Instrumentation Engineer Resume

Inst Engg Resume

1. Curriculum Vitae
Control & Instrumentation Engineer
Prashant Kumar

Mob.: [phone]
Email: [email protected]


Career Objective

I am looking for a good position in the field of instruments and automation in a prestigious company
where previous skills and capabilities can be put to efficient use. I possess effective organizational skills
and the ability to supervise a team and develop the final output.


Personal Details

Profile: Male, 35, UnMarried, Indian, Hindu
Current Position: Site-Incharge(Project Manager)
Current Location: New Mumbai-Maharashtra
Passport: L166076

Summary of Skills:

 About 10 years of experience as an instrumentation and control engineer in Erection,
Installation,Pre-commissioning, maintenance, commissioning and development co-ordination of
instruments and control systems in Petrochemicals,Refinery,Power Plant,Cement Plant,Water
Treatment Plant projects.
 Knowledge of Configuring and faults diagnosis of DCS, PLC, SCADA, RTU, Profibus
Communication, Analyzers and Control Loops.
 Installation, calibration and loop checking of the field instruments ( Emerson Rosemount, ABB,
Endress & Hauser, Bently Nevada, Honeywell, Yokogawa, Vega, Polysonics,.......)
 Maintenance and calibration of the control valves ( Pneumatic, Part turn, MOV, NRV,..... ) of Weir
Blackborough, Flowserv, Bray, Airtorque, Copes-Vulcan, Valtek, Masoneilan, Auma matic,......
 Experienced in flowmeters configuring (electromagnetic, orifice plate, ultrasonic, turbine, variable
area )
 Designing, Implementing and Commissioning of new control loops as per site requirements.
 Review of control philosophy, P&I diagrams, cause & effect diagrams, instruments list, flow chart
 Familiar with engineering standards ISA, IEEE, ASTM, NAMUR, ASMI , ANSI , NEMA , IEC
 Knowledge of Preparing master data sheet for PM schedule; ensuring safe and efficient
performing of CM
 Technical Support for the instrumentation team.
 Experienced in the field instruments and control systems procurement activities
 Spares balance investigation and inventory control for all instruments’ spare parts
 Excellent communication interpersonal skills.


Page 1 of 4

2. Educational Qualifications:

1995…….10
th
…..CBSE BOARD….FIRST CLASS
1997…….12
th
…..CBSE BOARD….FIRST CLASS
2002........ Bachelor of Engineering in Instrumentation & Control, Pune university.........
Organizational Experience

Organization: Doshi Ion Exchange & Chemical Industries Limited,Ahmedabad
Duration: July 2004 to Feb 2009
Designation: Erection & Commissioning Engineer
Project Description: Water Treatment Plants at
 Deepak Fertilizers & Petrochemical corporation Ltd.MIDC Taloja, Maharashtra,
 Indira Gandhi Center for atomic Research, Kalpakkam Tamil Nadu,
 Abhishek Industries Limited., Barnala, Punjab
 Reliance Industires Limited,Glycol Division,Kurkumbh,Maharashtra
Responsibilities:
 Leading a team of instrument technicians
 Reporting periodically to Maintenance Manager; preparing KPI, PM and CM reports.
 Troubleshooting the totally integrated automation TIA from Allen Bradely.
 Planning required upgradation for instruments to achieve production quality and cost minimizing.
 Installation,Maintenance and calibration of pneumatic control valves
 Installation & Maintenance and calibration of different analyzers,PH,Conductivity.
 Installation & Maintenance and calibration of flowmeters ( electromagnetic, orifice plate, variable
area, turbine, ultrasonic..... )
 Installation,Maintenance and calibration of transmitters PT, LT, TT, Calibrating and adjusting the
dosing pumps (Prominent)
 Ensure Spares balance and inventory control for all instruments’ spare parts
 Assisting Maintenance manager in troubleshooting of PLC & DCS Systems.

* * * * * * * * * * * * * * * * * * *

Organization: Rohini Industrial Electricals Limited,Mumbai
Duration: Feb ’2009 to September ‘2010
Designation: Senior Engineer-Instrumentation
Project Description:
 Electrical & Instrumentation Erection and Pre-commissioning of Cement Plant at Grasim
Industries Limited, Cement Division, Aligarh, UP
 Revamping of Naptha Cracker Unit and Auxillary Naptha Cracker Unit at Haldia Petrochemicals
Limited, West Bengal(Instrumentation Part).
Responsibilities:
 Coordinating daily maintenace activities like preventive , predictive and breakdown.
 Planing and executing Shutdown jobs.
 Spare planing and purchasing.
 Calibration of Instruments, SAP Calibration and maintaining ISO doccuments.
 Coodinating With Contractors for Migration Works and new Schemes.
 Troubleshooting of PLC system ( Siemens simatic S7 300 ) and faults diagnosis .
 Calibrating of weighting systems including load cell 15 ton capacity
 Involved in Instrument Installation,Calibration,Cable Laying,Trmination,Calibration and Loop
Checking
 Planning and implementing additional control loops as per site requirements
 Strong background in motor defects, softstarters, drives, star/delta starters, VFD, MCC
Page 2 of 4

3. * * * * * * * * * * * * * * * * * * * * * *

Organization: Offshore Infrastructures Limited, Mumbai
Duration: Sep 2010 to Nov, 2011
Designation: Assistant Manager-Electrical & Instrumentation
Project Description:
 Crude Oil Terminal at Mundra, Gujarat. for Hindustan-Mittal Energy Limited.
 Crude Distillation Unit & Vacumm Distillation Unit at Guru Gibind Singh
Refinary,Bathinda, Punjab.
Responsibilities:
 Heading a team of engineers
 Handling Calibration and Loop Checking of Instruments
 Co-ordination with client, consultant, contractor throughout the entire Projects development
phase, Attending meetings. Coordinates with operations and safety personnel to obtain work
permit for planned work to be carried out during Commissioning Stage.
 Read and interpret drawings extracting relevant instrument engineering information required for
Erection, Installation, Pre – comissioning and Commissioning.

* * * * * * * * * * * * * * * * * * *

Organization: ANI Instruments Private Limited,Mumbai
Duration: Dec 2011 to Jan 2013
Designation: Instrumentation Engineer(Deputed to Invensys India Private Limited)
Project Description:
 2 X 500 MW Phase-III,Thermal Power Plant,National Thermal Power Corporation limited.
Responsibilities:
 Team Leader for the Site-Erection and Pre-commissioning Team
 Erection of Marshalling Panels in Main Control Room and Sub-Control Rooms
 Erection of Instrument Panels at different elevation for Boiler and Steam turbine Generaters.
 Guiding to Contractors’s Supervisors for executing the work in Planned and systematic way.
 Co-ordination with client, consultant, contractor throughout the entire Projects development
phase, Attending meetings. Coordinates with operations and safety personnel to obtain work
permit for planned work to be carried out during Pre-Commissioning Stage.
 Read and interpret drawings extracting relevant instrument engineering information required for
Erection, Installation, Pre – comissioning and Assisting the Client in Commissioning activities.

* * * * * * * * * * * * * * * * * * *

Organization: Konstelec Engineers Private Limited,Mumbai,
Duration: Feb ’ 2013 to March’2015
Designation: Site-incharge (Electrical & Instrumentation) and Billing & Planning Engineer
Project Description:
 Implementation of MBLAL Recommendation pkg-1 at HPCL-Hassan terminal.
 Instrumentation Works for PFCCU & PPU at MRPL Mangalore
Responsibilities:
 Erection and Installation of cable tray supports,cable tray,Hume pipe ,GI pipe.
 Erection of DB,s and Panels in Field.
 Erection of HT & LT panels in MCC Room and respective cable laying.
 Assisting client in Charging of Panels and Commissioning of Air-Compressor and Fire Water
pump House diseal Engines.
 Accompanying contractors supervisor and site visits, review drawings/Specifications,
scheduling/assigning work.
Page 3 of 4

4.  Monitoring work progress and ensuring quality work. Reports on proper completion of jobs for
the preparation of work completion certificates and verification,Billing and Planning.
 Erection and Installation of impulse pipes, junction boxes, cable trays, cable ducts, conduits,
control room panels, laying of cables and installation of various field instruments.
 Calibration of instruments such as transmitters, switches, temperature elements, pressure
Gaugese etc.
 Accompanying contractors supervisor and site visits, review drawings/Specifications,
scheduling/assigning work to the instruments personnel.
 Monitoring work progress and ensuring quality work. Reports on proper completion of jobs for
the preparation of work completion certificates and verification,Billing and Planning.

* * * * * * * * * * * * * * * * * * *

Organization: Anntech Offshore Engineering Private Limited,Navi Mumbai
Duration: April’2015 to as on date.
Designation: Site-incharge (Electrical & Instrumentation)
Project Description: E&I Works for 3X110TPH HRSG Boiler at BPCL,Kochi,Kerala
Responsibilities:
 Installation and Commissioning of Instrument and Systems.
 Inspection of items supplied by the customer.
 Installation of cable duct / tray, junction boxes and air distribution boxes, instruments with
Supports, main air piping, control panels, marshalling racks and DCS, consoles and related
auxiliary activities.
 Testing of cables, Main / branch cable laying and terminations.
 Impulse piping and tubing.
 Calibration of instruments, Loop checking.
 Pressure testing of impulse piping / tubing.
 Assistance in commissioning.

Languages

English: Fluent; read, write and speak
Hindi : Mother tongue

Availability

Earliest start date: Given 3 weeks notice







__________________________________________________________________________________________________ ________________
Declaration
I hereby declare that all information stated above are true to the best of my knowledge.






Date: Place:



Page 4 of 4