Operations Performed on Lathe machine like turning, facing, boring,taper turning, Grooving

Explanation regarding different Operations Performed on Lathe

1. Ms.Viddya S. Patil Assistant Professor Department of Mechanical Engineering 1 Sharad Institute of Technology, College of Engineering, Yadrav- Ichalkarnji Department of Mechanical Engineering D ifferent operations performed on lathe Machine Fundamentals of Mechanical Engineering

2. 2 Content Working Principle of Lathe Machine Types of Lathe Machine Operations Turning Facing Boring Taper Turning Knurling operation Grooving

3. 3 Working Principle of Lathe Machine

4. 4 Type-1. Lathe machine operations  done either by holding the workpiece between centers or by a chuck: Turning Operation Facing Operation Chamfering Operation Knurling Operation Thread cutting Operation Filing Operation Polishing Operation Grooving Operation Spinning Operation Spring Winding Forming Types of Lathe Machine Operations

5. 5 Type-2. Lathe machine operations  which are performed by holding the work by a chuck or a faceplate or an angle plate: Drilling Reaming Boring Counter boring Taper boring Tapping Undercutting Internal thread cutting Parting-off Type-3. The operation which is performed by  using special attachments are: Grinding Milling

6. 6 Turning Straight Turning Rough Turning Shoulder Turning Eccentric turning Step Turning

7. 7 Facing Facing consist of Two operations Roughing: Here the depth of cut is 1.3mm Finishing:  Here the depth of cut is 0.2-0.1mm.

8. 8 Boring: Counter boring: Taper Boring Taper Turning:

9. 9 Knurling operation: Grooving :

10. 10 This video is prepared for academic use only .