Set Router/Wi-fi/Wireless Access Point/ Repeater Configuration.pptx

HoneyDianaMejia1 65 views 41 slides Mar 12, 2025
Slide 1
Slide 1 of 41
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15
Slide 16
16
Slide 17
17
Slide 18
18
Slide 19
19
Slide 20
20
Slide 21
21
Slide 22
22
Slide 23
23
Slide 24
24
Slide 25
25
Slide 26
26
Slide 27
27
Slide 28
28
Slide 29
29
Slide 30
30
Slide 31
31
Slide 32
32
Slide 33
33
Slide 34
34
Slide 35
35
Slide 36
36
Slide 37
37
Slide 38
38
Slide 39
39
Slide 40
40
Slide 41
41

About This Presentation

Set Router/Wi-fi/Wireless Access Point/ Repeater Configuration


Slide Content

SETTING UP CONNECTION USING A ROUTER

Step 1 : Plug in the power cord of the router to the power source and turn it on.

Step 2. Reset the router by pressing the reset button for at least 5 to 10 seconds.

Step 3 . Plug in LAN cable to LAN port in your computer

Step 4 . Plug the other end of the UTP/LAN cable to any of the 4 Ethernet ports of the router.

Step 5 . Plug the LAN cable from your modem , to the internet port in your router.

Configuring the Router

https://emulator.tp-link.com/EMULATOR_wr840nv4_eu/index.htm

Here are the steps to know the IP address of the router:

3. Open a Web Browser and type in the IP address in the address bar.

Quick Setup

4. Then it will prompt you that the router will reboot . Just click Reboot button.

Configure router LAN IP Address Why are we doing this?

Go to Network and click LAN . Then change the details of the IP address.

2. Browser will prompt that the router will reboot. Just click okay. It will ask you to login again. 3. Go to the DHCP tab and change the start IP Address and End IP address, then click Save.

4. Check if the change in the gateway’s IP address took place by issuing ipconfig command again in the command prompt.

Change router login data ( username and password )

Router password and Wi-Fi passwords are different.

1. Click system tools and choose password 2. Then input the default username and password and input the new username and password .

Click the save button and the browser will ask you to log in again with the new User Name and Password this time.

Connect network to a router

1. Simply connect a UTP cable from one of the ports of your switch to one of the LAN ports to your router. 2. Configure your Ethernet network to Obtain IP address. The router will automatically assign an IP address for your computer.

Practice your skills. Put a check mark on the box if you have accomplished each item below.

( Performance Task)

Choose the letter of the correct answer. Write your answer on a separate sheet of paper.

PT
Tags