Phase modulation

1. PHASE MODULATION
Angle Modulation

2. Phase modulation (PM) is a form of
modulation that represents information as
variations in the instantaneous phase of a
carrier wave.
Modification in phase according to low
frequency will give phase modulation.

3. PM changes the phase angle of the complex
envelope in direct proportion to the message
signal.
Suppose that the signal to be sent (called the
modulating or message signal) is and the
carrier onto which the signal is to be
modulated is
Annotated:
carrier(time) = (carrier amplitude)*sin(carrier frequency*time + phase shift)

4. This makes the modulated signal
This shows how m(t)modulates the phase –
the greater m(t) is at a point in time, the greater the
phase shift of the modulated signal at that point.

It can also be viewed as a change of the frequency of the
carrier signal, and phase modulation can thus be
considered a special case of FM in which the carrier
frequency modulation is given by the time derivative
of the phase modulation.

5. Theory
•The mathematics of the spectral behavior reveals
that there are two regions of particular interest:
•For small amplitude signals, PM is similar to
amplitude modulation (AM) and exhibits its
unfortunate doubling of baseband bandwidth
and poor efficiency.
•For a single large sinusoidal signal, PM is similar
to FM, and its bandwidth is approximately
•where is the modulation index
This is also known as Carson's Rule for PM.

6. Modulation index
As with other modulation indices, this quantity
indicates by how much the modulated
variable varies around its unmodulated level.
It relates to the variations in the phase of the
carrier signal:
where is the peak phase deviation

7. Phase modulation

8. Phase modulation
Mach-Zehnder
Interferometer with
a phase modulator
In one arm
Optical fibre version of
the same
interferometer

9. Bonus Assignment: Difference
between FM and PM
Hint:
In FM, the information of a signal is encoded in its frequency. Similarly for PM, the
information is encoded in its phase. Both modulation schemes use a carrier frequency as a
reference.
A FM modulated signal with message signal x(t) has the form
A sin(2π(fc+δ(f))t) where δf) is the frequency deviation and is a function of x(t).
A PM modulated signal with message signal x(t) has the form
A sin(2 π fc*t + p) where p is the phase and is a function of x(t).
Digital signals usually use PM as its possible to formulate orthogonal codes which provide
error correction capabilities in a noisy transmission channel.
Fm receivers are less complex. In Fm lower frequencies produce variation to the modulation
index.
Phase of the carrier is varied in accordance to the message signal in PM.
Pm receivers require proper synchronization so it is complex. Modulation index is
independent of audio frequency.

10. Bonus Assignment: Difference
between FM and PM
Hint:
In FM, the information of a signal is encoded in its frequency. Similarly for PM, the
information is encoded in its phase. Both modulation schemes use a carrier frequency as a
reference.
A FM modulated signal with message signal x(t) has the form
A sin(2π(fc+δ(f))t) where δf) is the frequency deviation and is a function of x(t).
A PM modulated signal with message signal x(t) has the form
A sin(2 π fc*t + p) where p is the phase and is a function of x(t).
Digital signals usually use PM as its possible to formulate orthogonal codes which provide
error correction capabilities in a noisy transmission channel.
Fm receivers are less complex. In Fm lower frequencies produce variation to the modulation
index.
Phase of the carrier is varied in accordance to the message signal in PM.
Pm receivers require proper synchronization so it is complex. Modulation index is
independent of audio frequency.