Soft gelatin capsule

soft gelatin capsule

1. PRESENTATION ON SOFT GELATIN CAPSULE

2. Submitted to Yesmin Begum Assistant professor Department of pharmacy Submission Date:09/05/2018 Submitted by Md. Rakibul Islam ID.2016000300008 Btach:27th Sec: “A” Course Code: BPH-3011 Course Title: Pharmaceutical Technology-II

3. Introduction Soft Gelatin capsules are one piece, hermetically sealed, soft gelatin shells containing a liquid, a suspension, or a semisolid. Soft gelatin capsules are a unique drug delivery system that can provide distinct advantages over traditional dosage forms such as tablets, hard gelatin capsules and liquids

4. Advantages: Improved bioavailability Enhanced drug stability Superior patient compliance Product differentiation by colour , size and shape Easy to swallow Uniformity and precision dosage Limitations: Equipment Higher manufacturing cost as compared to tablets Stability concerns with compounds susceptible to hydrolysis

5. Shape and Size of Soft Gelatin Capsule Oblong Soft Gelatin Capsules Round Soft Gelatin Capsules

6. Liquid which may be encapsulated into soft gelatin capsules include : Water immiscible, volatile and nonvolatile liquids such as vegetable and aromatic oils aromatic and aliphatic hydrocarbons, chlorinated hydrocarbons , ethers , esters, alcohol and organic acids. Water miscible, nonvolatile liquids such as polyethylene glycols, and nonionic surface active agents as polysorbate 80 Water miscible and relatively nonvolatile compounds , as propylene glycol and isopropyl alcohol, depending upon factors as concentration used and packaging conditions.

7.   The gel is prepared in a 300-litre stainless steel vessel. Gelatin powder is mixed with water and glycerin. Heating Stirring The molten gelatin mass is formed. It is decanted into 200-kg mobile vessels Turbine mixing where colors and flavors can be added Gelatin Mass Manufacture:

8. Capsule shell composition: Water: 45% w/w. The ratio by weight of water to dry gelatin can vary depending from 0.7-1.3 (water) to 1 .0 (dry gelatin) depending on the viscosity of the gelatin being used. Plasticizer: Used to make the soft gel shell elastic & pliable. Ratio used is between 0.3- 1.8 for soft to hard shell on dry basis. Plasticizer usually used : Glycerin and sorbitol . Coloring Agent: Color may be natural or synthetic . Opacifier : Usually used is titanium dioxide. Concentration of opacifier may be up to 0.5% . Chelating agents: Iron is always present in raw gelatin & should not contain iron more than 15 ppm . Gelatin

9. Formulation :   Formulation for soft gelatin capsules involves liquid, rather than powder technology. Materials are generally formulated to produce the smallest possible capsule consistent with maximum stability, therapeutic effectiveness and manufacture efficiency. The liquids are limited to those that do not have an adverse effect on gelatin walls. Emulsion can not be filled because water will be released that will affect the shell Formulation  

10. Manufacture process: (A) Plate process : The process involved-: Placing the upper half of a plasticized gelatin sheet over a die plate containing numerous die pockets, Application of vacuum to draw the sheet in to the die pockets, Filling the pockets with liquor or paste, Folding the lower half of gelatin sheet back over the filled pockets, and Inserting the “ sandwich” under a die press where the capsules are formed and cut out

11. (B) Rotary die press: In this process, the die cavities are machined in to the outer surface of the two rollers. The die pockets on the left hand roller form the left side of the capsule and the die pockets on the right hand roller form the right side of the capsule. Two plasticized gelatin ribbons are continuously and simultaneously fed with the liquid or paste fill between the rollers of the rotary die mechanism. As the die rolls rotate, the convergence of the matching die pockets seals and cuts out the filled capsules.

12. (C) Accogel process: In general, this is another rotary process involving A measuring roll, A die roll, and A sealing roll. As the measuring roll and die rolls rotate, the measured doses are transferred to the gelatin-linked pockets of the die roll. The continued rotation of the filled die converges with the rotating sealing roll where a second gelatin sheet is applied to form the other half of the capsule. Pressure developed between the die roll and sealing roll seals and cuts out the capsules .

13. (D) Bubble method :  A concentric tube dispenser simultaneously discharges the molten gelatin from the outer annulus and the liquid content from the tube. The liquids are discharged from the concentric tube orifice into a chilled-oil column as droplets that consists of a liquid medicament core within a molten gelatin envelop. The droplets assume a spherical shape under surface tension forces and the gelatin congeals on cooling. The finished capsules must be degreased and dried

14. Drugs commercially prepared in Soft Gelatin capsules: Ethychlorvynol (Placidyl) Demeclocycline HCl ( Declomycin ) Chlortrianisene (TACE) Digoxin ( Lanoxicaps ) Docusate calcium ( Surfak ) Vitamin E

15. References: www.capsugel.com formulation.vinensia.com capteksoftgel.com www.saintytec.com medium.com