Manual Verlinde TD Drive con mención en programación de VDF

Manual Verlinde TD Drive

1. TDUV inverterand TD drive mobile application
Rev2

2. 22
NextLevelPartnership
The visualisation and the parameterssetting on
the TDUvneedto bedoneby usinga mobile
App, throughta Bluetooth connexion witha
Dongle
TDUvBluetooth
Dongle

3. 33
NextLevelPartnership
somestepsneedto befollowed:
1
-Bluetooth Donglepairingwiththe mobile phone
2
-TD drive app downloadingin the mobile phone
3
-Connexion betweenthe Bluetooth Dongleand the TD drive
4
–Parametervisualisation and setting

4. 44
NextLevelPartnership
First stepisto do the pairingbetweenthe
mobile phone and the Dongle.
Go to mobile phone bluetoothparameters
The TDUvneedto bepower on
1
-Bluetooth Donglepairingwiththe mobile phone

5. 55
NextLevelPartnership
The Dongle( TDU-…..) will appear under
the available device list
Select it
1
-Bluetooth Donglepairingwiththe mobile phone

6. 66
NextLevelPartnership
The needed code for the
pairing is visible at the back
of the dongle
MAC: xxxxx
From that code the last 6
digits need to be
considered. The letters
under that code need to be
converted as numbers
based on the following logic:
1
-Bluetooth Donglepairingwiththe mobile phone

7. 77
NextLevelPartnership
Lettersconversion logic:
A 0
B 1
C 2
D 3
E 4
F 5
So in thatcase:
DA 28 F3
30 28 53
1
-Bluetooth Donglepairingwiththe mobile phone

8. 88
NextLevelPartnership
The TDU is now available
to be connected
1
-Bluetooth Donglepairingwiththe mobile phone

9. 99
NextLevelPartnership
2
-TD drive app downloadingin the mobile phone
Search for application
“TD drive tool”

10. 1010
NextLevelPartnership
The “license Key” is
delivered with the
components
2
-TD drive app downloadingin the mobile phone

11. 1111
NextLevelPartnership
3 -
TD drive app downloadingin the mobile phone

12. 1212
NextLevelPartnership
To start the connexion
between the Dongle and
the App click on that
symbol
3 -
Connection between the Bluetooth Dongle and the TD drive

13. 1313
NextLevelPartnership
3 -
Connection between the Bluetooth Dongle and the TD drive

14. 1414
NextLevelPartnership
select the TDU now visible
select “pair New
Device”
3 -
Connection between the Bluetooth Dongle and the TD drive

15. 1515
NextLevelPartnership
You can change
the TDU name
to recognize it
directly the next
time or to
localize it
3 -
Connection between the Bluetooth Dongle and the TD drive

16. NextLevelPartnership
It can take
several minutes
to have it visible
4 -
Parametervisualisation and setting

17. 1717
NextLevelPartnership
You are now connected
to the TDU and you can
see values
Click here to get access
to the menu
4 -
Parametervisualisation and setting

18. 1818
NextLevelPartnership
4 -
Parametervisualisation and setting

19. 1919
NextLevelPartnership
88
4 -
Parametervisualisation and setting

20. 2020
NextLevelPartnership
597
4 -
Parametervisualisation and setting

21. 2121
NextLevelPartnership
EMC Filter
service instructions manual§4.4.5
If the mains network is non-grounded (IT-
network), the EMC jumper of the TDUv
must be removed

22. 2222
NextLevelPartnership
MS mode / EP mode setting
service instructions manual§12.2.5
I/O settings parameters
EPMS

23. 2323
NextLevelPartnership
Acceleration / deceleration ramp setting
service instructions manual§12.2.1General parameters
Minimum ramp(in sec) must be10% of maximum speed (in m/min)
Witha minimum of 2s whateverthe speed is.

24. 2424
NextLevelPartnership
Speeds settings
service instructions manual§12.2.1
General parameters
The minimum frequency(Low speed) cannotbeunder10Hzfor
DC brakemotorand 14Hzfor compact brakemotor.
The maximum frequency(high speed) cannotbeunder50% of
the ratedfrequencywrittenon the motorplate.

25. 2525
NextLevelPartnership
Slowdown/Stop settings
service instructions manual§12.2.5
I/O settings parameters