Insulating mats for electrical purposes is

INSULATING MATS FOR ELECTRICAL PURPOSES IS:15652/2006

(With Latest Amendments)

Safety Insulation Mats as per IS:15652 Superseding IS:5424/69 was introduced in the the year 2007,
with the view of technical advancement & more stringent Industrial safety parameters. Insulating
mats safeguard life of Electricians & other Technicians, in case of any accidental current leakage
while working on AC or DC installations. Synthetic Insulation mat confirms complete safety of
workers handling Live electronic equipments.

Application:
• Near HT & LT Control Panels,
• In Front of Switchboards,
• Power Transmission Rooms, Sub Stations,
• Around Buss-Bars.
• Indoor or Outdoor portable protection element for site engineers working on live equipment.
Material Composition:
Made of Dielectric “Elastomer” which possess elastic properties and may be natural or synthetic in nature. Typically a combination of rubber & Synthetic Polymers.

Classification:
Safety Mats for Electrical Applications are divided in to three main classes based on Voltage Ratings. Recommended division is as follows:

1. INSULATING MATS FOR ELECTRICAL PURPOSES IS:15652/2006

(With Latest Amendments)

Safety Insulation Mats as per IS:15652 Superseding IS:5424/69 was introduced in the the year 2007,
with the view of technical advancement & more stringent Industrial safety parameters. Insulating
mats safeguard life of Electricians & other Technicians, in case of any accidental current leakage
while working on AC or DC installations. Synthetic Insulation mat confirms complete safety of
workers handling Live electronic equipments.

Application:
 Near HT & LT Control Panels,
 In Front of Switchboards,
 Power Transmission Rooms, Sub Stations,
 Around Buss-Bars.
 Indoor or Outdoor portable protection element for site engineers working on live equipment.
Material Composition:
Made of Dielectric “Elastomer” which possess elastic properties and may be natural or synthetic in nature.
Typically a combination of rubber & Synthetic Polymers.

Classification:
Safety Mats for Electrical Applications are divided in to three main classes based on Voltage Ratings.
Recommended division is as follows:
VOLTAGE RATINGS
Class Thickness Working Voltage Proof voltage Break Down Voltage
A 2.0 mm 3.3KV 10KV 30 KV
B 2.5 mm 11KV 22KV 45 KV
C 3.0 mm 33KV 36KV 65 KV


Working Temperature :
Under Normal conditions physical, mechanical & Electrical properties remain intact for temperate ranging from -
10°C to +60°C.

2. Workmanship & Finish:
Each Meter of Mat should be free from all type of harmful physical irregularities such as pinholes, cracks, blisters,
cuts, conductive embedded foreign matter, creases, pinch marks, voids, entrapped air and prominent ripples.

Silent Features of Electrical Insulating Mat As Per IS:15652-2006 :-
1. Withstands voltages up to 65kV ac and 240V dc.
2. Every Meter of Mat Tested & Stamped to IS:15652-06 specification with ISI marking.
3. Electrical Resistance up to 1494000 Mega Ohm.
4. Fire Retardant, fire self-extinguish within 5 seconds of lighting.
5. High Elongation & Tensile Strength. No tear or breakage due to Trolley movement & Foot Traffic.
6. Resistant to Acids, Alkalis, Solvent and transformer Oil normally associated with Electronic Industry.
7. Paste-able type can be easily pasted/Installed on floor, if required.
8. Water & moisture proof.
9. Approved with leading Electronic Instrument testing Institutions like ERDA, CPRI, BIS.