Sim8085 for traffic light operation system

🚦 traffic light and 8085simulator

1. VLAN CONCEPTS AND CONFIGURATION

2. VLAN CONCEPTS VLAN stands for Virtual LAN. A VLAN is a way of logically separating a group of computers into a separate network. 

3. BENEFITS OF VLAN E ase of administration , Confinement of broadcast domains, R educed network traffic, and Enforcement of security policies

4. TYPES OF VLAN DEFAULT VLAN DATA VLAN MANAGEMENT VLAN NATIVE VLAN

5. DEFAULT VLAN

6. DEFAULT & DATA VLAN

7. DATA VLAN

8. DATA VLAN

9. POINT TO NOTE After assigning the VLAN to PC then two Pcs can not communicate because they are in a separate VLAN, When you ping the other PC you will get time out means there is no communication

10. DEFAULT DATA AND MANAGEMENT VLAN

11. DEFAULT DATA AND MANAGEMENT VLAN

12. VLAN TRUNK CONFIGURATION

13. VLAN TRUNK CONFIGURATION

14. VLAN TRUNK CONFIGURATION

15. VLAN TRUNK CONFIGURATION The same configuration is done on the other switch

16. COMMAND TO SHOW TRUNK INTERFACE show interfaces trunk

17. NATIVE VLAN (UNTAGGED TRAFFIC) If the device is not compatible to CISCO it wont work on the tagged frame (trunk mode) The switches should be configured as a native VLAN in order to allow the data to pass through the trunk. (it wont support 802.1Q protocol)

18. NATIVE VLAN

19. NATIVE VLAN CONFIGURATION

20. NATIVE VLAN CONFIGURATION

21. NATIVE VLAN CONFIGURATION Type the command below to show the interfaces:

22. NATIVE VLAN CONFIGURATION

23. COMMAND TO SHOW THE TRUNK INTERFACE

24. NATIVE VLAN CONFIGURATION

25. CONTENT COVERED DEFAULT VLAN DATA VLAN MANAGEMENT VLAN NATIVE VLAN CONFIGURATION TRUNK CONFIGURATION