes: 8-11
PVC CHEMICAL HAZARD GLOVES
• Durable & flexible Coral finish coating
• Gauntlet design for increased coverage
• Cut level 5 protection
• Excellent grip in wet, oily and dry conditions
• Coral coating is featured for safe food handling
• Breathable cotton liner for added breathability
• Actifresh treated to kill bacteria and promote freshness
• Conforms to EN388:2003 4.5.4.2, EN374-2:2003 AKL 2.7.3
• Sizes: L & XL
Product Code: 464671
Skytec Xenon 5 SKY 59 Chemical Resistant Cut Level 5 Glove
CORAL ROUGH TEXTURE FINISH
HAND PROTECTION
MASTER FILE IDML 3.indd 132 07/08/18 14:14:21
133
Product Code: 461282 - Size - 8
Product Code: 461281 - Size - 7
Product Code: 461283 - Size - 9
Product Code: 461284 - Size - 10
Product Code: 463699
Product Code: 466001
Polyco Pura Mediumweight PVC Blue Flock Lined Gauntlets
Polyco Long John™ 3413 PVC Coated Gauntlet With An Integral Pvc Sleeve (LINED)
Polysol™ (35cm) Green double dipped PVC Gauntlets
• Ideal for sensitive skin that reacts to natural Latex Proteins
• Textured pattern on the palm offers a slip resistant grip
• Soft internal lining absorbs moisture and keeps hands cool
• Available in a range of colours that can be assigned for
different work types/departments
• Conforms to EN388 2.0.0.0, EN374-2, EN374-3 Foods safe except
for fatty foods, Thickness: 0.55mm (palm thickness)
• Sizes: 7-10
• Excellent resistance to acids and alkalis
• Extra Long length for maximum coverage
• Excellent performance in deep water, muddy or dirty environments
• Resistant to oils and offers good mechanical properties
• Cotton liner for added comfort and breathability
• Adjustable VELCRO® strap for a more secure fit
• Conforms to EN388 4.1.2.1, EN374-2, EN374-3 AKL
• Sizes: 9.5
• Double dipped PVC for superior protection against a variety of
chemicals including hydrocarbons and certain solvents
• Highly durable for demanding work and handling applications
• Soft cotton knitted liner for excellent comfort
• Granular finish for improved grip levels
• Conforms to EN388 4.1.2.1, EN374-2 & 3
• Sizes: 9.5 & 10
PVC CHEMICAL HAZARD GLOVES
64cm
35cm
HAND PROTECTION
Gloves Giving Protection from Chemicals
and Micro-Organisms
EN374EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 133 07/08/18 14:14:24
Product Code: 461282 - Size - 8
Product Code: 461281 - Size - 7
Product Code: 461283 - Size - 9
Product Code: 461284 - Size - 10
Product Code: 463699
Product Code: 466001
Polyco Pura Mediumweight PVC Blue Flock Lined Gauntlets
Polyco Long John™ 3413 PVC Coated Gauntlet With An Integral Pvc Sleeve (LINED)
Polysol™ (35cm) Green double dipped PVC Gauntlets
• Ideal for sensitive skin that reacts to natural Latex Proteins
• Textured pattern on the palm offers a slip resistant grip
• Soft internal lining absorbs moisture and keeps hands cool
• Available in a range of colours that can be assigned for
different work types/departments
• Conforms to EN388 2.0.0.0, EN374-2, EN374-3 Foods safe except
for fatty foods, Thickness: 0.55mm (palm thickness)
• Sizes: 7-10
• Excellent resistance to acids and alkalis
• Extra Long length for maximum coverage
• Excellent performance in deep water, muddy or dirty environments
• Resistant to oils and offers good mechanical properties
• Cotton liner for added comfort and breathability
• Adjustable VELCRO® strap for a more secure fit
• Conforms to EN388 4.1.2.1, EN374-2, EN374-3 AKL
• Sizes: 9.5
• Double dipped PVC for superior protection against a variety of
chemicals including hydrocarbons and certain solvents
• Highly durable for demanding work and handling applications
• Soft cotton knitted liner for excellent comfort
• Granular finish for improved grip levels
• Conforms to EN388 4.1.2.1, EN374-2 & 3
• Sizes: 9.5 & 10
PVC CHEMICAL HAZARD GLOVES
64cm
35cm
HAND PROTECTION
Gloves Giving Protection from Chemicals
and Micro-Organisms
EN374EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 133 07/08/18 14:14:24
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Ansell Emperor ME105 Heavyweight Gauntlet
Product Code: 460700
• Unlined black natural rubber latex glove
• Double wall thickness approx 3mm
• Chlorinated to harden and cleanse the surface of the glove
• Beaded cuff for easy use and tear resistance
• Ideal for where duty protection is needed
• Conforms to EN420-2, EN388 4.1.2.1, EN374 4.6.4.6.5
• Size: 9.5
• 17” length
RUBBER CHEMICAL HAZARD GLOVES
• Protects against a wide range of chemicals and cleaning
agents.
• Chlorinated hardened surface
• Durable design and excellent abrasion resistance
• Soft cotton flock lining keeps hands cool and absorbs
perspiration
• Superior grip in wet and dry environments due to the raised
diamond grip texture
• Thickness: 0.80mm (measured at palm)
• Conforms to EN388 4.1.4.1, EN374-2, EN374-3 AKL, food safe
• Sizes: 6-6.5, 7-7.5, 8-8.5, 9-9.5
• 31cm length
Polyco Jet™ Heavy Duty Natural Rubber Glove - Flock Lined
Keepsafe Heavyweight Lined Black Rubber Gloves
Product Code: 465419 - Size 6-6.5
Product Code: 465876
Product Code: 465418 - Size 7-7.5
Product Code: 465410 - Size 8-8.5
Product Code: 465417 - Size 9-9.5
• Heavyweight rubber design
• Superb resistance to knocks and abrasions
• Excellent resistance to many chemicals.
• Soft cotton flock lining absorbs perspiration,
keeping hands comfortable.
• Slip-resistant patterned grip.
• Food contact approved.
• Conforms to EN 388 3.1.2.1 and EN 374
Complex Design.
• Sizes: S-XL
• 31cm length
HAND PROTECTION
MASTER FILE IDML 3.indd 134 07/08/18 14:14:29
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Ansell Emperor ME105 Heavyweight Gauntlet
Product Code: 460700
• Unlined black natural rubber latex glove
• Double wall thickness approx 3mm
• Chlorinated to harden and cleanse the surface of the glove
• Beaded cuff for easy use and tear resistance
• Ideal for where duty protection is needed
• Conforms to EN420-2, EN388 4.1.2.1, EN374 4.6.4.6.5
• Size: 9.5
• 17” length
RUBBER CHEMICAL HAZARD GLOVES
• Protects against a wide range of chemicals and cleaning
agents.
• Chlorinated hardened surface
• Durable design and excellent abrasion resistance
• Soft cotton flock lining keeps hands cool and absorbs
perspiration
• Superior grip in wet and dry environments due to the raised
diamond grip texture
• Thickness: 0.80mm (measured at palm)
• Conforms to EN388 4.1.4.1, EN374-2, EN374-3 AKL, food safe
• Sizes: 6-6.5, 7-7.5, 8-8.5, 9-9.5
• 31cm length
Polyco Jet™ Heavy Duty Natural Rubber Glove - Flock Lined
Keepsafe Heavyweight Lined Black Rubber Gloves
Product Code: 465419 - Size 6-6.5
Product Code: 465876
Product Code: 465418 - Size 7-7.5
Product Code: 465410 - Size 8-8.5
Product Code: 465417 - Size 9-9.5
• Heavyweight rubber design
• Superb resistance to knocks and abrasions
• Excellent resistance to many chemicals.
• Soft cotton flock lining absorbs perspiration,
keeping hands comfortable.
• Slip-resistant patterned grip.
• Food contact approved.
• Conforms to EN 388 3.1.2.1 and EN 374
Complex Design.
• Sizes: S-XL
• 31cm length
HAND PROTECTION
MASTER FILE IDML 3.indd 134 07/08/18 14:14:29
135
NITRILE DISPOSABLE GLOVES
Keepsafe Blue Nitrile Powder-
Free Gloves
Polyco FHD50 Finite HD Disposable 30cm Gloves
SN72 Plus Standard Nitrile Blue
Powder-Free Gloves
Skytec Utah Blue Powder-free
Nitrile Disposable Gloves
PN30 Glove Plus Prime Powder-Free Blue Nitrile
Gloves
Ansell 92-500 Touch N Tuff Green
Powdered Nitrile Gloves (100)
PNB30 Plus Prime Black Nitrile
Powder-Free Gloves (100)
Polyco GL899 Nitrile Blue
Powdered Disposable Gloves
Product Code: 464954
Powder-free
Product Code: 464953
Powdered
Product Code: 467061
Product Code: 460975 - Size - 7
Product Code: 460976 - Size - 8
Product Code: 460977 - Size - 9
Product Code: 460978 - Size - 10
Product Code: 460191
Product Code: 460932
Product Code: 460125
Product Code: 461830
Product Code: 460933
• Disposable Nitrile Gloves
• 100% nitrile.
• Approved for use with food preparation.
• Box of 100
• For minimal risks only. AQL 4.O.
• Sizes: S-XL
• Significantly stronger alternative to latex
• Comfortable with a ‘second skin’ feel
• Resistant to oils, acids and many chemicals
• Conforms to EN374-2, EN374:2003,
EN2002:72 EC CAT III
• Box of 100 x10
• Sizes: S-XL
• AQL 1.5
• Ideal for use in areas of low risk where
splash exposure with chemicals is low
• Nitrile, powder free & non-sterile glove
• Sensitive & textured fingertip grip
• Conforms to EN420 Dexterity level 5,
AQL: 0.65, EU MDD EN455 Parts 1 & 2 -
Medical Grade, EU PPE Class III
• Box of 100
• Sizes: S-XL
• Offers protection against contamination,
dirt and potential irritants
• Textured fingertips for increased grip
• Rolled cuff for additional strength and
prevents liquid rollback
• AQL 4.0, for minimal risks only
• Box of 100
• Sizes: S-XL
• Extra strong build for repeat use
• Soft and sensitive enough to be
used a disposable
• Nitrile contains none of the
proteins found in natural rubber
• The 30cm beaded cuff
provides additional protection
to the forearm and prevents
liquid rollback
• Conforms to EN374 (Category
III - Complex Design), AQL 1.5
• Box of 50
• Sizes: S-XL
• Nitrile cost effective examination
gloves
• Protects against biohazards and a
wide range of general chemicals
• Powder free & non-sterile
• Increased fingertip sensitivity
• Textured fingertips for added grip
• Conforms to Medical Grade &
EU PPE Class III Certified, Viral test
passed, Level 5 EN420 Dexterity
• AQL: 0.65
• Box of 100
• Sizes: S-XL
• Protects against general chemicals
• 4 times the puncture resistance of latex
• 100% NR Latex free
• Roll cuff to prevent liquid roll back
• Conforms to EN374 Part 3, ISO 16044b:2003,
AQL of 0.65, EN420 (dexterity) Level 5
• Box of 100
• Sizes: S-XL
• Three times the puncture resistance of
latex or PVC disposable gloves
• Rolled cuff for to prevent liquid roll back
against hazardous chemicals
• Conforms to AQL 1.5 (EN374), Medical
Grade & EU PPE Class III
• Box of 100
• Sizes: S-XL
HAND PROTECTION
EN374 EN420
Gloves Giving Protection
from Chemicals and
Micro-Organisms
This standard defines the general
requirements for protective gloves in terms of
construction, fitness of purpose, safety, etc
AQL
“Acceptable Quality Level” - Any glove with an AQL of 1.5 means that there is a statistical
probability that 1.5% of any tested batch could have pinhole defects. Higher numbers such
as 4.0 would be used for lower risk tasks.
MASTER FILE IDML 3.indd 135 07/08/18 14:14:34
NITRILE DISPOSABLE GLOVES
Keepsafe Blue Nitrile Powder-
Free Gloves
Polyco FHD50 Finite HD Disposable 30cm Gloves
SN72 Plus Standard Nitrile Blue
Powder-Free Gloves
Skytec Utah Blue Powder-free
Nitrile Disposable Gloves
PN30 Glove Plus Prime Powder-Free Blue Nitrile
Gloves
Ansell 92-500 Touch N Tuff Green
Powdered Nitrile Gloves (100)
PNB30 Plus Prime Black Nitrile
Powder-Free Gloves (100)
Polyco GL899 Nitrile Blue
Powdered Disposable Gloves
Product Code: 464954
Powder-free
Product Code: 464953
Powdered
Product Code: 467061
Product Code: 460975 - Size - 7
Product Code: 460976 - Size - 8
Product Code: 460977 - Size - 9
Product Code: 460978 - Size - 10
Product Code: 460191
Product Code: 460932
Product Code: 460125
Product Code: 461830
Product Code: 460933
• Disposable Nitrile Gloves
• 100% nitrile.
• Approved for use with food preparation.
• Box of 100
• For minimal risks only. AQL 4.O.
• Sizes: S-XL
• Significantly stronger alternative to latex
• Comfortable with a ‘second skin’ feel
• Resistant to oils, acids and many chemicals
• Conforms to EN374-2, EN374:2003,
EN2002:72 EC CAT III
• Box of 100 x10
• Sizes: S-XL
• AQL 1.5
• Ideal for use in areas of low risk where
splash exposure with chemicals is low
• Nitrile, powder free & non-sterile glove
• Sensitive & textured fingertip grip
• Conforms to EN420 Dexterity level 5,
AQL: 0.65, EU MDD EN455 Parts 1 & 2 -
Medical Grade, EU PPE Class III
• Box of 100
• Sizes: S-XL
• Offers protection against contamination,
dirt and potential irritants
• Textured fingertips for increased grip
• Rolled cuff for additional strength and
prevents liquid rollback
• AQL 4.0, for minimal risks only
• Box of 100
• Sizes: S-XL
• Extra strong build for repeat use
• Soft and sensitive enough to be
used a disposable
• Nitrile contains none of the
proteins found in natural rubber
• The 30cm beaded cuff
provides additional protection
to the forearm and prevents
liquid rollback
• Conforms to EN374 (Category
III - Complex Design), AQL 1.5
• Box of 50
• Sizes: S-XL
• Nitrile cost effective examination
gloves
• Protects against biohazards and a
wide range of general chemicals
• Powder free & non-sterile
• Increased fingertip sensitivity
• Textured fingertips for added grip
• Conforms to Medical Grade &
EU PPE Class III Certified, Viral test
passed, Level 5 EN420 Dexterity
• AQL: 0.65
• Box of 100
• Sizes: S-XL
• Protects against general chemicals
• 4 times the puncture resistance of latex
• 100% NR Latex free
• Roll cuff to prevent liquid roll back
• Conforms to EN374 Part 3, ISO 16044b:2003,
AQL of 0.65, EN420 (dexterity) Level 5
• Box of 100
• Sizes: S-XL
• Three times the puncture resistance of
latex or PVC disposable gloves
• Rolled cuff for to prevent liquid roll back
against hazardous chemicals
• Conforms to AQL 1.5 (EN374), Medical
Grade & EU PPE Class III
• Box of 100
• Sizes: S-XL
HAND PROTECTION
EN374 EN420
Gloves Giving Protection
from Chemicals and
Micro-Organisms
This standard defines the general
requirements for protective gloves in terms of
construction, fitness of purpose, safety, etc
AQL
“Acceptable Quality Level” - Any glove with an AQL of 1.5 means that there is a statistical
probability that 1.5% of any tested batch could have pinhole defects. Higher numbers such
as 4.0 would be used for lower risk tasks.
MASTER FILE IDML 3.indd 135 07/08/18 14:14:34
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
UNG3 Gloves Plus Ultra Green
Nitrile Powder-Free Gloves
Polyco FN100 Blue Finite Powder-Free Nitrile
Gloves
UNP3 Gloves Plus Ultra Purple
Nitrile Powder-Free Gloves
Polyco GL895 Blue Nitrile Powder-Free Gloves
Juba 580OR Orange Nitrile
Powder-Free Gloves
Product Code: 461829
Product Code: 462648
Product Code: 460107
Product Code: 462649
Product Code: 465872
• Fingertip textured for precision grip
• 100% silicone free & 100% NR Latex free
• For use in areas of medium-high risk areas
where chemicals is common
• Conforms to EN374 parts 1, 2 & 3, EU
Medical Grade & EU PPE Class III, Viral
test passed. EN420 Dexterity test passed-
level 5, AQL 0.65
• Box of 100
• Sizes: S-XL
• Protect from oils, acids and
other chemicals.
• Rolled cuff
• Suitable for sensitive skin
• Prevents contamination
• Textured fingertips
• Food Processing, Laboratory
Work, Electronics, General
Assembly and Automotive
Maintenance & Repair
• Conforms to EN374-2,
EN374-3, AQL 1.5. Food test
approved
• Box of 100
• Sizes: S-XL
• Protects from potentially harmful irritants
• Powder-free
• Textured fingertips offer extra grip.
• The rolled cuff prevents liquid roll back. USES
• Applications: Food Processing, General Assembly,
Local Authority Work
• For minimal risks only. Can be used for food
preparation
• Box of 100
• Sizes: S-XL
• Fingertip textured for precision grip
• 100% silicone free & 100% NR Latex free
• For use in areas of medium-high risk areas
where chemicals is common
• Conforms to EN374 parts 1, 2 & 3, EU
Medical Grade & EU PPE Class III, Viral
test passed. EN420 Dexterity test passed-
level 5, AQL 0.65
• Box of 100
• Sizes: S-XL
• Durable in oily environments
• Double sided fish scale grip on palm, back
and inside for extra grip
• 100% nitrile, no latex, no protein allergy risk
• Chemical resistant
• Ambidextrous with beaded cuffs
• EN 474-2, EN474-3, Food approved
• Box of 50, aql 1.5
• Sizes: S-XL
NITRILE DISPOSABLE GLOVES
HAND PROTECTION
MASTER FILE IDML 3.indd 136 07/08/18 14:14:38
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
UNG3 Gloves Plus Ultra Green
Nitrile Powder-Free Gloves
Polyco FN100 Blue Finite Powder-Free Nitrile
Gloves
UNP3 Gloves Plus Ultra Purple
Nitrile Powder-Free Gloves
Polyco GL895 Blue Nitrile Powder-Free Gloves
Juba 580OR Orange Nitrile
Powder-Free Gloves
Product Code: 461829
Product Code: 462648
Product Code: 460107
Product Code: 462649
Product Code: 465872
• Fingertip textured for precision grip
• 100% silicone free & 100% NR Latex free
• For use in areas of medium-high risk areas
where chemicals is common
• Conforms to EN374 parts 1, 2 & 3, EU
Medical Grade & EU PPE Class III, Viral
test passed. EN420 Dexterity test passed-
level 5, AQL 0.65
• Box of 100
• Sizes: S-XL
• Protect from oils, acids and
other chemicals.
• Rolled cuff
• Suitable for sensitive skin
• Prevents contamination
• Textured fingertips
• Food Processing, Laboratory
Work, Electronics, General
Assembly and Automotive
Maintenance & Repair
• Conforms to EN374-2,
EN374-3, AQL 1.5. Food test
approved
• Box of 100
• Sizes: S-XL
• Protects from potentially harmful irritants
• Powder-free
• Textured fingertips offer extra grip.
• The rolled cuff prevents liquid roll back. USES
• Applications: Food Processing, General Assembly,
Local Authority Work
• For minimal risks only. Can be used for food
preparation
• Box of 100
• Sizes: S-XL
• Fingertip textured for precision grip
• 100% silicone free & 100% NR Latex free
• For use in areas of medium-high risk areas
where chemicals is common
• Conforms to EN374 parts 1, 2 & 3, EU
Medical Grade & EU PPE Class III, Viral
test passed. EN420 Dexterity test passed-
level 5, AQL 0.65
• Box of 100
• Sizes: S-XL
• Durable in oily environments
• Double sided fish scale grip on palm, back
and inside for extra grip
• 100% nitrile, no latex, no protein allergy risk
• Chemical resistant
• Ambidextrous with beaded cuffs
• EN 474-2, EN474-3, Food approved
• Box of 50, aql 1.5
• Sizes: S-XL
NITRILE DISPOSABLE GLOVES
HAND PROTECTION
MASTER FILE IDML 3.indd 136 07/08/18 14:14:38
137
Polyco GL818 Natural Powdered Disposable Latex Glove (100)
Natural Latex Powder-Free Disposable Gloves (100)
Natural Latex Powdered Disposable Gloves (100)
Product Code: 462649
Product Code: 461825
Product Code: 465425
Product Code: 465424
LATEX DISPOSABLE GLOVES
• Protects against contamination of
potential irritants & dirt
• Excellent dexterity, comfort and sensitivity
• Textured surface for added precision grip
• Powdered for sweat absorption and
easy donning
• Made from natural latex
• Features a rolled cuff to prevent liquid
roll back and improves strength around
the wrist
• AQL 4.0. For minimal risks only
• Box of 100
• Sizes: S-XL
• Powder-free
• Provides maximum dexterity,
sensitivity and comfort
• Made from natural latex
• Textured finish for improved grip
• Rolled cuff for additional strength
and prevention of liquid roll back
• AQL 4.0. For minimal risks only.
Can be used for food preparation
• Box of 100
• Size S-XL
• Lightly powdered for easy
donning and sweat absorption
• Provides maximum dexterity,
sensitivity and comfort
• Made from natural latex
• Textured finish for improved grip
• Rolled cuff for additional strength
and prevention of liquid roll back
• AQL 4.0. For minimal risks only.
Can be used for food preparation
• Box of 100
• Size S-XL
HAND PROTECTION
AQL EN 474-2
EN 474-3
“Acceptable Quality Level” - Any glove with an AQL of 1.5 means that there
is a statistical probability that 1.5% of any tested batch could have pinhole
defects. Higher numbers such as 4.0 would be used for lower risk tasks.
BS EN 474-2 deals with all significant hazards, hazardous situations and events
relevant to wheel and crawler tractor-dozers as defined in EN ISO 6165:2006
BS EN 474-3 also deals with fork application, single heavy object handling
application, object handling application and log handling.
MASTER FILE IDML 3.indd 137 07/08/18 14:14:42
Polyco GL818 Natural Powdered Disposable Latex Glove (100)
Natural Latex Powder-Free Disposable Gloves (100)
Natural Latex Powdered Disposable Gloves (100)
Product Code: 462649
Product Code: 461825
Product Code: 465425
Product Code: 465424
LATEX DISPOSABLE GLOVES
• Protects against contamination of
potential irritants & dirt
• Excellent dexterity, comfort and sensitivity
• Textured surface for added precision grip
• Powdered for sweat absorption and
easy donning
• Made from natural latex
• Features a rolled cuff to prevent liquid
roll back and improves strength around
the wrist
• AQL 4.0. For minimal risks only
• Box of 100
• Sizes: S-XL
• Powder-free
• Provides maximum dexterity,
sensitivity and comfort
• Made from natural latex
• Textured finish for improved grip
• Rolled cuff for additional strength
and prevention of liquid roll back
• AQL 4.0. For minimal risks only.
Can be used for food preparation
• Box of 100
• Size S-XL
• Lightly powdered for easy
donning and sweat absorption
• Provides maximum dexterity,
sensitivity and comfort
• Made from natural latex
• Textured finish for improved grip
• Rolled cuff for additional strength
and prevention of liquid roll back
• AQL 4.0. For minimal risks only.
Can be used for food preparation
• Box of 100
• Size S-XL
HAND PROTECTION
AQL EN 474-2
EN 474-3
“Acceptable Quality Level” - Any glove with an AQL of 1.5 means that there
is a statistical probability that 1.5% of any tested batch could have pinhole
defects. Higher numbers such as 4.0 would be used for lower risk tasks.
BS EN 474-2 deals with all significant hazards, hazardous situations and events
relevant to wheel and crawler tractor-dozers as defined in EN ISO 6165:2006
BS EN 474-3 also deals with fork application, single heavy object handling
application, object handling application and log handling.
MASTER FILE IDML 3.indd 137 07/08/18 14:14:42
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
VINYL DISPOSABLE GLOVES
Clear Vinyl Powdered Disposable Gloves (100)
Polyco GL62 Clear Powder-Free
Vinyl Disposable Gloves (100)
Blue Vinyl Powdered Clear Disposable Gloves
(100)
Clear Vinyl Powder-Free
Disposable Gloves (100)
Detectamet X31 Metal
Detectable Vinyl Gloves (100)
Product Code: 465422
Product Code: 462390
Product Code: 464950
Product Code: 464949 Product Code: 469187
• No latex protein
• Protects against
contamination, irritants and
dirt
• Lightly powdered for sweat
absorption and easy donning
• Rolled cuff for preventing
liquid roll back and additional
strength around the wrist area
• AQL 4.0. Minimal risks only
• Food contact approved
except fatty foods
• Box of 100
• Sizes: S-XL
• Powder-free
• No latex protein
• Protects against
contamination, irritants and dirt
• Rolled cuff for preventing
liquid roll back and additional
strength around the wrist area
• AQL 4.0. Minimal risks only
• Food contact approved
except fatty foods
• Box of 100
• Sizes: S-XL
• Powder-free
• Ideal for food handling
• Protects from contamination, bacteria
and dirt
• Can be detected if parts fall into food
preparation by a electromagnetic range
of 50Khz-1Mhz
• Rolled cuffs for added strength and
prevents liquid roll back
• For minimal risks only. Conforms to (EC)
no.1935/2004. (EU)No.10/2011. (EC)
No.2023/2006
• Box of 100
• Sizes: S-XL
• Sensitive touch
• No latex proteins used
• Soft touch vinyl finish
• Flexible and highly dexterous
• Powder Free
• Rolled Cuff provides additional
strength and prevents liquid roll back
• AQL 1.5. For minimal risks only
• Food contact approved, except
fatty foods.
• Box of 100
• Sizes: S-XL
• Smooth exterior
• Protects against
contamination, dirt and
irritants
• No latex protein
• Clear blue finish vinyl
• Beaded cuff for added
strength and to prevent liquid
roll back
• Lightly powdered for easy
donning and absorption of
internal moisture
• Ambidextrous to be worn on
either hand
• Packed in dispenser boxes
• Approved for food use except
fatty foods. For minimal risks
only
• Box of 100
• Sizes: S-XL
HAND PROTECTION
MASTER FILE IDML 3.indd 138 07/08/18 14:14:50
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
VINYL DISPOSABLE GLOVES
Clear Vinyl Powdered Disposable Gloves (100)
Polyco GL62 Clear Powder-Free
Vinyl Disposable Gloves (100)
Blue Vinyl Powdered Clear Disposable Gloves
(100)
Clear Vinyl Powder-Free
Disposable Gloves (100)
Detectamet X31 Metal
Detectable Vinyl Gloves (100)
Product Code: 465422
Product Code: 462390
Product Code: 464950
Product Code: 464949 Product Code: 469187
• No latex protein
• Protects against
contamination, irritants and
dirt
• Lightly powdered for sweat
absorption and easy donning
• Rolled cuff for preventing
liquid roll back and additional
strength around the wrist area
• AQL 4.0. Minimal risks only
• Food contact approved
except fatty foods
• Box of 100
• Sizes: S-XL
• Powder-free
• No latex protein
• Protects against
contamination, irritants and dirt
• Rolled cuff for preventing
liquid roll back and additional
strength around the wrist area
• AQL 4.0. Minimal risks only
• Food contact approved
except fatty foods
• Box of 100
• Sizes: S-XL
• Powder-free
• Ideal for food handling
• Protects from contamination, bacteria
and dirt
• Can be detected if parts fall into food
preparation by a electromagnetic range
of 50Khz-1Mhz
• Rolled cuffs for added strength and
prevents liquid roll back
• For minimal risks only. Conforms to (EC)
no.1935/2004. (EU)No.10/2011. (EC)
No.2023/2006
• Box of 100
• Sizes: S-XL
• Sensitive touch
• No latex proteins used
• Soft touch vinyl finish
• Flexible and highly dexterous
• Powder Free
• Rolled Cuff provides additional
strength and prevents liquid roll back
• AQL 1.5. For minimal risks only
• Food contact approved, except
fatty foods.
• Box of 100
• Sizes: S-XL
• Smooth exterior
• Protects against
contamination, dirt and
irritants
• No latex protein
• Clear blue finish vinyl
• Beaded cuff for added
strength and to prevent liquid
roll back
• Lightly powdered for easy
donning and absorption of
internal moisture
• Ambidextrous to be worn on
either hand
• Packed in dispenser boxes
• Approved for food use except
fatty foods. For minimal risks
only
• Box of 100
• Sizes: S-XL
HAND PROTECTION
MASTER FILE IDML 3.indd 138 07/08/18 14:14:50
139
THERMAL HEAT PROTECTION
Goatskin Grey Welding Gauntlets
Double Palm Superior Welders
Gauntlets
Product Code: 460987 Product Code: 460966
• Soft leather ensures maximum sensitivity
and dexterity
• Quality finish for maximum heat
protection
• Soft-feel goatskin leather fingers and
palm for extra comfort
• The Nappa leather provides extra
durability.
• Chrome split leather on the 6” cuff
• Light and flexible overall build
• Special Mordant treatment keep colours
permanent
• Conforms to EN388 3.0.2.2 & EN407
4.1.X.X.4.X
• Size: One size
• Kevlar sewn throughout for superior
strength
• One piece back
• Excellent abrasion and puncture
resistance
• Typical applications: welding & grinding
• This glove cannot protect from heat
exceeding 100°c
• Reinforced full double palm and thumb
• Conforms to EN388 3.2.44, EN407
4.X.X.X.4.X
• Size One size
• Coated glass fabric with Kevlar® felt and
glass gloves mitten with aluminised glass
fabric cuff
• Cotton terry liner for excellent comfort
• Protects against contact temperature up
to 500°C for 27 seconds
• Ideally used for handling very hot objects
in hot environments
• Mitten length gives extra low impact
protection to wrist and forearm
• Conforms to EN388 2X4X & EN407 44XX34,
CAT II design
• Sizes: One size
Product Code: 461286
Polyco 7576 Foundry Heatbeater
40cm Grey Gauntlets
Ejendals Tegera 17 Lined
Heat Resistant Gloves
• High grade split cowhide leather
palm & fingers
• Full jersey lining
• Reinforced seams for added
strength
• 180° elasticated fastening
• Dexterous for precise handling work
• Withstands contact heat up to
100°C
• Ideal for heavy work applications
(engineering, automotive)
• Conforms to EN388 3.2.2.3, EN407
4.1.3.X.4.X, Cat 2 Design
• Sizes: 8,10 & 11
Product Code: 467567Product Code: 461299
Polyco LW93 Weldmaster
Premium Quality Red Welders
Gauntlets
• Polyco LW93 Weldmaster 35Cm
Red Gauntlets
• Excellent puncture/abrasion
resistance
• One piece back
• 35cm length for extra coverage
• Made from premium quality
chrome leather
• Made and designed specifically for
type A (Mig / Arc welding)
• Conforms to EN388 3.2.4.4, EN407
4.2.3.X.4.X
• Size 10
Product Code: 465972 Product Code: 465718
Keepsafe S15 Blue Leather
Welders Gauntlets
Keepsafe S10 Comfort
Red Leather Welders
Gauntlets
• Quality shoulder split leather
• Fully lined
• Excellent abrasion and
puncture resistance
• One piece back
• Hard wearing
• Fully lined for extra comfort
• Contact heat rated for
protection from welding
applications
• EN388 4.1.4.4 EN407 413X4X
• Size: One size
• Hard wearing cow split leather
• Fully lined
• Excellent abrasion & puncture
resistance
• Contact heat rated for
protection from welding
applications
• Conforms to EN388 3.1.4.4 &
EN407 414XX4X
• Size 10.5
HAND PROTECTION
AQL - “Acceptable Quality Level” - Any
glove with an AQL of 1.5 means that there is a
statistical probability that 1.5% of any tested batch
could have pinhole defects. Higher numbers such
as 4.0 would be used for lower risk tasks.
EN407 - Flame Resistant
For details, see P106-7
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 139 07/08/18 14:14:54
THERMAL HEAT PROTECTION
Goatskin Grey Welding Gauntlets
Double Palm Superior Welders
Gauntlets
Product Code: 460987 Product Code: 460966
• Soft leather ensures maximum sensitivity
and dexterity
• Quality finish for maximum heat
protection
• Soft-feel goatskin leather fingers and
palm for extra comfort
• The Nappa leather provides extra
durability.
• Chrome split leather on the 6” cuff
• Light and flexible overall build
• Special Mordant treatment keep colours
permanent
• Conforms to EN388 3.0.2.2 & EN407
4.1.X.X.4.X
• Size: One size
• Kevlar sewn throughout for superior
strength
• One piece back
• Excellent abrasion and puncture
resistance
• Typical applications: welding & grinding
• This glove cannot protect from heat
exceeding 100°c
• Reinforced full double palm and thumb
• Conforms to EN388 3.2.44, EN407
4.X.X.X.4.X
• Size One size
• Coated glass fabric with Kevlar® felt and
glass gloves mitten with aluminised glass
fabric cuff
• Cotton terry liner for excellent comfort
• Protects against contact temperature up
to 500°C for 27 seconds
• Ideally used for handling very hot objects
in hot environments
• Mitten length gives extra low impact
protection to wrist and forearm
• Conforms to EN388 2X4X & EN407 44XX34,
CAT II design
• Sizes: One size
Product Code: 461286
Polyco 7576 Foundry Heatbeater
40cm Grey Gauntlets
Ejendals Tegera 17 Lined
Heat Resistant Gloves
• High grade split cowhide leather
palm & fingers
• Full jersey lining
• Reinforced seams for added
strength
• 180° elasticated fastening
• Dexterous for precise handling work
• Withstands contact heat up to
100°C
• Ideal for heavy work applications
(engineering, automotive)
• Conforms to EN388 3.2.2.3, EN407
4.1.3.X.4.X, Cat 2 Design
• Sizes: 8,10 & 11
Product Code: 467567Product Code: 461299
Polyco LW93 Weldmaster
Premium Quality Red Welders
Gauntlets
• Polyco LW93 Weldmaster 35Cm
Red Gauntlets
• Excellent puncture/abrasion
resistance
• One piece back
• 35cm length for extra coverage
• Made from premium quality
chrome leather
• Made and designed specifically for
type A (Mig / Arc welding)
• Conforms to EN388 3.2.4.4, EN407
4.2.3.X.4.X
• Size 10
Product Code: 465972 Product Code: 465718
Keepsafe S15 Blue Leather
Welders Gauntlets
Keepsafe S10 Comfort
Red Leather Welders
Gauntlets
• Quality shoulder split leather
• Fully lined
• Excellent abrasion and
puncture resistance
• One piece back
• Hard wearing
• Fully lined for extra comfort
• Contact heat rated for
protection from welding
applications
• EN388 4.1.4.4 EN407 413X4X
• Size: One size
• Hard wearing cow split leather
• Fully lined
• Excellent abrasion & puncture
resistance
• Contact heat rated for
protection from welding
applications
• Conforms to EN388 3.1.4.4 &
EN407 414XX4X
• Size 10.5
HAND PROTECTION
AQL - “Acceptable Quality Level” - Any
glove with an AQL of 1.5 means that there is a
statistical probability that 1.5% of any tested batch
could have pinhole defects. Higher numbers such
as 4.0 would be used for lower risk tasks.
EN407 - Flame Resistant
For details, see P106-7
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 139 07/08/18 14:14:54
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Black Latex Hi-Vis Thermal Gloves
Showa 451 Thermo Grey Latex
Coated Thermal Gloves
3/4 Dipped Black Nitrile Thermal
Gloves
Product Code: 462870
Hi-Vis Orange
Product Code: 460990
Hi-Vis Yellow
Product Code: 461894
• Specially designed for use in cold conditions
• Crinkle latex grip offers excellent grip
• Palm dipped to increase dexterity and ventilation
• Warm 10 gauge acrylic liner for cold protection
• CE certified
• Conforms to EN388 1.1.4.2 & EN511 X.1.X
• Sizes: XS-XXL
• Latex coated palm
• Breathable back of hand to reduce
perspiration
• Surface provides a tactile feel and
excellent grip
• Designed for easy movement and
continuous wear
• Seamless for optimum comfort
• Colour helps extend wearable life
• Sizes: 7-10
• EN388:2003 2.2.4.1
• Warm seamless knitted acrylic terry liner
• Elasticated wrist for a secure fit
• 3/4 dipped black nitrile for excellent abrasion
resistance and grip
• For use in cold storage, construction and
handling in cold environments
• Conforms to EN388 4.2.2.2
• Pack of 12
• Sizes: 9 & 10
Leather Warm Lined Knit Wrist
Freezer Gloves
Black Latex White
Thermal Gloves
Product Code: 460881 Product Code: 465377
• Leather Freezer Gloves
• High quality yellow cow hide leather palm
and back
• Fully fleece lined
• Elasticated wrist for a closer fitting and
heat retention
• Not to be used with liquids
• Typical Applications: Cold stores, general
handling in cold conditions
• Conforms to EN388 2.1.2.1
• Sizes: 10
• Inner terry loop protects from coldness
• Blend of polyester and cotton
• Rough latex coating on palm
• Not suitable for oily conditions
• Glove may loose its insulative properties
if wet
• Area of use: Construction and building,
• Glaziery, Load and unload.
• Moderate cold applications.
• Conforms to EN 388 2.2.4.1 and EN511 010
• Sizes: M-XL
THERMAL COLD PROTECTION
Product Code: 460407
HAND PROTECTION
MASTER FILE IDML 3.indd 140 07/08/18 14:15:03
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Black Latex Hi-Vis Thermal Gloves
Showa 451 Thermo Grey Latex
Coated Thermal Gloves
3/4 Dipped Black Nitrile Thermal
Gloves
Product Code: 462870
Hi-Vis Orange
Product Code: 460990
Hi-Vis Yellow
Product Code: 461894
• Specially designed for use in cold conditions
• Crinkle latex grip offers excellent grip
• Palm dipped to increase dexterity and ventilation
• Warm 10 gauge acrylic liner for cold protection
• CE certified
• Conforms to EN388 1.1.4.2 & EN511 X.1.X
• Sizes: XS-XXL
• Latex coated palm
• Breathable back of hand to reduce
perspiration
• Surface provides a tactile feel and
excellent grip
• Designed for easy movement and
continuous wear
• Seamless for optimum comfort
• Colour helps extend wearable life
• Sizes: 7-10
• EN388:2003 2.2.4.1
• Warm seamless knitted acrylic terry liner
• Elasticated wrist for a secure fit
• 3/4 dipped black nitrile for excellent abrasion
resistance and grip
• For use in cold storage, construction and
handling in cold environments
• Conforms to EN388 4.2.2.2
• Pack of 12
• Sizes: 9 & 10
Leather Warm Lined Knit Wrist
Freezer Gloves
Black Latex White
Thermal Gloves
Product Code: 460881 Product Code: 465377
• Leather Freezer Gloves
• High quality yellow cow hide leather palm
and back
• Fully fleece lined
• Elasticated wrist for a closer fitting and
heat retention
• Not to be used with liquids
• Typical Applications: Cold stores, general
handling in cold conditions
• Conforms to EN388 2.1.2.1
• Sizes: 10
• Inner terry loop protects from coldness
• Blend of polyester and cotton
• Rough latex coating on palm
• Not suitable for oily conditions
• Glove may loose its insulative properties
if wet
• Area of use: Construction and building,
• Glaziery, Load and unload.
• Moderate cold applications.
• Conforms to EN 388 2.2.4.1 and EN511 010
• Sizes: M-XL
THERMAL COLD PROTECTION
Product Code: 460407
HAND PROTECTION
MASTER FILE IDML 3.indd 140 07/08/18 14:15:03
141
Skytec Argon Double Insulated
Gloves
Showa 451 Latex Grip Gloves With
Thermal Lining
Uvex 60592 Unilite Thermo Plus
Gloves
Product Code: 460593 Product Code: 460407 Product Code: 467825
• Double insulated soft inner nylon liner
• Retains performance in temperatures as
low as –50ºC
• HPT 3/4 foam coating for extra coverage
and grip
• Additional foam coating on palm,
knuckles & fingers
• Anatomically designed for comfort/fit
• Ideal for cold environments
• Actifresh treated to kill bacteria and
retain freshness
• Conforms to EN388 3.2.3.2, EN511 0.2.0,
Food contact approved
• Sizes: 8-11
• Superior resistance to abrasion
• For heavy duty manual handling in cold
environments
• Breathable back
• Excellent dexterity/durability and lifespan
• Seamless for optimum comfort
• May cause latex allergies
• Conforms to EN388 2.2.4.1, EN511: 2006
0.1.0
• Sizes: 7-10
• Winter or cold use safety gloves
• Extremely robust coating stays flexible
even at low temperatures
• Robust HPT foam coating - spongy soft,
durable and flexible coating repels liquids
for excellent grip in wet, dry or oily
conditions
• Acrylic and new wool mix liner helps
insulate from the cold
• Soft to touch and absorbs perspiration
• Conforms to EN388 3231, EN511 010
• Sizes: 7-11
GUIDE 5148W Synthetic Leather
PU Coated Thermal Gloves
GUIDE 46W Winter Fleece Lined
Goat Leather Gloves
Ejendals 297 Thinsulate Leather
Waterproof Gloves
Product Code: 467330 Product Code: 467217 Product Code: 468286
• Made from durable synthetic leather
• PU Palm coated for excellent grip
• Hi-Vis yellow spandex back for excellent
visibility
• Fully lined for comfort and flexibility
• Cuff for added protection and coverage
• Waterproof membrane and fully winter
lined with a soft fleece
• Suitable for work outdoors in construction,
plant and crafts.
• Conforms to EN388 2.2.2.1, EN511 1.2.X
• Sizes 8-12
• Padded knuckles for good impact and
scratch protection
• High performance warm fleece lining
• Elasticated wrists for heat retention and a
secure fit
• Stretch textile back
• Reinforced index finger and fingertips
• Ergonomic fitting around the thumb
• EN388 2.1.2.1, EN511 0.2.X
• Sizes 8-11
• Winter-lined
• 0,7-0,8 mm
• Full grain goatskin
• Neoprene, Spandex, Thinsulate™
• 100g weight, Cat. II design
• Reinforced fingers and thumb
• Waterproof
• Velcro® wrist cuff fasteners for a tight fit
• Ideally for all-round work
• EN 388:2003, 2122 EN 511:2006, 120
• Sizes: 8-11
THERMAL COLD PROTECTION
HAND PROTECTION
EN511
Protection from the Cold
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 141 07/08/18 14:15:06
Skytec Argon Double Insulated
Gloves
Showa 451 Latex Grip Gloves With
Thermal Lining
Uvex 60592 Unilite Thermo Plus
Gloves
Product Code: 460593 Product Code: 460407 Product Code: 467825
• Double insulated soft inner nylon liner
• Retains performance in temperatures as
low as –50ºC
• HPT 3/4 foam coating for extra coverage
and grip
• Additional foam coating on palm,
knuckles & fingers
• Anatomically designed for comfort/fit
• Ideal for cold environments
• Actifresh treated to kill bacteria and
retain freshness
• Conforms to EN388 3.2.3.2, EN511 0.2.0,
Food contact approved
• Sizes: 8-11
• Superior resistance to abrasion
• For heavy duty manual handling in cold
environments
• Breathable back
• Excellent dexterity/durability and lifespan
• Seamless for optimum comfort
• May cause latex allergies
• Conforms to EN388 2.2.4.1, EN511: 2006
0.1.0
• Sizes: 7-10
• Winter or cold use safety gloves
• Extremely robust coating stays flexible
even at low temperatures
• Robust HPT foam coating - spongy soft,
durable and flexible coating repels liquids
for excellent grip in wet, dry or oily
conditions
• Acrylic and new wool mix liner helps
insulate from the cold
• Soft to touch and absorbs perspiration
• Conforms to EN388 3231, EN511 010
• Sizes: 7-11
GUIDE 5148W Synthetic Leather
PU Coated Thermal Gloves
GUIDE 46W Winter Fleece Lined
Goat Leather Gloves
Ejendals 297 Thinsulate Leather
Waterproof Gloves
Product Code: 467330 Product Code: 467217 Product Code: 468286
• Made from durable synthetic leather
• PU Palm coated for excellent grip
• Hi-Vis yellow spandex back for excellent
visibility
• Fully lined for comfort and flexibility
• Cuff for added protection and coverage
• Waterproof membrane and fully winter
lined with a soft fleece
• Suitable for work outdoors in construction,
plant and crafts.
• Conforms to EN388 2.2.2.1, EN511 1.2.X
• Sizes 8-12
• Padded knuckles for good impact and
scratch protection
• High performance warm fleece lining
• Elasticated wrists for heat retention and a
secure fit
• Stretch textile back
• Reinforced index finger and fingertips
• Ergonomic fitting around the thumb
• EN388 2.1.2.1, EN511 0.2.X
• Sizes 8-11
• Winter-lined
• 0,7-0,8 mm
• Full grain goatskin
• Neoprene, Spandex, Thinsulate™
• 100g weight, Cat. II design
• Reinforced fingers and thumb
• Waterproof
• Velcro® wrist cuff fasteners for a tight fit
• Ideally for all-round work
• EN 388:2003, 2122 EN 511:2006, 120
• Sizes: 8-11
THERMAL COLD PROTECTION
HAND PROTECTION
EN511
Protection from the Cold
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 141 07/08/18 14:15:06
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Guide 6321 CPN 3/4 Dipped
Heavyweight Anti-Syringe Gloves
Guide 6401 CPN Hi-Vis Orange
Anti-Syringe Gloves
Guide 6502 CPN Heavyweight Offshore
Anti-Syringe Gloves
Guide 6501 CPN Black Leather Police Anti-Syringe
Gloves
Product Code: 461472 Product Code: 461473
Product Code: 461475Product Code: 461474
SPECIALIST - NEEDLE STICK GLOVES
• Superior cut and puncture protection
• Made of soft synthetic leather and additional PVC reinforcement
• Made for heavy industrial offshore and construction environments
• Pre-curved ergonomic fingers for an excellent fit
• Protects across the palm, fingers, finger tips and back of the hand
• Additional Thermoplastic on the knuckle and fingers for increased
mechanical protection
• Long design with a tight-fitting cuff
• Conforms to EN388 4.5.2.3 Category 2
• Sizes 8-11
• Excellent cut, puncture and needle protection
• Fully made of high grade goat leather
• Pre-shapes fingers and a tight yet dexterous index finger
• Kevlar lining on the back of the hand
• Palm and fingertips protected by Alycore technology that
protects the hand from sharp objects
• Typical applications: Police, guards and security where a risk of
cut or puncture injuries are present
• Conforms to EN388 4.5.3.3
• Size: 8-11
• Excellent Cut, puncture and needle protection
• Knuckle dipped in APG for extra protection
• 8/4 layer Alycore over inside of the hand and fingertips
• Protects the palm and the fingertips from needles and sharp
objects
• Typical applications: Heavy demanding applications where risks
of cuts and puncturing is present
• Liquid proof dipping
• Conforms to EN388 4.5.4.2, Category 2
• Sizes 8-11
• Excellent cut, puncture and needle protection
• Made of soft synthetic Leather
• Additional PVC reinforcement across the glove
• Alycore technology applied to the inside of the hand, palm and
fingertips and the very top of the fingertips from needles and sharp
objects
• Hi-Vis detail
• Pre-shaped fingers
• Typical applications: Demanding work where a risk of cuts and
puncture injuries are present
• Conforms to EN388 4.5.3.4
• Sizes: 8-11
HAND PROTECTION
MASTER FILE IDML 3.indd 142 07/08/18 14:15:16
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
Guide 6321 CPN 3/4 Dipped
Heavyweight Anti-Syringe Gloves
Guide 6401 CPN Hi-Vis Orange
Anti-Syringe Gloves
Guide 6502 CPN Heavyweight Offshore
Anti-Syringe Gloves
Guide 6501 CPN Black Leather Police Anti-Syringe
Gloves
Product Code: 461472 Product Code: 461473
Product Code: 461475Product Code: 461474
SPECIALIST - NEEDLE STICK GLOVES
• Superior cut and puncture protection
• Made of soft synthetic leather and additional PVC reinforcement
• Made for heavy industrial offshore and construction environments
• Pre-curved ergonomic fingers for an excellent fit
• Protects across the palm, fingers, finger tips and back of the hand
• Additional Thermoplastic on the knuckle and fingers for increased
mechanical protection
• Long design with a tight-fitting cuff
• Conforms to EN388 4.5.2.3 Category 2
• Sizes 8-11
• Excellent cut, puncture and needle protection
• Fully made of high grade goat leather
• Pre-shapes fingers and a tight yet dexterous index finger
• Kevlar lining on the back of the hand
• Palm and fingertips protected by Alycore technology that
protects the hand from sharp objects
• Typical applications: Police, guards and security where a risk of
cut or puncture injuries are present
• Conforms to EN388 4.5.3.3
• Size: 8-11
• Excellent Cut, puncture and needle protection
• Knuckle dipped in APG for extra protection
• 8/4 layer Alycore over inside of the hand and fingertips
• Protects the palm and the fingertips from needles and sharp
objects
• Typical applications: Heavy demanding applications where risks
of cuts and puncturing is present
• Liquid proof dipping
• Conforms to EN388 4.5.4.2, Category 2
• Sizes 8-11
• Excellent cut, puncture and needle protection
• Made of soft synthetic Leather
• Additional PVC reinforcement across the glove
• Alycore technology applied to the inside of the hand, palm and
fingertips and the very top of the fingertips from needles and sharp
objects
• Hi-Vis detail
• Pre-shaped fingers
• Typical applications: Demanding work where a risk of cuts and
puncture injuries are present
• Conforms to EN388 4.5.3.4
• Sizes: 8-11
HAND PROTECTION
MASTER FILE IDML 3.indd 142 07/08/18 14:15:16
143
Impacto 501-10 Anti-Impact Fingerless
Padded Palm Gloves
Impacto 523-24 Anti-Impact Double Padded
Fingerless Gloves
Impacto BGFITS Anti-Vibration Fitter’s Style Air Rigger Gloves
Product Code: 460828
Product Code: 463353
Product Code: 460829
• Contoured visco-elastic polymer (VEP) padding in the
palm protects from impact and vibration.
• Suede leather cover for abrasion protection.
• Ideal for when heavy machinery is being used
• Provides impact and abrasion protection
• Open finger for maximum dexterity
• Elasticated liner Nylon Lycra for a closer fitting and breathability
• Conforms to EN388 1.2.4.4
• Sizes 6-11
• Made of stretchy Nylon Lycra material offering optimum
breathability and comfort
• Contoured VEP 1/4” padding covering the palm to the wrist
and around to the edge of the hand
• Fingerless style for maximum dexterity
• Suede leather for excellent abrasion resistance
• Conforms to EN388 2.2.4.3 & EN420:2003 + A1:2009
• Sizes 6-10
• Palm and fingers made from soft pearl suede
• Provides vibration, impact and abrasion protection
• To be used with industrial drills, grinders of chipping hammers
• Cotton safety cuff for extra coverage
• Conforms to EN ISO 10819 and ANSI S2.73-2002 (R 2007) / ISO
10819:1996
• Available in sizes 8-10
Impacto specializes in improving worker safety and comfort by providing ergonomically designed personal
protective equipment to reduce impact, vibration and repetitive motion in any work environment.
The IMPACTO promise to provide high quality products and worker protection is a proven means of
reducing Worker’s Compensation costs and thus of significant value to your company.
Impact are also a ISO 9001:2000 Certified company as of 2002 providing you with confidence with every
Impacto product purchase.
SPECIALIST ANTI-VIBRATION GLOVES
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 143 07/08/18 14:15:34
Impacto 501-10 Anti-Impact Fingerless
Padded Palm Gloves
Impacto 523-24 Anti-Impact Double Padded
Fingerless Gloves
Impacto BGFITS Anti-Vibration Fitter’s Style Air Rigger Gloves
Product Code: 460828
Product Code: 463353
Product Code: 460829
• Contoured visco-elastic polymer (VEP) padding in the
palm protects from impact and vibration.
• Suede leather cover for abrasion protection.
• Ideal for when heavy machinery is being used
• Provides impact and abrasion protection
• Open finger for maximum dexterity
• Elasticated liner Nylon Lycra for a closer fitting and breathability
• Conforms to EN388 1.2.4.4
• Sizes 6-11
• Made of stretchy Nylon Lycra material offering optimum
breathability and comfort
• Contoured VEP 1/4” padding covering the palm to the wrist
and around to the edge of the hand
• Fingerless style for maximum dexterity
• Suede leather for excellent abrasion resistance
• Conforms to EN388 2.2.4.3 & EN420:2003 + A1:2009
• Sizes 6-10
• Palm and fingers made from soft pearl suede
• Provides vibration, impact and abrasion protection
• To be used with industrial drills, grinders of chipping hammers
• Cotton safety cuff for extra coverage
• Conforms to EN ISO 10819 and ANSI S2.73-2002 (R 2007) / ISO
10819:1996
• Available in sizes 8-10
Impacto specializes in improving worker safety and comfort by providing ergonomically designed personal
protective equipment to reduce impact, vibration and repetitive motion in any work environment.
The IMPACTO promise to provide high quality products and worker protection is a proven means of
reducing Worker’s Compensation costs and thus of significant value to your company.
Impact are also a ISO 9001:2000 Certified company as of 2002 providing you with confidence with every
Impacto product purchase.
SPECIALIST ANTI-VIBRATION GLOVES
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 143 07/08/18 14:15:34
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
• Designed to help prevent wrist Repetitive Strain Injuries (RSI) such
as Carpal Tunnel Syndrome (CTS) or Tendonitis
• Multi-layered design with reinforced stitching for durability
• Breathable lining wicks away moisture build-up and prevents skin
irritation
• The non-porous rubberised material allows the body heat to be
captured, this in-tern increases blood circulation and provides
increased compression and support for its user.
• Outer fabric made from durable nylon for longer lasting
performance
• Sizes for wrist support: Compatible with 4” to 11” wrist sizes
• For use when vibration is being transmitted by power tools
• Soft anti-slip surface
• Can be customized with open or closed handles
• VEP Padding absorbs up to 500% more shock than foam of the
same thickness
• Can be used in singular areas or a combination: fingers, back of
hand, web area and thumb
• Allows a great amount of flexibility and control yet retaining its
excellent shock absorption ability
• Kit includes waffle Visco-elastic polymer sheet and self-adhesive
silicone rubber tape
• CE compliant
• Sizes: One size
Product Code: 463683
Product Code: 469222 -9067 - VEP material 13” x 5”
sheet, 1/8 inch thick.
Product Code: 469221 -9065 - VEP material 13” x 5”
sheet, 3/16 inch thick
Impacto TS226 Thermal Wrist Support Wrap Impacto 9065/9067 Anti-Vibration Grip Wrap
SPECIALIST - ANTI-VIBRATION GLOVES + WRAPS
• Made from synthetic ultra-suede leather
• Textured silicone dotted grip
• Provides excellent breathability
• Adjustable wrist fastening
• The durable air bladder protects the palm
fingers and thumb
• Highly dexterous
• For use with disc cutters, hammer drills and
chipping hammers
• Conforms to EN 10819:1996, EN 388:2003
2.2.2.2, EN 420:2003
• Sizes: 7-11
Product Code: 460850
Impacto BG408 Mechanics Style Anti-Vibration Air Gloves
HAND PROTECTION
MASTER FILE IDML 3.indd 144 07/08/18 14:15:53
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
• Designed to help prevent wrist Repetitive Strain Injuries (RSI) such
as Carpal Tunnel Syndrome (CTS) or Tendonitis
• Multi-layered design with reinforced stitching for durability
• Breathable lining wicks away moisture build-up and prevents skin
irritation
• The non-porous rubberised material allows the body heat to be
captured, this in-tern increases blood circulation and provides
increased compression and support for its user.
• Outer fabric made from durable nylon for longer lasting
performance
• Sizes for wrist support: Compatible with 4” to 11” wrist sizes
• For use when vibration is being transmitted by power tools
• Soft anti-slip surface
• Can be customized with open or closed handles
• VEP Padding absorbs up to 500% more shock than foam of the
same thickness
• Can be used in singular areas or a combination: fingers, back of
hand, web area and thumb
• Allows a great amount of flexibility and control yet retaining its
excellent shock absorption ability
• Kit includes waffle Visco-elastic polymer sheet and self-adhesive
silicone rubber tape
• CE compliant
• Sizes: One size
Product Code: 463683
Product Code: 469222 -9067 - VEP material 13” x 5”
sheet, 1/8 inch thick.
Product Code: 469221 -9065 - VEP material 13” x 5”
sheet, 3/16 inch thick
Impacto TS226 Thermal Wrist Support Wrap Impacto 9065/9067 Anti-Vibration Grip Wrap
SPECIALIST - ANTI-VIBRATION GLOVES + WRAPS
• Made from synthetic ultra-suede leather
• Textured silicone dotted grip
• Provides excellent breathability
• Adjustable wrist fastening
• The durable air bladder protects the palm
fingers and thumb
• Highly dexterous
• For use with disc cutters, hammer drills and
chipping hammers
• Conforms to EN 10819:1996, EN 388:2003
2.2.2.2, EN 420:2003
• Sizes: 7-11
Product Code: 460850
Impacto BG408 Mechanics Style Anti-Vibration Air Gloves
HAND PROTECTION
MASTER FILE IDML 3.indd 144 07/08/18 14:15:53
145
tegera pro 9180
Anti-Vibration Gloves
• Chrome free
• Reinforced index finger, seams and fingertips for increasing product strength
• Padded palm
• Pre-curved fingers for a tight and comfortable fit
• Individually designed thumb
• Short design version
• Ergonomically shaped for easy donning and a secure fit
• Protects from abrasions, cuts, dirt or scrapes
• Conforms to EN388 0.2.2.2, EN ISO 10819 Category 2 design
• Sizes 7-12
PRODUCT CODE: 462556
• Automotive industry
• Heavy machinery & equipment
• Mining
• Construction
Typical Applications:
Features
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 145 07/08/18 14:16:07
tegera pro 9180
Anti-Vibration Gloves
• Chrome free
• Reinforced index finger, seams and fingertips for increasing product strength
• Padded palm
• Pre-curved fingers for a tight and comfortable fit
• Individually designed thumb
• Short design version
• Ergonomically shaped for easy donning and a secure fit
• Protects from abrasions, cuts, dirt or scrapes
• Conforms to EN388 0.2.2.2, EN ISO 10819 Category 2 design
• Sizes 7-12
PRODUCT CODE: 462556
• Automotive industry
• Heavy machinery & equipment
• Mining
• Construction
Typical Applications:
Features
HAND PROTECTION
EN388:2016 4.4.1.1.E.P
Abrasion (0-4) Tear (0-4)
ISO 13997 (A-F)
Impact (Pass/Fail)
Cut (0-5) Puncture (0-4)
MASTER FILE IDML 3.indd 145 07/08/18 14:16:07
www.guardsmanltd.co.uk
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
tegera 951
®
Chainsaw Gloves
Features
Typical Applications
• Ejendals Tegera 951 Chainsaw
Gloves are medium leather work
gloves.
• Provides chainsaw protection in
both the left and right hand.
• With pre-curved fingers
• Reinforced in key areas
• Highly flexible and dexterous
and versatile enough to be used
across various industries.
• Yellow hi-vis design to ensure
good visibility during chainsaw
work.
• They feature a secure Velcro
fastening for an easy and
comfortable fit.
• EN 388:2003, 3.1.2.2 EN 381-7:1999,
Class 1 20 M/S Design A
• Sizes: 8-11
• Agriculture
• Building & Construction
• Forestry
• Service
• Utilities
PRODUCT CODE: 467848
SPECIALIST - CHAINSAW GLOVES
HAND PROTECTION
MASTER FILE IDML 3.indd 146 07/08/18 14:16:15
0116 253 56 88 - End-user
0116 253 35 98 - Wholesale
[email protected]
[email protected]
tegera 951
®
Chainsaw Gloves
Features
Typical Applications
• Ejendals Tegera 951 Chainsaw
Gloves are medium leather work
gloves.
• Provides chainsaw protection in
both the left and right hand.
• With pre-curved fingers
• Reinforced in key areas
• Highly flexible and dexterous
and versatile enough to be used
across various industries.
• Yellow hi-vis design to ensure
good visibility during chainsaw
work.
• They feature a secure Velcro
fastening for an easy and
comfortable fit.
• EN 388:2003, 3.1.2.2 EN 381-7:1999,
Class 1 20 M/S Design A
• Sizes: 8-11
• Agriculture
• Building & Construction
• Forestry
• Service
• Utilities
PRODUCT CODE: 467848
SPECIALIST - CHAINSAW GLOVES
HAND PROTECTION
MASTER FILE IDML 3.indd 146 07/08/18 14:16:15
Categories
HealthcareDownload
Download Slideshow Get the original presentation fileQuick Actions
Statistics
- Views 824
- Slides 42
- Favorites 1
- Age 2652 days
Related Slideshows
36
Clinical approach Dyspnoea A simple and practical approach.pptx
ShajahanPS
40 views
238
Cancer Awareness therapy for public by Dr Kanhu Charan Patro
kanhucpatro
38 views
41
Prof Satyadas Memorial oration Kozhikode.pptx
ShajahanPS
35 views
26
Viral Conjunctivitis and it;s managment.pptx
ZaidAzhar
47 views
30
Essential Thrombocythemia 15 Years of Experience at the Hematology Department, Algies, Algeria.pdf
sbelakehal
41 views
10
Hypertension sign symptoms cmdt style with regime
androiddabest
42 views