Sewage Sludge Treatment

Hydra Bio Sludge Buster contains a powerful blend of aerobes and enzymes for better sewage treatment. The product is ideal for animal farms to treat sewage, sludge and liquefy compacted feed.
More details: http://grease-eater.co.uk/sludge-and-sewage-treatment.html

1. Reduces harmful gases (ammonium levels)
Suppression of crusts in the pits
Breaks down and recovers organic material (accelerates the natural process)
Easy emptying of the pits for easy application on crops

Organic waste is made up of proteins, carbohydrates, fatty materials and fibres, which solidify making it
d
ifficult to liquefy and reduce them. These insoluble solids and suspensions are particularly difficult to
break do
wn. As a result, the solid build up and cake must be liquefied outside the bacterial cells and
through the action of enzymes segregated by special bacteria.

Aerobic and Anaerobic Bacteria
Bio Sludge Buster is a mixture of aerobic and anaerobic bacteria necessary for the molecular metabolism
of
the organic waste. It works as a biological activator that breaks down the residual organic matter by
enzyma
tic means. In essence, a biological chain reaction begins that can continue until all the organic
ma
terial has disappeared.

Powerful Formula
Bio Sludge Buster contains materials that increase the activity of the enzymes, such as salts, humectants,
energe
tic products that catalyse and accelerate decomposition reactions and humidifiers to increase the
con
tact between enzymes and the waste materials. The formula of complies with the principle of waste
re
tention until the bacteria can digest the solid materials. In this way, only the materials made soluble can
f
low from the pit or be easily absorbed.

Dilution Rate
1 kilo Bio Sludge Buster per 50 m³ of slurry. This dose is recommended as a first load, repeat dosing to be
app
lied every 25 days. The doses are by way of guidelines, as in each case it is necessary to consider the
charac
teristics of each pit or drain, as well as the volumes.

Directions for Use:

Dissolve Bio Sludge Buster in warm water not exceeding 40ºC in a drum and leave to rest for 20 minutes,
30 a
t most. For large storage systems stir and add as much water as possible to dilute and spread or mix
over
the tank surfaces. Temperature enhances the action of B io Sludge Buster provided it does not exceed
40
ºC. The lower the temperature, the lower the speed with which the waste is broken down.
Bio Sludge Buster
Bacteria / Enzyme Treatment - Farm Wastes
Liquefies Farm Sewerage & Compacted Feed

Hydra International Limited
Cerberian House, Carters Lane,
Kiln Farm, Milton Keynes MK11 3ER, U.K.
Te
l: 01908-265889 Fax: [phone]
E
mail: [email protected] Web Site: www.hydra-int.com
Accelerates Breakdown of Organic Material
Clears Blockages & Prevents Blinding Screens
Considerably Reduces Bad Odours & Flies

2. Material Safety Data Sheet
All the information on this sheet relates to the concentrated product only, in use dilution will decrease any possible hazard significantly.
Manufacturer
Hydra International Ltd
Milton Keynes MK11 3ER UK
Tel: [phone] Fax: [phone]
E-
mail: [email protected] Web Site: www.hydra-int.com
1. IDENTIFICATION Bio Sludge Buster
2. COMPOSITION A powder blend of Bacillus sp and Pseudomonas sp, Cellulase / Protease / Amylase / Lipase, Activators
and
Surfactants.

3. HAZARDS IDENTIFICATION Persons with known respiratory disorders (eg asthma) should avoid inhalation of the powder.
The produc
t contains enzymes so there is a risk of sensitisation reactions in certain susceptible individuals
4. FIRST AID MEASURES



EYE S Flush with copious amounts of water
SKIN Wash with soap and water
INHALATION In
the event of excessive inhalation, remove to fresh air and obtain medical advice.
Non-
toxic, but if in doubt seek medical advice
INGE
STION In the unlikely event of ingestion seek medical aid immediately
G
ive nothing by mouth to an unconscious person

In a
ll cases, if symptoms persist, seek immediate medical advice


5. FIRE HAZARD &
FIRE FIGHTING PROCEDURES
Any ex
tinguishing media may be used but should be appropriate to the cause of the fire. Low degree of
r
isk due to thermal decomposition
6. ACCIDENTAL RELEASE

MEASURES
In
the event of accidental spillage, sweep up and wash away remainder with plenty of water
7. HANDLING AND STORAGE Store product in a cold dry place.
Prolonged storage in fridge or deep freeze.
Protect from light, raised temperature and humidity.

8. EXPOSURE CONTROLS AND
PERSONAL PROTECTION



RESPIRATORY PROTECTION Wear resp iratory protection to avoid breathing in dust
VENTILATION No
t applicable
PROTECTIVE GLOVES Wear PVC or Rubber Gloves as appropriate
EYE
PROTECTION Wear goggles if task or application method could result in
eye con
tact from accidental splash or spray
OCCU
PATIONAL EXPOSURE LIMIT Not applicable

9. PHYSICAL AND CHEMICAL

PROPERTIES




PHYSICAL STATE Powder
COLOUR Pale Tan
ODOU
R Slight
FLASHPOINT Non Flammable
SOLUBILITY Water Soluble
DEN
SITY 51g/100 cm3
SOLUBILITY IN WATER 100 gm/100 ml (at 25°C)
pH VALUE 4.5-5.5 (10 gm
/100 ml at 20°C)
10. STABILITY & REACTIVITY DATA


CHEMICAL REACTIVITY Not applicable
STORAGE STABILITY The stability of the bacteria is dependent upon the storage
cond
itions, see Sec.7.
A
ll other constituents are stable under normal storage conditions.
HAZA
RDOUS DECOMPOSITION
AND
COMBUSTION PRODUCTS Not applicable
11. TOXICOLOGICAL INFORMATION



EYE S Irritant
SKIN Irritant
INHALATION May cause
irritation to mouth, throat and digestive tract
INGE
STION May cause irritation to mouth, throat and digestive tract
No
toxic effect on the rat (2000 mg/kg)
L
imit test for acute oral toxicity (Annex V, EEC Commission Directive)
12. ECOLOGICAL INFORMATION Na turally occurring saprophytic, non hazardous bacteria on readily biodegradable base
13. DISPOSAL CONSIDERATION Flush away with water
14. TRANSPORTATION INFORMATION No t dangerous for transport
15. REGULATORY INFORMATION

RI SK PHRASES

SAFETY PHRASES

HAZARD SYMBOL
LA
BELLING INFORMATION

None

None

None

16. OTHER INFORMATION 1s t Sept 2008
The
information contained in this document is provided in accordance with the requirements of Chemicals (Hazard Information & Packing) Regulations. The product should not be
used for any purpose o
ther than as stated on the label without obtaining specific written instructions directly from the supplier’s Head Office. As specific conditions of use are outside
the supplier’s control the user is responsible for ensuring the requirements of relevant legislation are complied with. The user assumes all liability for damage or injury caused from
abnorma
l use, failure to follow recommended practices & any hazard inherent in the nature of the product.