Lam config-131007234330-phpapp01
879 views
23 slides
Jun 05, 2021
Slide 1 of 23
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
About This Presentation
Linear Asset Management Configuration Guide
Slide Content
EHP6 for SAP ERP
6.0
July 2012
English
Linear Asset Management
(D49)
SAP AG
Dietmar-Hopp-Allee 16
69190 Walldorf
Germany
Building Block Configuration Guide
6.0
July 2012
English
Linear Asset Management
(D49)
SAP AG
Dietmar-Hopp-Allee 16
69190 Walldorf
Germany
Building Block Configuration Guide
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Copyright
© 2012 SAP AG. All rights reserved.
SAP, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign, SAP BusinessObjects Explorer,
StreamWork, SAP HANA, and other SAP products and services mentioned herein as well as their
respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.
Business Objects and the Business Objects logo, BusinessObjects, Crystal Reports, Crystal Decisions,
Web Intelligence, Xcelsius, and other Business Objects products and services mentioned herein as well
as their respective logos are trademarks or registered trademarks of Business Objects Software Ltd.
Business Objects is an SAP company.
Sybase and Adaptive Server, iAnywhere, Sybase 365, SQL Anywhere, and other Sybase products and
services mentioned herein as well as their respective logos are trademarks or registered trademarks of
Sybase Inc. Sybase is an SAP company.
Crossgate, m@gic EDDY, B2B 360°, and B2B 360° Services are registered trademarks of Crossgate
AG in Germany and other countries. Crossgate is an SAP company.
All other product and service names mentioned are the trademarks of their respective companies. Data
contained in this document serves informational purposes only. National product specifications may
vary.
These materials are subject to change without notice. These materials are provided by SAP AG and its
affiliated companies ("SAP Group") for informational purposes only, without representation or warranty
of any kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The
only warranties for SAP Group products and services are those that are set forth in the express
warranty statements accompanying such products and services, if any. Nothing herein should be
construed as constituting an additional warranty.
© SAP AG Page 2 of 23
Copyright
© 2012 SAP AG. All rights reserved.
SAP, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign, SAP BusinessObjects Explorer,
StreamWork, SAP HANA, and other SAP products and services mentioned herein as well as their
respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.
Business Objects and the Business Objects logo, BusinessObjects, Crystal Reports, Crystal Decisions,
Web Intelligence, Xcelsius, and other Business Objects products and services mentioned herein as well
as their respective logos are trademarks or registered trademarks of Business Objects Software Ltd.
Business Objects is an SAP company.
Sybase and Adaptive Server, iAnywhere, Sybase 365, SQL Anywhere, and other Sybase products and
services mentioned herein as well as their respective logos are trademarks or registered trademarks of
Sybase Inc. Sybase is an SAP company.
Crossgate, m@gic EDDY, B2B 360°, and B2B 360° Services are registered trademarks of Crossgate
AG in Germany and other countries. Crossgate is an SAP company.
All other product and service names mentioned are the trademarks of their respective companies. Data
contained in this document serves informational purposes only. National product specifications may
vary.
These materials are subject to change without notice. These materials are provided by SAP AG and its
affiliated companies ("SAP Group") for informational purposes only, without representation or warranty
of any kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The
only warranties for SAP Group products and services are those that are set forth in the express
warranty statements accompanying such products and services, if any. Nothing herein should be
construed as constituting an additional warranty.
© SAP AG Page 2 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Icons
Icon Meaning
Caution
Example
Note
Recommendation
Syntax
Typographic Conventions
Type Style Description
Example text Words or characters that appear on the screen. These include field
names, screen titles, pushbuttons as well as menu names, paths and
options.
Cross-references to other documentation.
Example text Emphasized words or phrases in body text, titles of graphics and tables.
EXAMPLE TEXT Names of elements in the system. These include report names,
program names, transaction codes, table names, and individual key
words of a programming language, when surrounded by body text, for
example, SELECT and INCLUDE.
Example text Screen output. This includes file and directory names and their paths,
messages, source code, names of variables and parameters as well as
names of installation, upgrade and database tools.
EXAMPLE TEXT
Keys on the keyboard, for example, function keys (such as F2) or the
ENTER key.
Example text Exact user entry. These are words or characters that you enter in the
system exactly as they appear in the documentation.
<Example text> Variable user entry. Pointed brackets indicate that you replace these
words and characters with appropriate entries.
© SAP AG Page 3 of 23
Icons
Icon Meaning
Caution
Example
Note
Recommendation
Syntax
Typographic Conventions
Type Style Description
Example text Words or characters that appear on the screen. These include field
names, screen titles, pushbuttons as well as menu names, paths and
options.
Cross-references to other documentation.
Example text Emphasized words or phrases in body text, titles of graphics and tables.
EXAMPLE TEXT Names of elements in the system. These include report names,
program names, transaction codes, table names, and individual key
words of a programming language, when surrounded by body text, for
example, SELECT and INCLUDE.
Example text Screen output. This includes file and directory names and their paths,
messages, source code, names of variables and parameters as well as
names of installation, upgrade and database tools.
EXAMPLE TEXT
Keys on the keyboard, for example, function keys (such as F2) or the
ENTER key.
Example text Exact user entry. These are words or characters that you enter in the
system exactly as they appear in the documentation.
<Example text> Variable user entry. Pointed brackets indicate that you replace these
words and characters with appropriate entries.
© SAP AG Page 3 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Contents
Linear Asset Management.......................................................................................................5
1 Purpose..................................................................................................................................5
2 Preparation............................................................................................................................5
2.1 Prerequisites...................................................................................................................5
3 Configuration..........................................................................................................................5
3.1 Defining LRP Type..........................................................................................................5
3.2 Defining Organizational Area...........................................................................................6
3.3 Setting View Profiles........................................................................................................6
3.4 Defining Category of Function Location...........................................................................8
3.5 Maintaining Equipment Categories..................................................................................8
3.6 Defining Change Documents, Collective Purchase Requisition......................................9
3.7 Defining Default Rules for LAM Notification Items.........................................................10
3.8 Changing UOM..............................................................................................................10
3.9 Defining Network Types................................................................................................11
3.10 Defining Network Group..............................................................................................12
3.11 Defining Node Type for Object Link From / To............................................................12
3.12 Adding Medium Types.................................................................................................13
4 Master Data.........................................................................................................................14
4.1 Creating Characteristics (Num).....................................................................................14
4.2 Creating Characteristics (Char).....................................................................................15
4.3 Creating Classes and assign Characteristics................................................................16
4.4 Creating Linear Reference Patters................................................................................17
4.5 Creating Function Location............................................................................................18
4.6 Adding Classification View for Function Location..........................................................18
4.7 Changing Function Location of Classification View.......................................................18
4.8 Changing Function Location of Linear Data View..........................................................19
4.9 Creating Equipment.......................................................................................................21
4.10 Changing Linear Reference Pattern............................................................................21
4.11 Creating Networks.......................................................................................................22
© SAP AG Page 4 of 23
Contents
Linear Asset Management.......................................................................................................5
1 Purpose..................................................................................................................................5
2 Preparation............................................................................................................................5
2.1 Prerequisites...................................................................................................................5
3 Configuration..........................................................................................................................5
3.1 Defining LRP Type..........................................................................................................5
3.2 Defining Organizational Area...........................................................................................6
3.3 Setting View Profiles........................................................................................................6
3.4 Defining Category of Function Location...........................................................................8
3.5 Maintaining Equipment Categories..................................................................................8
3.6 Defining Change Documents, Collective Purchase Requisition......................................9
3.7 Defining Default Rules for LAM Notification Items.........................................................10
3.8 Changing UOM..............................................................................................................10
3.9 Defining Network Types................................................................................................11
3.10 Defining Network Group..............................................................................................12
3.11 Defining Node Type for Object Link From / To............................................................12
3.12 Adding Medium Types.................................................................................................13
4 Master Data.........................................................................................................................14
4.1 Creating Characteristics (Num).....................................................................................14
4.2 Creating Characteristics (Char).....................................................................................15
4.3 Creating Classes and assign Characteristics................................................................16
4.4 Creating Linear Reference Patters................................................................................17
4.5 Creating Function Location............................................................................................18
4.6 Adding Classification View for Function Location..........................................................18
4.7 Changing Function Location of Classification View.......................................................18
4.8 Changing Function Location of Linear Data View..........................................................19
4.9 Creating Equipment.......................................................................................................21
4.10 Changing Linear Reference Pattern............................................................................21
4.11 Creating Networks.......................................................................................................22
© SAP AG Page 4 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Linear Asset Management
1Purpose
The purpose of this document is to describe the general configuration steps required to
manually set up the configuration within the system landscape that has already been installed
using the corresponding installation or configuration guides for installation.
If you do not want to configure manually and prefer an automated installation process using
BC Sets and other tools, refer to the Quick Guide of your SAP Best Practices version, which
you can find attached to the SAP Note for your package.
2Preparation
2.1Prerequisites
Before you start installing this building block, you must install prerequisite building blocks. For
more information, see the Building Block Prerequisite Matrix
(Prerequisites_Matrix_[xx]_[yy]_[zz].xls; the placeholder [xx] depends on the SAP Best
Practices version you use, for example, BL refers to the SAP Best Practices Baseline
Package, [yy] depends on the language version, for example, EN for English language, and
[zz] depends on the country version, for example, AU for Australia:
Prerequisites_Matrix_Mining_EN_AU.xls). This document can be found on the SAP Best
Practices documentation DVD in the folder ..\[xx]_[zz]\Documentation\; ([xx] depends on the
SAP Best Practices version and [zz] depends on the country version).
3Configuration
3.1Defining LRP Type
Use
The purpose of this activity is to define Linear Reference Pattern (LRP) yupes by entering 4-
character ID and a description.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Linear Asset Management ® Define LRP Type
2.On the Change View “Define LRP Type“: Overview screen, choose New Entries to create
the following entries
LRP Type LRP Type Description Note
PI Pipeline
RD Road Operations
RL Railway
3.Choose Save.
© SAP AG Page 5 of 23
Linear Asset Management
1Purpose
The purpose of this document is to describe the general configuration steps required to
manually set up the configuration within the system landscape that has already been installed
using the corresponding installation or configuration guides for installation.
If you do not want to configure manually and prefer an automated installation process using
BC Sets and other tools, refer to the Quick Guide of your SAP Best Practices version, which
you can find attached to the SAP Note for your package.
2Preparation
2.1Prerequisites
Before you start installing this building block, you must install prerequisite building blocks. For
more information, see the Building Block Prerequisite Matrix
(Prerequisites_Matrix_[xx]_[yy]_[zz].xls; the placeholder [xx] depends on the SAP Best
Practices version you use, for example, BL refers to the SAP Best Practices Baseline
Package, [yy] depends on the language version, for example, EN for English language, and
[zz] depends on the country version, for example, AU for Australia:
Prerequisites_Matrix_Mining_EN_AU.xls). This document can be found on the SAP Best
Practices documentation DVD in the folder ..\[xx]_[zz]\Documentation\; ([xx] depends on the
SAP Best Practices version and [zz] depends on the country version).
3Configuration
3.1Defining LRP Type
Use
The purpose of this activity is to define Linear Reference Pattern (LRP) yupes by entering 4-
character ID and a description.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Linear Asset Management ® Define LRP Type
2.On the Change View “Define LRP Type“: Overview screen, choose New Entries to create
the following entries
LRP Type LRP Type Description Note
PI Pipeline
RD Road Operations
RL Railway
3.Choose Save.
© SAP AG Page 5 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
3.2Defining Organizational Area
Use
The purpose of this activity is to define an organization area that can be used to make
characteristics as relevant for linear asset management.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Linear Asset Management ® Define Organizational Area for
Characteristics with Linear Data
2.On the Change View “Organizational Area for Characteristics with Linear Data“ screen,
choose New Entries to create the following entries
Ty. Table Org. area Organizational area
002 EQUI L Linear Equipment
003 IFLOT L Linear functional location
3.Choose Save.
3.3Setting View Profiles
Use
The purpose of this activity is to create two new view profiles to support Linear Asset
requirements.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical
Objects® Set View Profiles for Technical Objects
2.On the Change View “Definition of view profiles“: Overview screen choose New Entries to
create the following profile
Field name Description User action and values Note
Screen grp H2 Screen group equipment
data
Profile YLAM_EQP
Profile Standard equipment data profilProfile Description
Screen grp H3 Screen group functional
location data
Profile YLAM_FL
Profile Standard functional location pProfile Description
© SAP AG Page 6 of 23
3.2Defining Organizational Area
Use
The purpose of this activity is to define an organization area that can be used to make
characteristics as relevant for linear asset management.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Linear Asset Management ® Define Organizational Area for
Characteristics with Linear Data
2.On the Change View “Organizational Area for Characteristics with Linear Data“ screen,
choose New Entries to create the following entries
Ty. Table Org. area Organizational area
002 EQUI L Linear Equipment
003 IFLOT L Linear functional location
3.Choose Save.
3.3Setting View Profiles
Use
The purpose of this activity is to create two new view profiles to support Linear Asset
requirements.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical
Objects® Set View Profiles for Technical Objects
2.On the Change View “Definition of view profiles“: Overview screen choose New Entries to
create the following profile
Field name Description User action and values Note
Screen grp H2 Screen group equipment
data
Profile YLAM_EQP
Profile Standard equipment data profilProfile Description
Screen grp H3 Screen group functional
location data
Profile YLAM_FL
Profile Standard functional location pProfile Description
© SAP AG Page 6 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
3.On the Change View “Definition of view profiles“: Overview screen select Profile
YLAM_EQP and YLAM_FL accordingly, then choose Dialog Structure: Activity and
layout of views to input the following values:
YLAM_EQP
Number Description Tab active Seq. no.Seq. no.Seq. no.
10 General Check the
Flag
005 010 015
20 Location Check the
Flag
020 025 300
30 Organization Check the
Flag
030 035
50 Structure Check the
Flag
040 045
60 Additional data 1Check the
Flag
095
100 Additional data 2Check the
Flag
120
105 Additional data 3Check the
Flag
110 100
300 Linear data Check the
Flag
300 350
YLAM_FL
Number Description Tab active Seq. no.Seq. no.Seq. no.
10 General Check the
Flag
005 010 015
20 Location Check the
Flag
020 025 300
30 Organization Check the
Flag
030 035
50 Structure Check the
Flag
040 045
60 Additional data 1Check the
Flag
095
80 Additional data 2Check the
Flag
120
85 Additional data 3Check the
Flag
110 100
300 Linear data Check the
Flag
300 350
4.Choose Save.
5.On the Change View “Definition of view profiles“: Overview screen select Profile
YLAM_EQP and YLAM_FL accordingly, then choose Dialog Structure: Icons and texts of
views to input the following values:
YLAM_EQP
Number Description Icon Tab title
60 Additional data 1 Classification
© SAP AG Page 7 of 23
3.On the Change View “Definition of view profiles“: Overview screen select Profile
YLAM_EQP and YLAM_FL accordingly, then choose Dialog Structure: Activity and
layout of views to input the following values:
YLAM_EQP
Number Description Tab active Seq. no.Seq. no.Seq. no.
10 General Check the
Flag
005 010 015
20 Location Check the
Flag
020 025 300
30 Organization Check the
Flag
030 035
50 Structure Check the
Flag
040 045
60 Additional data 1Check the
Flag
095
100 Additional data 2Check the
Flag
120
105 Additional data 3Check the
Flag
110 100
300 Linear data Check the
Flag
300 350
YLAM_FL
Number Description Tab active Seq. no.Seq. no.Seq. no.
10 General Check the
Flag
005 010 015
20 Location Check the
Flag
020 025 300
30 Organization Check the
Flag
030 035
50 Structure Check the
Flag
040 045
60 Additional data 1Check the
Flag
095
80 Additional data 2Check the
Flag
120
85 Additional data 3Check the
Flag
110 100
300 Linear data Check the
Flag
300 350
4.Choose Save.
5.On the Change View “Definition of view profiles“: Overview screen select Profile
YLAM_EQP and YLAM_FL accordingly, then choose Dialog Structure: Icons and texts of
views to input the following values:
YLAM_EQP
Number Description Icon Tab title
60 Additional data 1 Classification
© SAP AG Page 7 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Number Description Icon Tab title
100 Additional data 2ICON_ATTACHMENT Documents
105 Additional data 3 Warranties / Partners
300 Linear data ICON_DRAW_LINEAR Linear Data
YLAM_FL
Number Description Icon Tab title
60 Additional data 1 Classification
80 Additional data 2ICON_ATTACHMENT Documents
85 Additional data 3 Warranties / Partners
300 Linear data ICON_DRAW_LINEAR Linear Data
6.Choose Save.
3.4Defining Category of Function Location
Use
The purpose of this activity is to set default value for the measuring point categories.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Functional Locations ® Define Category of Functional
Location
2.On the Change View “Functional Location Category“ Overview screen, choose New
Entries to create the following entries
Field name Description User action
and values
Note
FunctLocCat L
Description Linear
functional
location
Linear Asset Check this flag
PartnDet.Proc PM
View profile YLAM_FL
3.Choose Save.
3.5Maintaining Equipment Categories
Use
The purpose of this activity is to define equipment categories. You use equipment categories
to determine the basic properties that you want the corresponding equipment master record
to have.
Procedure
© SAP AG Page 8 of 23
Number Description Icon Tab title
100 Additional data 2ICON_ATTACHMENT Documents
105 Additional data 3 Warranties / Partners
300 Linear data ICON_DRAW_LINEAR Linear Data
YLAM_FL
Number Description Icon Tab title
60 Additional data 1 Classification
80 Additional data 2ICON_ATTACHMENT Documents
85 Additional data 3 Warranties / Partners
300 Linear data ICON_DRAW_LINEAR Linear Data
6.Choose Save.
3.4Defining Category of Function Location
Use
The purpose of this activity is to set default value for the measuring point categories.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Functional Locations ® Define Category of Functional
Location
2.On the Change View “Functional Location Category“ Overview screen, choose New
Entries to create the following entries
Field name Description User action
and values
Note
FunctLocCat L
Description Linear
functional
location
Linear Asset Check this flag
PartnDet.Proc PM
View profile YLAM_FL
3.Choose Save.
3.5Maintaining Equipment Categories
Use
The purpose of this activity is to define equipment categories. You use equipment categories
to determine the basic properties that you want the corresponding equipment master record
to have.
Procedure
© SAP AG Page 8 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Equipment® Maintain Equipment Category
2.On the Change View “EquipCategories“: Overview screen, check and verify the following
entries
C R
Equipment
CatDesc.
C
Object
info
View profileCC Linear
L
M
Machines
Linear
equipment
Check PM YLAM_EQP CheckCheck
3.Choose Save.
3.6Defining Change Documents, Collective Purchase
Requisition
Use
The purpose of this activity is to define whether linear data should be proposed in the
operation of the maintenance order, depending on the plant and the order type. You can
choose between different default rules, thus determining the origin of the linear data in the
operation of the maintenance order.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Maintenance and
Service Processing ® Maintenance and Service Orders ®
Functions and Settings for Order Types ® Define Change
Documents, Collective Purchase Requisition, MRP relevance
2.On the Change View “Increment for Automatic Operation Number“: Overview screen,
check and verify following entries:
Field name Description User action and values Note
Plnt 1000
Type PM02
MatStatChngeDoc Uncheck this flag
Increment 0010
OrdStChgDc Uncheck this flag
CollReqstn Check this flag
Res/PurRq 2 From release
PDC active Uncheck this flag
Workflow Uncheck this flag
Change document Check this flag
Net Order Price Uncheck this flag
OpStatChangeDoc Uncheck this flag
PRTStatChangeDC Uncheck this flag
© SAP AG Page 9 of 23
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Equipment® Maintain Equipment Category
2.On the Change View “EquipCategories“: Overview screen, check and verify the following
entries
C R
Equipment
CatDesc.
C
Object
info
View profileCC Linear
L
M
Machines
Linear
equipment
Check PM YLAM_EQP CheckCheck
3.Choose Save.
3.6Defining Change Documents, Collective Purchase
Requisition
Use
The purpose of this activity is to define whether linear data should be proposed in the
operation of the maintenance order, depending on the plant and the order type. You can
choose between different default rules, thus determining the origin of the linear data in the
operation of the maintenance order.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Maintenance and
Service Processing ® Maintenance and Service Orders ®
Functions and Settings for Order Types ® Define Change
Documents, Collective Purchase Requisition, MRP relevance
2.On the Change View “Increment for Automatic Operation Number“: Overview screen,
check and verify following entries:
Field name Description User action and values Note
Plnt 1000
Type PM02
MatStatChngeDoc Uncheck this flag
Increment 0010
OrdStChgDc Uncheck this flag
CollReqstn Check this flag
Res/PurRq 2 From release
PDC active Uncheck this flag
Workflow Uncheck this flag
Change document Check this flag
Net Order Price Uncheck this flag
OpStatChangeDoc Uncheck this flag
PRTStatChangeDC Uncheck this flag
© SAP AG Page 9 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Field name Description User action and values Note
Linear Data Order
Operation Default
Rule
3 Default from technical
object in operation only
3.Choose Save.
3.7Defining Default Rules for LAM Notification Items
Use
The purpose of this activity is to you define, dependent on the notification type, whether or not
linear data should be set as default values in notification items.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Maintenance and
Service Processing ® Notification Processing® Additional
Functions ® Define Default Rules for Linear Data in Notification
Items
2.On the Change View “Linear Data – Notif. Item Default Rules dep. On Message Ty“:
screen, choose New Entries to make the following entries:
Field name Description User action and values Note
Typ M1
Def. Rule 4 Default from tech obj..Select it from
Drop down
Typ M2
Def. Rule 1 Default from reference obj..Select it from
Drop down
3.Choose Save.
3.8Changing UOM
Use
The purpose of this activity is to change the UOM “KM” to support decimal places
Procedure
1.Access the activity using one of the following navigation options:
Transaction code CUNI
IMG menu SAP NetWeaver ® General Settings ® Check Units of
Measurement
2.On the Units of Measurement: Initial Screen screen choose the drop down box LENGTH
and Units of Measurement. On the Change Units of Measurement of Dimension Length:
Overview screen, check and verify KM unit via choosing Details (F5) as the following
value.
Field name Description User action and values Note
Int. meas. unit KM
© SAP AG Page 10 of 23
Field name Description User action and values Note
Linear Data Order
Operation Default
Rule
3 Default from technical
object in operation only
3.Choose Save.
3.7Defining Default Rules for LAM Notification Items
Use
The purpose of this activity is to you define, dependent on the notification type, whether or not
linear data should be set as default values in notification items.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Maintenance and
Service Processing ® Notification Processing® Additional
Functions ® Define Default Rules for Linear Data in Notification
Items
2.On the Change View “Linear Data – Notif. Item Default Rules dep. On Message Ty“:
screen, choose New Entries to make the following entries:
Field name Description User action and values Note
Typ M1
Def. Rule 4 Default from tech obj..Select it from
Drop down
Typ M2
Def. Rule 1 Default from reference obj..Select it from
Drop down
3.Choose Save.
3.8Changing UOM
Use
The purpose of this activity is to change the UOM “KM” to support decimal places
Procedure
1.Access the activity using one of the following navigation options:
Transaction code CUNI
IMG menu SAP NetWeaver ® General Settings ® Check Units of
Measurement
2.On the Units of Measurement: Initial Screen screen choose the drop down box LENGTH
and Units of Measurement. On the Change Units of Measurement of Dimension Length:
Overview screen, check and verify KM unit via choosing Details (F5) as the following
value.
Field name Description User action and values Note
Int. meas. unit KM
© SAP AG Page 10 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Field name Description User action and values Note
Commercial KM
Technical km
Decimal places 4
Numerator 1,000
Denominator 1
Measurement
Unit text
Kilometer Long Text
Measurement
Unit text
km Short text
ISO code KMT
Primary Code Check the flag
Commercial
meas. unit
Check the flage
3.Choose Save.
3.9Defining Network Types
Use
The purpose of this activity is to define network types to support linear asset management.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code
SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Linear Asset Management ® Linear Asset Management ®
Define Additional Data for Object Links and Networks ® Define
Network Types
2.On the Change View “Define Network Types“:Overview screen check and verfiy the
following entries
Network Type Network Type
Description
C ChgeDocs
CABL Cabling Check this flag Check this flag
CNVY Conveyors Check this flag Check this flag
PIPE Pipeline Check this flag Check this flag
POWR Powerline Check this flag Check this flag
RAIL Railline Check this flag Check this flag
ROAD Roads Check this flag Check this flag
© SAP AG Page 11 of 23
Field name Description User action and values Note
Commercial KM
Technical km
Decimal places 4
Numerator 1,000
Denominator 1
Measurement
Unit text
Kilometer Long Text
Measurement
Unit text
km Short text
ISO code KMT
Primary Code Check the flag
Commercial
meas. unit
Check the flage
3.Choose Save.
3.9Defining Network Types
Use
The purpose of this activity is to define network types to support linear asset management.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code
SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Linear Asset Management ® Linear Asset Management ®
Define Additional Data for Object Links and Networks ® Define
Network Types
2.On the Change View “Define Network Types“:Overview screen check and verfiy the
following entries
Network Type Network Type
Description
C ChgeDocs
CABL Cabling Check this flag Check this flag
CNVY Conveyors Check this flag Check this flag
PIPE Pipeline Check this flag Check this flag
POWR Powerline Check this flag Check this flag
RAIL Railline Check this flag Check this flag
ROAD Roads Check this flag Check this flag
© SAP AG Page 11 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
3.Choose Save.
3.10Defining Network Group
Use
The purpose of this activity is to define network groups to support linear asset management.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Linear Asset Management ® Linear Asset Management ®
Define Additional Data for Object Links and Networks ® Define
Network Group
2.On the Change View “Define Network Group“:Overview screen check and verfiy following
entries
NetGroup Network Group Description Note
CV_FIN Finished Coal Conveyors
CV_RAW Raw Coal Conveyors
CV_REJECTS Reject Conveyors
PI_SLURRY Slurry Pipelines
PI_WASTE Waste Pipelines
PI_WATER Water Pipelines
PWR_11KW 11KW Powerlines
PWR_33KW 33KW Powerlines
RD_ACCESS Access Roads
RD_HAUL Haul Roads
3.Choose Save.
3.11Defining Node Type for Object Link From / To
Use
The purpose of this activity is to define Node Type for Object Links to support linear asset
management
Procedure
© SAP AG Page 12 of 23
3.Choose Save.
3.10Defining Network Group
Use
The purpose of this activity is to define network groups to support linear asset management.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Linear Asset Management ® Linear Asset Management ®
Define Additional Data for Object Links and Networks ® Define
Network Group
2.On the Change View “Define Network Group“:Overview screen check and verfiy following
entries
NetGroup Network Group Description Note
CV_FIN Finished Coal Conveyors
CV_RAW Raw Coal Conveyors
CV_REJECTS Reject Conveyors
PI_SLURRY Slurry Pipelines
PI_WASTE Waste Pipelines
PI_WATER Water Pipelines
PWR_11KW 11KW Powerlines
PWR_33KW 33KW Powerlines
RD_ACCESS Access Roads
RD_HAUL Haul Roads
3.Choose Save.
3.11Defining Node Type for Object Link From / To
Use
The purpose of this activity is to define Node Type for Object Links to support linear asset
management
Procedure
© SAP AG Page 12 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
1.Access the activity using one of the following navigation options:
Transaction code
SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Linear Asset Management ® Linear Asset Management ®
Define Additional Data for Object Links and Networks ® Define
Node Type for Object Link From/To
2.On the Change View “Node Type for Object Link From / To“:Overview screen check and
verfity the following entries
Field name Description User action and values Note
Node Type PU
Node Type
Description
Pump
Node Type RC
Node Type
Description
Road Crossing
Node Type SW
Node Type
Description
Switch
Node Type VL
Node Type
Description
Valve
3.Choose Save.
3.12Adding Medium Types
Use
The purpose of this activity is to define Node Type for Object Links to support linear asset
management
Procedure
1.Access the activity using one of the following navigation options:
Transaction code OINM
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Object Links ® Define Media for Object Links
2.On the Change View “Link Medium (View)“:Overview screen make the following entries
Field name Description User action and values Note
Medium 000003
ShrtText f. medium Slurry - Coal
3.Choose Save.
© SAP AG Page 13 of 23
1.Access the activity using one of the following navigation options:
Transaction code
SPRO
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Linear Asset Management ® Linear Asset Management ®
Define Additional Data for Object Links and Networks ® Define
Node Type for Object Link From/To
2.On the Change View “Node Type for Object Link From / To“:Overview screen check and
verfity the following entries
Field name Description User action and values Note
Node Type PU
Node Type
Description
Pump
Node Type RC
Node Type
Description
Road Crossing
Node Type SW
Node Type
Description
Switch
Node Type VL
Node Type
Description
Valve
3.Choose Save.
3.12Adding Medium Types
Use
The purpose of this activity is to define Node Type for Object Links to support linear asset
management
Procedure
1.Access the activity using one of the following navigation options:
Transaction code OINM
IMG menu Plant Maintenance and Customer Service ® Master Data in
Plant Maintenance and Customer Service ® Technical Objects
® Object Links ® Define Media for Object Links
2.On the Change View “Link Medium (View)“:Overview screen make the following entries
Field name Description User action and values Note
Medium 000003
ShrtText f. medium Slurry - Coal
3.Choose Save.
© SAP AG Page 13 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
4Master Data
4.1Creating Characteristics (Num)
Use
The purpose of this activity is to create Numeric characteristics.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code
CT04
SAP ECC menu Cross-Application Components® Classification System ®
Master Data®Characteristics
2.On the Characteristics screen input the following entries and click Create
Field name Description User action and values Note
Characteristic YPIPE_ANGLE
3.On the Create Characteristics screen, on the Basic Data tab input the following entries:
DescriptionChars
Group
Data
Type
Number
of Chars
Decima
l
Places
Unit of
Measure
Single/Mult
Value
Interval/N
egative
Angle of
Inclination
YMM_
01
NUM 10 2 deg Check MultCheck
Neg
4.Choose Save.
5.Repeat the above steps from 1 to 4 with the following entries (all data types are Num –
Numeric):
Characteri
stic
Descript
ion
Chars
Group
Number
of
Chars
Decimal
Places
Unit of
Measure
Single/
Mult
Value
Interval/
Negative
YPIPE_DIA
METER
Diamete
r of
Pipeline
YMM_0
1
10 2 mm Check
Mult
YPIPE_WA
LLTHICKN
ESS
Pipeline
Wall
Thicknes
s
YMM_0
1
10 2 mm Check
Mult
YPUMP_DI
SCHARGE
Pump
Discharg
e (L/S)
5 2 Check
Single
YPUMP_IM
PELLER_V
ANES
Number
of Vanes
1 0 Check
Single
YPUMP_S
PEED
Pump
Speed
(RPM)
10 2 Check
Single
YPUMP_T
OTALHEA
D
Total
Head
(M)
10 2 Check
Single
© SAP AG Page 14 of 23
4Master Data
4.1Creating Characteristics (Num)
Use
The purpose of this activity is to create Numeric characteristics.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code
CT04
SAP ECC menu Cross-Application Components® Classification System ®
Master Data®Characteristics
2.On the Characteristics screen input the following entries and click Create
Field name Description User action and values Note
Characteristic YPIPE_ANGLE
3.On the Create Characteristics screen, on the Basic Data tab input the following entries:
DescriptionChars
Group
Data
Type
Number
of Chars
Decima
l
Places
Unit of
Measure
Single/Mult
Value
Interval/N
egative
Angle of
Inclination
YMM_
01
NUM 10 2 deg Check MultCheck
Neg
4.Choose Save.
5.Repeat the above steps from 1 to 4 with the following entries (all data types are Num –
Numeric):
Characteri
stic
Descript
ion
Chars
Group
Number
of
Chars
Decimal
Places
Unit of
Measure
Single/
Mult
Value
Interval/
Negative
YPIPE_DIA
METER
Diamete
r of
Pipeline
YMM_0
1
10 2 mm Check
Mult
YPIPE_WA
LLTHICKN
ESS
Pipeline
Wall
Thicknes
s
YMM_0
1
10 2 mm Check
Mult
YPUMP_DI
SCHARGE
Pump
Discharg
e (L/S)
5 2 Check
Single
YPUMP_IM
PELLER_V
ANES
Number
of Vanes
1 0 Check
Single
YPUMP_S
PEED
Pump
Speed
(RPM)
10 2 Check
Single
YPUMP_T
OTALHEA
D
Total
Head
(M)
10 2 Check
Single
© SAP AG Page 14 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
4.2Creating Characteristics (Char)
Use
The purpose of this activity is to create Character characteristics.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code
CT04
SAP ECC menu Cross-Application Components® Classification System ®
Master Data®Characteristics
2.On the Characteristics screen input the following entries and click Create
Field name Description User action and values Note
Characteristic YPIPE_COATING
3.On the Create Characteristics screen, on the Basic Data tab input the following entries
(All of the following data type is: Char – Character)
Description Number of
Chars
Single/Mult Value
Angle of Inclination 10 Check Mult
4.Choose Save.
5.Repeat the above steps from 1 to 4 with the following entry:
Characteristic Description Number of
Chars
Single/Mult
Value
YPUMP_IMPELLER_DESIGN Impeller Design
30 Check Single
6.Repeat the above steps from 1 to 3 with the following entries:
Characteristic Description Number of
Chars
Single/Mult
Value
YPIPE_LINER
Internal Lining of
Pipeline
30 Check Mult
YPIPE_MATERIAL Construction material
10 Check Mult
YPUMP_TYPE Pump Type 30 Check Single
7.Choose Tab Value and check flag Additional Values for the above three Characteristics.
Maintain the following values for them.
Characteristic Char. Value Description Note
YPIPE_LINER
HDPE
POLYURETHANE
NONE
YPIPE_MATERIAL
HDPE High Density
Polyethylene
© SAP AG Page 15 of 23
4.2Creating Characteristics (Char)
Use
The purpose of this activity is to create Character characteristics.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code
CT04
SAP ECC menu Cross-Application Components® Classification System ®
Master Data®Characteristics
2.On the Characteristics screen input the following entries and click Create
Field name Description User action and values Note
Characteristic YPIPE_COATING
3.On the Create Characteristics screen, on the Basic Data tab input the following entries
(All of the following data type is: Char – Character)
Description Number of
Chars
Single/Mult Value
Angle of Inclination 10 Check Mult
4.Choose Save.
5.Repeat the above steps from 1 to 4 with the following entry:
Characteristic Description Number of
Chars
Single/Mult
Value
YPUMP_IMPELLER_DESIGN Impeller Design
30 Check Single
6.Repeat the above steps from 1 to 3 with the following entries:
Characteristic Description Number of
Chars
Single/Mult
Value
YPIPE_LINER
Internal Lining of
Pipeline
30 Check Mult
YPIPE_MATERIAL Construction material
10 Check Mult
YPUMP_TYPE Pump Type 30 Check Single
7.Choose Tab Value and check flag Additional Values for the above three Characteristics.
Maintain the following values for them.
Characteristic Char. Value Description Note
YPIPE_LINER
HDPE
POLYURETHANE
NONE
YPIPE_MATERIAL
HDPE High Density
Polyethylene
© SAP AG Page 15 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Characteristic Char. Value Description Note
LDPE Low Density
Polyethylene
PP Polypropylene
PVC PVC
GREY IRON Grey Cast iron
DUCT IRON Ductile Cast Iron
CU Copper
STEEL-0.2 Carbon Steel - 0.2%
Carbon
STEEL-0.45 Carbon Steel - 0.45%
Carbon
YPUMP_TYPE
PDP Postiive Displacement
Pump
CENTRIFUGAL Centrifugal Pump
8.Choose Save.
4.3Creating Classes and assign Characteristics
Use
The purpose of this activity is to create classes and assign characteristics to these classes.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Cross-Application Components® Classification System ®
Master Data® Classes
Transaction code
CL02
2.On the Class screen input the following entries and click Create
Field name Description User action and values Note
Class YM_PUMP
Class Type 003 Click F4 to get
type Function
Location
3.On the Create Class: screen, on the Basic Data tab input Description: Pump.
4.Choose Char. Tab and input the following entries, then click Enter:
Field name DescriptionUser action and values Note
Char. YPUMP_TYPE Click F4 to get this Char.
Char. YPUMP_IMPELLER_DESIGN Click F4 to get this Char.
Char. YPUMP_IMPELLER_VANES Click F4 to get this Char.
© SAP AG Page 16 of 23
Characteristic Char. Value Description Note
LDPE Low Density
Polyethylene
PP Polypropylene
PVC PVC
GREY IRON Grey Cast iron
DUCT IRON Ductile Cast Iron
CU Copper
STEEL-0.2 Carbon Steel - 0.2%
Carbon
STEEL-0.45 Carbon Steel - 0.45%
Carbon
YPUMP_TYPE
PDP Postiive Displacement
Pump
CENTRIFUGAL Centrifugal Pump
8.Choose Save.
4.3Creating Classes and assign Characteristics
Use
The purpose of this activity is to create classes and assign characteristics to these classes.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Cross-Application Components® Classification System ®
Master Data® Classes
Transaction code
CL02
2.On the Class screen input the following entries and click Create
Field name Description User action and values Note
Class YM_PUMP
Class Type 003 Click F4 to get
type Function
Location
3.On the Create Class: screen, on the Basic Data tab input Description: Pump.
4.Choose Char. Tab and input the following entries, then click Enter:
Field name DescriptionUser action and values Note
Char. YPUMP_TYPE Click F4 to get this Char.
Char. YPUMP_IMPELLER_DESIGN Click F4 to get this Char.
Char. YPUMP_IMPELLER_VANES Click F4 to get this Char.
© SAP AG Page 16 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Field name DescriptionUser action and values Note
Char. YPUMP_DISCHARGE Click F4 to get this Char.
Char. YPUMP_TOTALHEAD Click F4 to get this Char.
Char. YPUMP_SPEED Click F4 to get this Char.
5.Choose Save.
6.Choose Back (F3) to the Class screen and input the following entries and click Create
Field name Description User action and values Note
Class YPIPELINE_SLURRY
Class Type 003 Click F4 to get
type Function
Location
7.On the Create Class: screen, on the Basic Data tab input Description: Pump and
Organizational area: L.
8.Choose Keywords tab, maintain Pipeline as Keyword.
9.Choose Char. Tab and input the following entries, then click Enter:
Char. Org. Areas
YPIPE_DIAMETER L
YPIPE_WALLTHICKNESS L
YPIPE_ANGLE L
YPIPE_MATERIAL
YPIPE_LINER
10.Choose Save.
4.4Creating Linear Reference Patters
Use
The purpose of this activity is to create a linear reference pattern.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code IK81
SAP ECC menu Logistics ® Plant Maintenance ® Management of Technical
Objects ® Functional Location ® Linear Asset Management ®
Linear Reference Patterns® Create Linear Reference Pattern
2.On the Create Linear Reference Patter: Initial screen input the following entries and
choose Enter
Field name Description User action and values Note
Linear reference
Pattern
PIPE000010
3.On the the Create Linear Reference Patter: Master Data screen, input the following
entries:
© SAP AG Page 17 of 23
Field name DescriptionUser action and values Note
Char. YPUMP_DISCHARGE Click F4 to get this Char.
Char. YPUMP_TOTALHEAD Click F4 to get this Char.
Char. YPUMP_SPEED Click F4 to get this Char.
5.Choose Save.
6.Choose Back (F3) to the Class screen and input the following entries and click Create
Field name Description User action and values Note
Class YPIPELINE_SLURRY
Class Type 003 Click F4 to get
type Function
Location
7.On the Create Class: screen, on the Basic Data tab input Description: Pump and
Organizational area: L.
8.Choose Keywords tab, maintain Pipeline as Keyword.
9.Choose Char. Tab and input the following entries, then click Enter:
Char. Org. Areas
YPIPE_DIAMETER L
YPIPE_WALLTHICKNESS L
YPIPE_ANGLE L
YPIPE_MATERIAL
YPIPE_LINER
10.Choose Save.
4.4Creating Linear Reference Patters
Use
The purpose of this activity is to create a linear reference pattern.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code IK81
SAP ECC menu Logistics ® Plant Maintenance ® Management of Technical
Objects ® Functional Location ® Linear Asset Management ®
Linear Reference Patterns® Create Linear Reference Pattern
2.On the Create Linear Reference Patter: Initial screen input the following entries and
choose Enter
Field name Description User action and values Note
Linear reference
Pattern
PIPE000010
3.On the the Create Linear Reference Patter: Master Data screen, input the following
entries:
© SAP AG Page 17 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Linear
Pattern
Description
LRP Type Marker Distance Code Marker Distance Unit
Slurry
Pipeline
PI Pipeline1 Shortest Distance KM
4.Choose Add Marker to input the following entries:
Marker Marker Description Marker Type Marker Location UoM
KM10 KM 10 M Marker 10 KM
5.Choose Save.
4.5Creating Function Location
Use
The purpose of this activity is to create function location.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Plant Maintenance ® Management of Technical
Objects ® Functional Location ® Create
Transaction code IL01
2.Refer to the following file for details of the master data required:
SMB0W_IL01_O001_D49.TXT
Result
The function locations have been created.
4.6Adding Classification View for Function Location
Use
The purpose of this activity is to create function location.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Plant Maintenance ® Management of Technical
Objects ® Functional Location ® Change
Transaction code IL02
2.Refer to the following file for details of the master data required:
SMB0W_IL02_O001_D49.TXT
Result
The function locations have been changed and the classification view has been added it.
4.7Changing Function Location of Classification View
Use
The purpose of this activity is to add classification value to functional location.
Procedure
© SAP AG Page 18 of 23
Linear
Pattern
Description
LRP Type Marker Distance Code Marker Distance Unit
Slurry
Pipeline
PI Pipeline1 Shortest Distance KM
4.Choose Add Marker to input the following entries:
Marker Marker Description Marker Type Marker Location UoM
KM10 KM 10 M Marker 10 KM
5.Choose Save.
4.5Creating Function Location
Use
The purpose of this activity is to create function location.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Plant Maintenance ® Management of Technical
Objects ® Functional Location ® Create
Transaction code IL01
2.Refer to the following file for details of the master data required:
SMB0W_IL01_O001_D49.TXT
Result
The function locations have been created.
4.6Adding Classification View for Function Location
Use
The purpose of this activity is to create function location.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Plant Maintenance ® Management of Technical
Objects ® Functional Location ® Change
Transaction code IL02
2.Refer to the following file for details of the master data required:
SMB0W_IL02_O001_D49.TXT
Result
The function locations have been changed and the classification view has been added it.
4.7Changing Function Location of Classification View
Use
The purpose of this activity is to add classification value to functional location.
Procedure
© SAP AG Page 18 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Plant Maintenance ® Management of Technical Objects
® Functional Location ® Change
Transaction code IL02
2.On the Change Functional Location: Initial Screen, enter YMM-1000-SPLN-P0-1 in the
field of Functional loc.
3.Choose Enter.
4.On the Change Functional Location: Master Data screen, choose Classification.
5.On the Change Functional Location: Classification screen, choose the line of Pipeline
Wall Thickness and choose Insert Row.
6.Enter 10.00 mm.
7.Choose Deselect All.
8.Repeat step 6 to 8 to make the value of Pipeline Wall Thickness as following:
Characteristic Description Value
Pipeline Wall Thickness 6.00 mm
10.00 mm
14.00 mm
15.00 mm
16.00 mm
17.00 mm
18.00 mm
19.00 mm
9.Choose Back.
10.Choose Save.
11.Repeat above steps with following data:
Characteristic Description Value
Functional loc. YMM-1000-SPLN-P0-2
Pipeline Wall Thickness 10.00 mm
15.00 mm
18.00 mm
Characteristic Description Value
Functional loc. YMM-1000-SPLN-P0-3
Pipeline Wall Thickness 10.00 mm
15.00 mm
18.00 mm
4.8Changing Function Location of Linear Data View
Use
The purpose of this activity is to change linear data view for functional location.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Plant Maintenance ® Management of Technical Objects
® Functional Location ® Change
Transaction code IL02
© SAP AG Page 19 of 23
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Plant Maintenance ® Management of Technical Objects
® Functional Location ® Change
Transaction code IL02
2.On the Change Functional Location: Initial Screen, enter YMM-1000-SPLN-P0-1 in the
field of Functional loc.
3.Choose Enter.
4.On the Change Functional Location: Master Data screen, choose Classification.
5.On the Change Functional Location: Classification screen, choose the line of Pipeline
Wall Thickness and choose Insert Row.
6.Enter 10.00 mm.
7.Choose Deselect All.
8.Repeat step 6 to 8 to make the value of Pipeline Wall Thickness as following:
Characteristic Description Value
Pipeline Wall Thickness 6.00 mm
10.00 mm
14.00 mm
15.00 mm
16.00 mm
17.00 mm
18.00 mm
19.00 mm
9.Choose Back.
10.Choose Save.
11.Repeat above steps with following data:
Characteristic Description Value
Functional loc. YMM-1000-SPLN-P0-2
Pipeline Wall Thickness 10.00 mm
15.00 mm
18.00 mm
Characteristic Description Value
Functional loc. YMM-1000-SPLN-P0-3
Pipeline Wall Thickness 10.00 mm
15.00 mm
18.00 mm
4.8Changing Function Location of Linear Data View
Use
The purpose of this activity is to change linear data view for functional location.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Plant Maintenance ® Management of Technical Objects
® Functional Location ® Change
Transaction code IL02
© SAP AG Page 19 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
2.On the Change Functional Location: Initial Screen, enter YMM-1000-SPLN-P0-1 in the
field of Functional loc.
3.Choose Enter.
4.On the Change Functional Location: Master Data screen, choose the tab page Linear
Data.
5.In the Characteristic Values Linear Data sub area, choose Append Row.
6.On the Char.description column, choose F4.
7.In the pop-up dialog box, choose the value of Pipeline Wall Thickness 19.00 mm and
make the following data:
Start Point End Point Length Uom
9.250 9.500 10.000 KM
8.Repeat step 5 to 7 to make the linear data like following:
Char.descriptionChar.ValueStart Point End PointLength Uom
Pipeline Wall
Thickness
19.00 mm 9.250 9.500 10.000 KM
Pipeline Wall
Thickness
6.00 mm 3.000 5.000 2.000 KM
Pipeline Wall
Thickness
10.00 mm 5.000 9.250 4.250 KM
Pipeline Wall
Thickness
10.00 mm 24.000 36.000 12.000 KM
Pipeline Wall
Thickness
10.00 mm 38.000 42.000 4.000 KM
Pipeline Wall
Thickness
14.00 mm 8.000 9.250 1.000 KM
Pipeline Wall
Thickness
14.00 mm 0.000 3.000 3.000 KM
Pipeline Wall
Thickness
15.00 mm 9.500 23.000 13.500 KM
Pipeline Wall
Thickness
17.00 mm 36.000 38.000 2.000 KM
Pipeline Wall
Thickness
18.00 mm 23.000 24.000 1.000 KM
9.Choose Save.
10.Repeat above steps with following data:
Functional loc. YMM-1000-SPLN-P0-2
Char.descriptionChar.ValueStart Point End PointLength Uom
Pipeline Wall
Thickness
10.00 mm 42.000 59.000 17.000 KM
Pipeline Wall
Thickness
10.00 mm 63.000 88.000 25.000 KM
Pipeline Wall
Thickness
18.00 mm 59.000 63.000 4.000 KM
Functional loc. YMM-1000-SPLN-P0-3
Char.descriptionChar.ValueStart Point End PointLength Uom
Pipeline Wall 10.00 mm 102.000 120.000 18.000 KM
© SAP AG Page 20 of 23
2.On the Change Functional Location: Initial Screen, enter YMM-1000-SPLN-P0-1 in the
field of Functional loc.
3.Choose Enter.
4.On the Change Functional Location: Master Data screen, choose the tab page Linear
Data.
5.In the Characteristic Values Linear Data sub area, choose Append Row.
6.On the Char.description column, choose F4.
7.In the pop-up dialog box, choose the value of Pipeline Wall Thickness 19.00 mm and
make the following data:
Start Point End Point Length Uom
9.250 9.500 10.000 KM
8.Repeat step 5 to 7 to make the linear data like following:
Char.descriptionChar.ValueStart Point End PointLength Uom
Pipeline Wall
Thickness
19.00 mm 9.250 9.500 10.000 KM
Pipeline Wall
Thickness
6.00 mm 3.000 5.000 2.000 KM
Pipeline Wall
Thickness
10.00 mm 5.000 9.250 4.250 KM
Pipeline Wall
Thickness
10.00 mm 24.000 36.000 12.000 KM
Pipeline Wall
Thickness
10.00 mm 38.000 42.000 4.000 KM
Pipeline Wall
Thickness
14.00 mm 8.000 9.250 1.000 KM
Pipeline Wall
Thickness
14.00 mm 0.000 3.000 3.000 KM
Pipeline Wall
Thickness
15.00 mm 9.500 23.000 13.500 KM
Pipeline Wall
Thickness
17.00 mm 36.000 38.000 2.000 KM
Pipeline Wall
Thickness
18.00 mm 23.000 24.000 1.000 KM
9.Choose Save.
10.Repeat above steps with following data:
Functional loc. YMM-1000-SPLN-P0-2
Char.descriptionChar.ValueStart Point End PointLength Uom
Pipeline Wall
Thickness
10.00 mm 42.000 59.000 17.000 KM
Pipeline Wall
Thickness
10.00 mm 63.000 88.000 25.000 KM
Pipeline Wall
Thickness
18.00 mm 59.000 63.000 4.000 KM
Functional loc. YMM-1000-SPLN-P0-3
Char.descriptionChar.ValueStart Point End PointLength Uom
Pipeline Wall 10.00 mm 102.000 120.000 18.000 KM
© SAP AG Page 20 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Char.descriptionChar.ValueStart Point End PointLength Uom
Thickness
Pipeline Wall
Thickness
15.00 mm 88.000 102.000 14.000 KM
Pipeline Wall
Thickness
18.00 mm 120.000 125.000 5.000 KM
4.9Creating Equipment
Use
The purpose of this activity is to create equipment and assign to function location.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Production® Master Data® Production Resources and
Tools® Production Resources/Tools® Equipment® Create
Transaction code IE01
2.Refer to the following file for details of the master data required:
SMB0W_IE01_O001_D49.TXT
Result
The equipments have been created and assigned to related Function locations.
4.10Changing Linear Reference Pattern
Use
The purpose of this activity is to create equipment.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code IK82
SAP ECC menu Logistics ® Plant Maintenance® Management of Technical
Objects® Functional Location® Linear Asset Management® Linear
Reference Patterns® Change Linear Reference Pattern
2.On the Change Linear Reference Patter: Initial screen input the following entries and
choose Enter
Field name Description User action and values Note
Linear reference
Pattern
PIPE000010
3.On the Create Linear Reference Patter: Master Data screen, choose Add Marker to input
the following entries:
MarkerMarker
Description
Marker Type Marker
Location
UoM Technical Object
KM100 KM 100 M Marker 100.000 KM
KM110 KM 110 M Marker 110.000 KM
KM120 KM 120 M Marker 120.000 KM
© SAP AG Page 21 of 23
Char.descriptionChar.ValueStart Point End PointLength Uom
Thickness
Pipeline Wall
Thickness
15.00 mm 88.000 102.000 14.000 KM
Pipeline Wall
Thickness
18.00 mm 120.000 125.000 5.000 KM
4.9Creating Equipment
Use
The purpose of this activity is to create equipment and assign to function location.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Production® Master Data® Production Resources and
Tools® Production Resources/Tools® Equipment® Create
Transaction code IE01
2.Refer to the following file for details of the master data required:
SMB0W_IE01_O001_D49.TXT
Result
The equipments have been created and assigned to related Function locations.
4.10Changing Linear Reference Pattern
Use
The purpose of this activity is to create equipment.
Procedure
1.Access the activity using one of the following navigation options:
Transaction code IK82
SAP ECC menu Logistics ® Plant Maintenance® Management of Technical
Objects® Functional Location® Linear Asset Management® Linear
Reference Patterns® Change Linear Reference Pattern
2.On the Change Linear Reference Patter: Initial screen input the following entries and
choose Enter
Field name Description User action and values Note
Linear reference
Pattern
PIPE000010
3.On the Create Linear Reference Patter: Master Data screen, choose Add Marker to input
the following entries:
MarkerMarker
Description
Marker Type Marker
Location
UoM Technical Object
KM100 KM 100 M Marker 100.000 KM
KM110 KM 110 M Marker 110.000 KM
KM120 KM 120 M Marker 120.000 KM
© SAP AG Page 21 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
MarkerMarker
Description
Marker Type Marker
Location
UoM Technical Object
KM20 KM 20 M Marker 20.000 KM
KM30 KM 30 M Marker 30.000 KM
KM40 KM 40 M Marker 40.000 KM
KM50 KM 50 M Marker 50.000 KM
KM60 KM 60 M Marker 60.000 KM
KM70 KM 70 M Marker 70.000 KM
KM80 KM 80 M Marker 80.000 KM
KM90 KM 90 M Marker 90.000 KM
PM01 Pressure
Monitoring
Station #1
F Function
Location
25.000 KM YMM-1000-SPLN-
PM-1
PM02 Pressure
Monitoring
Station #2
F Function
Location
65.000 KM YMM-1000-SPLN-
PM-2
PM03 Pressure
Monitoring
Staiton #3
F Function
Location
105.000 KM YMM-1000-SPLN-
PM-3
PU01 Pumping
Station 1
F Function
Location
0.000 KM YMM-1000-SPLN-
PU-1
PU02 Boosting
Pumping
Station 2
F Function
Location
42.000 KM YMM-1000-SPLN-
PU-1
PU03 Boosting
Pumping
Station 3
F Function
Location
88.000 KM YMM-1000-SPLN-
PU-1
4.Choose Save.
Result
The linear reference pattern has been changed.
4.11Creating Networks
Use
The purpose of this activity is to create an object network.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Plant Maintenance® Management of Technical
Objects® Functional Location® Linear Asset Management®
Networks ® Create Object Network
Transaction code IN21
2.On the Create Network: Initial screen, Input Network ID: PN000001 and Object Type:
FL Function Location , then choose Enter.
3.On the Create Function Location Network: PN000001 screen, input the following entries:
© SAP AG Page 22 of 23
MarkerMarker
Description
Marker Type Marker
Location
UoM Technical Object
KM20 KM 20 M Marker 20.000 KM
KM30 KM 30 M Marker 30.000 KM
KM40 KM 40 M Marker 40.000 KM
KM50 KM 50 M Marker 50.000 KM
KM60 KM 60 M Marker 60.000 KM
KM70 KM 70 M Marker 70.000 KM
KM80 KM 80 M Marker 80.000 KM
KM90 KM 90 M Marker 90.000 KM
PM01 Pressure
Monitoring
Station #1
F Function
Location
25.000 KM YMM-1000-SPLN-
PM-1
PM02 Pressure
Monitoring
Station #2
F Function
Location
65.000 KM YMM-1000-SPLN-
PM-2
PM03 Pressure
Monitoring
Staiton #3
F Function
Location
105.000 KM YMM-1000-SPLN-
PM-3
PU01 Pumping
Station 1
F Function
Location
0.000 KM YMM-1000-SPLN-
PU-1
PU02 Boosting
Pumping
Station 2
F Function
Location
42.000 KM YMM-1000-SPLN-
PU-1
PU03 Boosting
Pumping
Station 3
F Function
Location
88.000 KM YMM-1000-SPLN-
PU-1
4.Choose Save.
Result
The linear reference pattern has been changed.
4.11Creating Networks
Use
The purpose of this activity is to create an object network.
Procedure
1.Access the activity using one of the following navigation options:
SAP ECC menu Logistics ® Plant Maintenance® Management of Technical
Objects® Functional Location® Linear Asset Management®
Networks ® Create Object Network
Transaction code IN21
2.On the Create Network: Initial screen, Input Network ID: PN000001 and Object Type:
FL Function Location , then choose Enter.
3.On the Create Function Location Network: PN000001 screen, input the following entries:
© SAP AG Page 22 of 23
SAP Best Practices Linear Asset Management (D49): Configuration Guide
Field name Description User actions and values Note
Basic Data
NetwrkID short text Slurry Pipeline Network
Network Type PIPE
Network Group PI_SLURRY
Linear Reference
Pattern PIPE000010
Start Point 0
End Point 125
Unit of Measure KM
4.Choose Append Row tree times and input the following entries and choose Enter:
Link from Floc. Link to Floc. Floc. Link Object Note
YMM-1000-SPLN-PU-1 YMM-1000-SPLN-P0-1
YMM-1000-SPLN-P0-1 YMM-1000-SPLN-P0-2 YMM-1000-SPLN-PU-2
YMM-1000-SPLN-P0-2 YMM-1000-SPLN-P0-3 YMM-1000-SPLN-PU-3
5.Choose Save.
Result
The network has been created
© SAP AG Page 23 of 23
Field name Description User actions and values Note
Basic Data
NetwrkID short text Slurry Pipeline Network
Network Type PIPE
Network Group PI_SLURRY
Linear Reference
Pattern PIPE000010
Start Point 0
End Point 125
Unit of Measure KM
4.Choose Append Row tree times and input the following entries and choose Enter:
Link from Floc. Link to Floc. Floc. Link Object Note
YMM-1000-SPLN-PU-1 YMM-1000-SPLN-P0-1
YMM-1000-SPLN-P0-1 YMM-1000-SPLN-P0-2 YMM-1000-SPLN-PU-2
YMM-1000-SPLN-P0-2 YMM-1000-SPLN-P0-3 YMM-1000-SPLN-PU-3
5.Choose Save.
Result
The network has been created
© SAP AG Page 23 of 23
Tags
Categories
BusinessDownload
Download Slideshow Get the original presentation fileQuick Actions
Statistics
- Views 879
- Slides 23
- Age 1640 days
Related Slideshows
1
DTI BPI Pivot Small Business - BUSINESS START UP PLAN
MeljunCortes
28 views
1
CATHOLIC EDUCATIONAL Corporate Responsibilities
MeljunCortes
30 views
11
Karin Schaupp – Evocation; lançamento: 2000
alfeuRIO
28 views
10
Pillars of Biblical Oneness in the Book of Acts
JanParon
26 views
31
7-10. STP + Branding and Product & Services Strategies.pptx
itsyash298
27 views
44
Business Legislation PPT - UNIT 1 jimllpkggg
slogeshk98
29 views