Introducing Bumper Cranes

Details on each model of bumper crane showing what type of truck or van it up-fits to. Also showing options available on which bumper crane model

1. Sto-away Power Cranes, Inc.»
STO-AWAYs IS THE RIGHT CHOICE.

2. Introducing

Bumper

Cranes

4. Save time. Save fuel

9. Heavy Duty Bumper

10. Trailer Towing Packages

11. SX NO One can say that

AS they are OSHA certified.

OSHA compliant,

13. SR2A,SR2B,&SR2C
Bumper Cranes
u for Cargo Vans

The listed bumper cranes above
shall come standard with Metallic
Gray Powder Coat. Can be
requested to be Powder Coated
Black.

15. S R3, & SR 4 Bumper Cranes

16. SR5A € SR5T Bumper Cranes

1500# - 2000# capacity units.
These bumper cranes will bolt on and fit full size Chevy
C/K series; Ford "F" series; Dodge Ram and Nissan
Titan and Sprinter Van with a standard bed of an
approximate width of 77".

18. SR7 Bumper Crane

20. ONLY Upon Request on the following
Bumper Cranes:

21. Upon Request Only for ANY of the
Bumper Cranes:
{ 4 |

STANDARD REVERSED

22. THE OPTIONAL LED BACKUP LIGHTS & LED TAIL LIGHTS -
WILL NEED TO BE REQUESTED AND ORDERED.

LED BACKUP LIGHTS &
LED TAIL LIGHTS

23. The Standard Bumper

Cranes will be limited to
270 degrees in order to
protect both the interior
and the exterior walls of
the truck's bed/service
body.

24. Standard Features on the

Sto-away Power Cranes ®

NEW COATING PROCESS APPLIED

25. RECEIVER HITCH

SR2A, SR3, SR4 Series

SR2B-C, SR 5 - SR6, CSR 515-520, CSR 615-620 Series

SR7 - SR8, CSR725 Series

26. FEATHER LITE KIT- IS A STANDARD
FEATURE ONLY ON THE SR7 8. SR8 Series
Bumper Cranes.

This option is a nitrogen cylinder assist that is
placed on the boom, and the bumper to allow the
crane to softly glide down in to the bumper,
instead of slamming down. It also makes the
crane and the boom easier to lift.

27. Brackets to up fit to the truck, wiring harness, all mounting
hardware, owners manual with install, operation, safety, parts, &
maintenance instructio

We have a twin inner core that keeps our cable from jumping off of
the pulley at the top of our boom.

We also use 3m reflective logos so they are visible at night time.

28. Water Tight Control Plug and Dust Cap

| EMERGENCY STOP

(af fe he lh

À PRESS BUTTON TO À
KILL WINCH'S POWER 4

30. Plastic Hand Control

All Sto-away ®
Bumper Cranes come
standard with a hand

control.

32. Two Boom Heights Settings

33. SR2A, SR3, SR4 Series

SR2B-C, SR 5 - SR6,
CSR 515-520, CSR 615-620
SR7 - SR8, CSR725 Series

36. A hole cut into the face plate to accept the 7
pin trailer plug.

37. OPTIONS

THAT

AVAILABLE

38. B.L.G.L. Winch

This option is a key Safety option that assure
positive cable attachment to a 3200 Ib. Minimum
payload at the maximum extended cable reach for
Below Level Ground Lifting more than 5 feet
beneath the truck.

40. ¡This option is a steel locking lid and
bottom panels that encloses the
bumper frame and protects the
Winch drives from anything that
might come up from your wheels of
your truck or van

Pictured left to right:

Ñ

All of the Lid Top Covers are designed to pad
lock in order to have limited access to the
crane. This protects You from unqualified

personnel using the crane

41. Rubber Hand Control

UPGRADE FROM
PLASTIC HAND
CONTROL WHICH IS
STANDARD FOR ALL
UNITS

43. This option is a
nitrogen cylinder
assist that is placed
on the boom, and the
bumper to allow the

crane to softly glide
down in to the
bumper, instead of
slamming down. It
also makes the crane
and the boom easier
to lift.

44. This option will enable the operator to lock the
crane into place every 22 % degrees throughout

its rotation and stay locked in position until the
lever is shifted and the operator has taken
control of the load.

45. ALUMINUM BOOM EXTENSION

46. You can order later if needed.
Except on
SR2A, SR3, SR4

47. 3 Auxiliary Winch System
to choose from. Reach 90
feet from the bumper with
a Single line stall rating of
3300 Ib., 4200 Ib., &

6000 Ib. without the aid of
any pulley snatch blocks

This winch drive is

independent of the hoist

and come with a
freewheeling clutch lever

as standard equipment.

49. D Rings(Safety Chain-Towing)

50. Tail & Backup Lighting Kit is a Factory installed
Stop / Tail and Backup lights placed in the face of the
bumper. Great for walk-in van bodies and added

visibility for Road Crews.

55. 42 X 7 FOLDING PLATFORM STEP

56. 40-48 SLIDE IN STRUT GRIP STEP
SLIDES IN UNDER BUMPER CRANE

58. 36" X 7" HINGED STEP STRUT
GRIP - 2 ELEVATIONS

U

59. Please contact us and let us know
what your application is calling for.

800-622-9797
Fax: [phone]
[email protected]
www.stoaway.com

60. Confined Space / Man Lift Rescue

61. Confined Space / Man Lift Rescue

62. Features that are included to only the:

W.R. Kit *: This feature is a steel locking lid and bottom panels that encloses the bumper frame and
protects the winch drives from anything that might come up from your wheels of your truck.

Posi-Lock Mast: This feature will enable the operator to lock the crane into place every 22 % degrees
throughout its rotation and stay locked in position until the lever is shifted and the operator has taken control
of the load.

B.L.G.L. Winch: This feature is needed for doing ANY below ground lifting. We prepare the winch to have
a positive cable attachment if you were to get to the last wrap of cable it would do a reverse wrap and will
not come off the drum

FEATHER LITE KIT: This feature is a nitrogen cylinder assist that is placed on the boom, and the bumper
to allow the crane to softly glide down in to the bumper, instead of slamming down. It also makes the crane
and the boom easier to lift

CAM LOCK OUTRIGGER LEG: (OPTIONAL LEG FOR EXTRA STABILITY)

Third Boom Setting: This feature shall allow an approximate maximum boom height to a standard crane.

63. Confined Space / Man Lift Rescue
Optional CSR SET UP: Packages:

64. OSHA certifies NOTHING.

They are a regulatory branch of the federal government. OSHA sets the minimum
standards that must be meant for occupational health and safety in work places
within the United States. OSHA can and will fine a company and may shut down the
company if they do not meet these standards.

Since OSHA doesn't certify equipment; NO One can say that they are OSHA
certified.

What they can say is that their equipment and /or procedures is OSHA compliant,
and state what regulation standards they meet.

OSHA clearly states that NO CRANE can be used to lift personnel, it doesn't matter
if it is powered or a manual hand crank, Period. Cranes have no safe guards for
protecting the worker from being pulled apart. Without a load limiting system on the
hoist you can't use it. It only makes sense; a crane is designed to lift to its maximum
capacity and nothing less.

67. I would like to explain how STO-AWAY POWER CRANE'S are different from the rest for
RESCUE, and CONFINED SPACE applications.

68. www.stoaway.com.