PPEs in Construction Industry with its importance

PPE In Construction Industry

1. Personal Protective Equipment (PPEs)

2. Personal Protective Equipment 2 Definition: Devices used to protect an employees from injury or illness resulting from contact with chemical , radiological, physical, electrical, mechanical, or other workplace hazards (OSHA) The need for PPE and the type of PPE used is based on hazard present; each situation must be evaluated independently

3. Some Caveats 3 PPE is used as a last resort The use of PPE signifies that the hazard could not be controlled by other methods, such as: administrative controls (i.e., shift rotation) engineering or industrial hygiene controls

4. Engineering & IH Controls 4 Design (remove hazard from process) Substitution (of less hazardous materials) Process modification (how and where) Isolate the process or the worker Wet methods for dust reduction Local exhaust ventilation (at source) Dilution ventilation (area) Good housekeeping

5. Back to the caveats... 5 The use of PPE signals that the hazard still exists in the workplace Unprotected individuals in the same area will be exposed Failure of PPE means that the worker will be exposed PPE can be combined with other controls

6. So, what is it??? 6

7. PPE Head protection Eye and Face protection Hearing protection Respiratory protection Arm and Hand protection Foot and Leg protection Protective clothing 7

8. Head Protection 8

9. Hard Hats work by dissipating force 9

10. 10

11. Eye Protection 11

12. Eye Protection 12 Common Uses: Impact Protection Chemical Hazards Radiation Protection welder’s goggles laser goggles UV Infrared

13. Eye Protection - Selection 13 Visitor specs are only appropriate for non- employees with no true exposure to hazards Safety glasses are used to protect the eyes from flying objects (no face protection) Chemical splash goggles protect against fluids by sealing tightly against the face Face shields provide highest level of protection

14. Face Shield - the highest level of face protection 14

15. Hearing Protection 15

16. Hearing Protection Basics 16 Noise induced hearing loss can occur with exposures >90 dBA A hearing conservation program becomes a requirement at exposures >85dBA Higher levels of noise exposure have shorter allowable exposure times

17. Noise levels versus Duration 17 Sound Level (dBA) Exposure (hours) 90 8 92 6 95 4 100 2 105 1 110 0.5 115 0.25

18. Hearing Protection 18 Rule of Thumb - if you cannot carry on a conversation in a normal tone of voice with someone at arm’s length, you are likely near 90dBA All hearing protection devices should have a Noise Reduction Rating (NRR) = # of decibels they will reduce noise levels Be conservative when using NRRs

19. A couple examples 19 Example 1 Ear plugs with NRR of 25 dBA exposure = 105 dBA 105 minus 25 = 80 dB therefore okay Example 2 same plugs exposure = 125 dBA 125 minus 25 = 100 dB not acceptable; must be below 90 dB

20. Hearing Protection - Types 20 Ear Plugs - less expensive, disposable, good ones have fairly high NRRs - sometimes difficult to tell if employees are wearing them Ear Muffs - more expensive, more durable, typically higher NRRs than plugs, more obvious Can be used together in very high noise areas

21. Arm and Hand Protection 21

22. Gloves - Typical Uses 22 Chemical protection Biohazard protection Abrasion protection Friction protection Protection from extremes of heat and cold

23. Gloves - more caveats 23 No glove is good against all hazards; consult laboratory safety link on EHS web page for glove selection chart Gloves have a finite lifespan and must be periodically replaced When donning gloves, examine them for signs of tears, cracks, holes and dry rot Hands should always be washed after removing gloves

24. Handwashing and Gloves 24

25. Foot and Leg Protection 25

26. Protective Footwear 26 Steel- toed footwear, preferably with metatarsal guards, is used to protect feet from crushing injuries caused by heavy objects Rubber boots are often used to protect feet from exposure to liquids Chaps or leggings are used in certain applications (i.e., using a chainsaw)

27. Other Protective Clothing 27

28. Other Protective Clothing 28 Used to protect street clothes from hazards in the workplace Often hazard specific To be considered effective, protective clothing must prevent the contaminant from reaching the clothing or skin of the wearer!

29. Respiratory Protection 29

30. Respiratory Protection 30 Protects users by removing harmful materials that may enter the body via the lungs Inhalation is one of the quickest, most efficient ways to introduce lethal levels of hazardous materials into the body

31. Respiratory System 31

32. Respirators - types 32 Air Purifying Respirators (APR) Half-face Full Face Powered Air Purifying Respirators (PAPR) Self Contained Breathing Apparatus (SCBA)

33. Respirators 33 Does not include: surgical masks dust masks N- 95 respirators are a special class of respiratory protection primarily used in the health care field

34. Respirators - A Big Caveat!!! 34 Employees should not wear a respirator unless they have been medically cleared to do so! This clearance may take the form of a questionnaire, physical examination, pulmonary function testing, chest X-Ray, or a combination of the above

35. Why? 35 Respirators put additional resistance against the respiratory system of the wearer Persons with undiagnosed respiratory system or cardiovascular problems could trigger a serious medical problem (respiratory distress, asthma, heart attack, etc.) by using a respirator

36. Respirators are incompatible with facial hair 36

37. Facial hair… 37 The respirator cannot form a tight seal against the cheeks and chin, resulting in air leaks which can allow airborne contaminants to be inhaled Specially designed PAPR hoods can be used for employees with facial hair small amounts of facial hair that fit inside of the respirator face piece are acceptable

38. PPE Usage 38 PPE that is required to safely conduct University work should be purchased by the work unit Supervisors are responsible for ensuring that PPE is available and worn Employees are responsible for wearing & maintaining PPE, and reporting worn or defective PPE to their supervisor

39. Recap 39 PPE is hazard specific; the hazards of each workplace and task must be evaluated PPE is used as a last resort when the hazard cannot be controlled by other methods Supervisors are responsible to ensure it is available and worn; Employees must wear and maintain their PPE

40. Recap 40 PPE is only considered effective if it prevents the contaminant from reaching the wearer Respirators should not be worn by employees unless they have been medically cleared to do so

41. Dressed for Success! 41

42. For additional information on PPE... 42 Check the EHS contact EHS directly