Lecture on multiview drawings in civil engineering drawing and its basics also about the projectins

Lecture on multiview drawings in civil engineering drawing and its basics also about the projectins

1. MECHANICAL DRAWING MULTIVIEW DRAWINGS

2. Different views of an object Objects may be drawn in different ways Pictorial Multiview Better for showing true size and shape Each view only shows two dimensions Better for visualizing the object All three dimensions shown on a single view

3. Multiview Drawing

4. Multiview Drawing A multiview drawing is one that shows two or more two-dimensional views of a three-dimensional object. Multiview drawings provide the shape description of an object. When combined with dimensions, multiview drawings serve as the main form of communication between designers and manufacturers.

5. Multiview Drawing Another name for orthographic projection is multiview drawing Involves visualization and implementation Ability to see clearly in the mind’s eye an object Process of drawing the object

6. Angles of Projection First-angle projection Used by many European countries Object is projected onto planes from the first angle or quadrant Front view projected to vertical plane Top view projected to horizontal plane Left-side view projected to profile plane

7. Angles of Projection Third-angle projection Standard for the United States Third quadrant is used for projection Front view projected to vertical plane Top view projected to horizontal plane Right-side view projected to profile plane

8. Choosing Views Most commonly used views Front View Top View Right Side View Most descriptive view is typically designated as the Front View

9. Choosing Views Complex objects require three views to describe its shape Simple objects can be described with two views Ex: Soda Can Thin objects can be described with only one view Depth is given in a note Ex: Erasing Shield

10. Placement of Views Views should be visually balanced within the working space

11. Steps for Centering a Drawing Draw border and title block using light construction lines Draw diagonal lines from corners of border

12. Layout of Views

13. Steps for Centering a Drawing Add: Length 5.13 Space 1.50 Width 2.00 Horizontal 8.63 Height 3.00 Space 1.50 Width 2.00 Vertical 6.50

14. Steps for Centering a Drawing Draw a box the size of all views Measure from the center: Half the width Half the height

15. Steps for Centering a Drawing Draw in views using light construction lines

16. Adding Details Add holes and features Transfer horizontal and vertical features Use miter line to transfer depth

17. Straight Edges Edges that are parallel to a plane of projection appear as lines Edges that are inclined to a plane of projection appear as foreshortened lines

18. Curved Edges Curved edges project as straight lines on the plane to which they are perpendicular Curved edges project as curved lines on the planes to which they are parallel or inclined

19. Normal Surfaces Normal surfaces appear as an edge in two opposite principal views, and appear a surface in all other principal views.

20. Inclined Surfaces Inclined surfaces appear as an edge in two opposite principal views, and appear foreshortened (not true size) in all other principal views.

21. Oblique Surfaces Oblique surfaces do not appear either as an edge or true size in any principal view.

22. Intersections & Tangencies Where a curved surface is tangent to a plane surface, no line should be shown where they join

23. Intersections & Tangencies Where a plane surface intersects a curved surface, an edge is formed

24. What is Multiview drawing? Ortho (straight) + graphic ( drawing) An orthographic view is drawn looking straight at one side of the object (at 90 ° to it) Drawing more than one orthographic view of an object on the same page Line of sight Projection plane Object

25. Orthographic projection is a technique that is used to create multiview drawings. Orthographic projection is any projection of the features of an object onto an imaginary plane of projection. The projection of the features of the object is made by lines of sight that are perpendicular to the plane of projection. Orthographic Projection

26. The best way to understand orthographic projection is to imagine an object contained inside a glass box. Orthographic Projection

27. There is a total of six glass walls surrounding the object. Each wall represents a projection plane onto which a two- dimensional object view will be created. Orthographic Projection

28. A projection plane , also referred to as a plane of projection or picture plane , is an imaginary surface that exists between the viewer and the object. The projection plane is the surface onto which a two-dimensional view of a three-dimensional object is projected and created. Projection Plane

29. Start by focusing only on the front projection plane . A person standing in front of the object would see only the five corners identified in black. 1 2 3 4 5 line of sight at 90 ° angle to projection plane Orthographic Projection

30. Projection lines are used to project each corner outward until they reach the projection plane . Orthographic Projection

31. A projection line is an imaginary line that is used to locate or project the corners, edges, and features of a three-dimensional object onto an imaginary two-dimensional surface. Projection Lines

32. The visible edges of the object are then identified on the projection plane by connecting the projected corners with object lines . Orthographic Projection

33. The orthographic projection process is then repeated on the other projection planes . Orthographic Projection

34. A Question… Each of the blocks to the right have the same overall dimensions and colors. What else to they have in common?

35. Answer …. They all have identical top views!

36. HIDDEN LINES MUTLIVIEW DRAWINGS We place hidden lines in a drawing to do the following things: Show hidden features 2. Clarify the position and shape of features 3. Make the “plate” more readable (NOTE: The term “plate” refers to a finished drawing.)

37. How many views? Cubes (like these dice) have 6 sides Since each side of the die will have its own view… then there must be SIX possible orthographic views! Front

38. How many views? Cubes (like these dice) have 6 sides Since each side of the die will have its own view… then there must be SIX possible orthographic views! Front Top

39. How many views? Cubes (like these dice) have 6 sides Since each side of the die will have its own view… then there must be SIX possible orthographic views! Front Top Right Side

40. How many views? Cubes (like these dice) have 6 sides Since each side of the die will have its own view… The Front , Top , and Right Side are the views that are usually drawn. then there must be SIX possible orthographic views! Front Top Right Side Back Bottom Left Side

41. Where do the views go? All the views MUST be arranged correctly Imagine “unfolding” the cube to get proper view alignment. The back view can be placed in any of these four locations.

42. How does this work on other objects? Place the object in a glass box Top view goes above Then “unfold” the box R.Side view goes to the right Front view is always central

43. What about details you can’t see? Hidden lines show details that are not seen in all views Draw hidden lines (dashed) to show the detail Project from hidden detail to the other views

44. ANIMATED EXAMPLES http://dossin.weebly.com/3-multi-- view-orthographic-projection-drawing.html

45. Multiview Drawing REVIEW An orthographic view is drawn looking straight at one side of the object (at 90 ° to it) There are 6 possible orthographic views : Front, Back, Top, Bottom, Left Side, Right Side The Front, Top, and R.Side views are usually all that are drawn Hidden lines show details you can’t see in all views

46. Centering a Multiview Drawing Review Make a sketch of the views needed for the drawing. The space between the views is 1 ½” What are the measurements needed to center the drawing? What is the overall size of the box for the views?

47. Centering a Multiview Drawing Review 1.75 1.5 1.5 6.50 3.50 3.50 11.50 6.75

48. Layout of the 6 Views Sketch the layout of the 6 views of this object and label the views. TOP FRONT REAR L. SIDE BOTTOM R. SIDE