Microprocessor :
Microprocessor is a multipurpose
programmable logic device that reads
binary instruction from a storage device
memory and accept binary data as input
and processes the instruction for
execution.
Intel 1
st
4004 Microprocessor
µp is made up of semiconductor device is
called Integrated Circuit (IC)
IC is used for manufacturing process of
microprocessor and other IC’s.
Classification of IC’s
Bipolar IC’s Unipolar IC’s
IC’s
Parts of Microprocessor
Microprocessor is divided into the three
parts:-
1.Arithmetic Logic Unit (ALU)
2.Register
3.Control Unit.
Memory
Memory is one of the most important factor in
the microprocessor.
It is used to store the data or information in a
binary format.
Microprocessor memory
Cache Memory: A cache memory used by the
central processing unit of a computer to reduce
the average time to access memory.
The cache is a smaller, faster memory which
stores copies of the data from the most
frequently used main memory locations.
What is Bus?
A bus in computer terms, is simply a
channel over which information flows
between two or more devices.
There are three types of bus:-
1.Address bus
2.Data bus
3.Control bus
System Bus
System bus is a combination of data bus ,
address bus and control bus.
8085 Microprocessor
The Intel 8085 is an 8-bit microprocessor
introduced by Intel in 1977.
Microprocessor
8085
8085
Kit
8056
Kit
The features of INTEL 8085
It is an 8 bit processor.
It has multiplexed address and data bus.
(AD 0 -AD 7 ).
It works on 5 Volt dc power supply.
It provides 72 instructions with 5
different addressing modes.
Pin Diagram of 8085
It is a single chip with 40 pins.
Networking
What is a “Network”?
A network is a way to get “stuff” between 2 or
more “things”
Examples: Mail, phone system, conversations,
railroad system, highways, etc
Computer Network
A two or more computers are connected to each
other to exchange information and data and
also to share hardware and software
resources like Printer, Scanner, Applications
software etc.
Communication Basics
of Networks
Physically connect computers together.
Use of wires or optical cables.
The connections are called network
links.
The Physical Connection:-
Guided Media
Three most common physical links:
1.Coaxial cable
2.Twisted pair ((I.) STP & (II.)UTP)
3.Fiber-optic cable
Guided media means there is actual
physical connection between computers
Coaxial cable
One of the wires is woven of fine
strands of copper forming a tube.
Space between has a non-conducting
material.
Makes them more protected from
outside noise.
Twisted pair
Two wires twisted together.
Makes them less susceptible to acting like
an antenna and picking up radio frequency
information or appliance noise.
Telephone company uses twisted-pair
copper wires to link telephones.
Fibre-optic cable
Light is electromagnetic.
Can transmit more information down a
single strand.
Each cable can send several thousand phone
conversations or computer communications.
Wireless connections
The link is made using
electromagnetic energy that goes
through space instead of along wires
or cables.
Unguided Media
Unguided media means there is no actual
physical connection between computers.
Three types of wireless communications
commonly used in networking:
1.Infrared
2.Radio frequency
3.Microwave
Infrared:-
Commonly used in TV and VCR remote
controls.
Use infrared frequencies of electromagnetic
radiation that behave much like visible light.
Must be in the line of sight.
Often used to connect keyboards, mouse,
and
printers.
Satellite:-
Often used to communicate with distant
locations.
Must be line of sight.
Satellite communications use
microwaves.