Manual DA Display Update Procedure baru.pdf

DA 40 Display

1. DA –Updating display software Date: June 2012
Author: BD

2. DA –Updating display software
1
Starting condition: ignition ON. Engine OFF.
Enter menu by pressing respective button on display .

3. 2
DA –Updating display software
Scroll down and select “Software update”
Information
about current
software
version

4. DA –Updating display software
3
Insert USB memory stick containing software update (file extension *.tar.gz)
in the socket in right handrest side compartment.

5. DA –Updating display software
4
Press and hold two marked buttons for 5 seconds until the update process
starts.

6. DA –Updating display software
5
Software update file name is displayed.
Press arrow down to continue updating.
Update file
name and
version
number

7. DA –Updating display software
6
Confirm by pressing arrow down to continue updating.

8. DA –Updating display software
7
Updating is in process. Do not switch of machine or touch the display
buttons.

9. DA –Updating display software
8
When updating is finished, key off and on.
If you go to software update submenu, you can see t he new software
version.

10. Note:
9
The above screen can appear in case that:
- USB memory stick is not inserted or not
inserted correctly
- File not present on USB stick
- USB memory stick is not recognised by
display
Correction:
- Verify that USB memory stick is
correctly inserted
- Verify that the correct file is present
(not in separate folder but in root)
- Try using different USB memory stick

11. 10
End of the presentation