Source One All kinds of Hoses

Source One offers all kinds of Hose Products including Industrial Hoses, Hydraulic Hoses, Rubber Hoses and Stainless Steel flexible hoses and hose fittings.

1. Introduction
http://www.sourceone.me

2. Outline
•About us
•Products
- Industrial Rubber Hoses
- Hydraulic Hoses
- Stainless Steel Corrugated hoses
- End Fittings – SS Hoses/ Camlock Couplings
- End Fittings – Rubber/ Hydraulic Hoses
•Selection Criteria - Hoses
•Installation of Hoses
•Services
•Contact Us

3. About Us
•SourceOne is a market-leading hose solutions provider for it’s
customers, delivering quality products on time.
•SourceOne is led by experts in Fluid Transfer solutions with several
years of industry experience.
•Our manufacturing partners provide unique design and
manufacturing engineering capabilities to optimize customer value.
•With wide operating pressure ranges, optimal levels of abrasion
resistance, long-lasting durability and high-performance transfer
capabilities, SoureOne hoses and hose fittings provide the ultimate
fluid conveyance solutions for a variety of equipments and
applications around the world.

4. Products…

5. Industrial Rubber Hoses
Types and Applications
•Air/ Water Hose
•Pneumatic Tool Hose
•Rock Drill Hose
•Concrete Transfer Hose
•Steam Hose
•Wash Down Hose
•Super Spray Hose
•Petrol Dispensing Hose
•CNG Hose

•Chemical Hose
•Sandblast Hose
•Carbon Free Hose
•Water Suction and Discharge
•Oil Suction and Discharge
•Brewery and food hose
•Welding/ Gas Cutting hose
•LPG Hose

6. Hydraulic Hoses
We supply hydraulic hose that meets SAE domestic and DIN
international standards. Our high-pressure hydraulic hose
brands feature three-layer construction to ensure strength,
flexibility, and proper pressure maintenance.
Braided Hydraulic Hoses Types
•Wire braided hose SAE100 R1
•Wire braided hose SAE100 R2
•One fibre braided hose SAE100 R6
•Two fibre braided hose SAE100 R3
• One fibre braided hose SAE100 R5
Spiral Hydraulic Hoses Types
•Spiral Wire hose 4SH
•Spiral Wire hose 4SP
•Spiral Wire hose SAE 100 R12
•Spiral Wire hose SAE 100 R4
• Spiral Wire Hose SAE 100 R15

7. Stainless Steel Corrugated Hoses
•Metallic Flexible Hoses & Hose Assemblies
•AISI 321, 316L, 304 grades
•Oxygen and Water lancing Hose Assemblies
•Hose Size Range from 6mm to 300mm NB & Braiding
types of 24, 36, 48 ,64, & 96 carriers
•Our Hose Assemblies, conform to BS6501 Part-1 and ISO
10380 standard.
•Assemblies made by TIG welding of Stainless steel /
Carbon steel end connections.

8. End Fittings – SS Hoses

9. End Fittings – Camlock Couplings
Type A Type C Type D
Type E
Type F
Type DC
Type DP
Type B
• Available in Stainless Steel – SS304/ SS 316, Brass and Aluminium
• Available is sizes: ½”, ¾”. 1”, 1.1/4”,1.1/2”,2”, 2.1/2”,3”,4”,5”,6” & 8”

10. End Fittings – Rubber/ Hydraulic Hoses

11. Selection Criteria - Hoses
Use STAMPED
S – Size
T- Temperature
A – Application
M – Material to be conveyed
P – Pressure
E – Ends or Couplings
D – Delivery (Volume &
Velocity)

12. Installation of Hoses
Flexible hoses can be classified into two broad categories, viz., Rubber hoses and Metallic hoses. The
selection of the hoses is made depending upon the service conditions (pressure, temperature and
other environmental conditions)
• Under pressure, a hose may change in length. Always provide some slack in the hose to allow for
this shrinkage or expansion. (However, excessive slack in hose lines is one of the most common
causes of poor appearance).
• If a hose is installed with a twist in it, high operating pressures tend to force it straight. This can
loosen the fitting nut or even burst the hose at the point of strain.
• At bends, provide enough hose for a wide radius curve. Too tight a bend pinches the hose and
restricts the flow. The line could even kink and close entirely. In many cases, use of the right
fittings or adapters can eliminate bends or kinks.
• In applications where there is considerable vibration or flexing, allow additional hose length. The metal
hose fittings, of course, are not flexible and proper installation protects metal parts from undue
stress, and avoids kinks in the hose.
• When 90 deg. adapters are used, the assembly becomes neater looking and easier to inspect and
maintain. It uses less hose, too.
• Hose assemblies in service should be inspected frequently for leakage, kinking, corrosion, abrasion or
any other signs of wear or damage. Hose assemblies that are worn or damaged should be removed
from service and replaced immediately.

13. Services
We offer the following services to our customers;
Supply of top quality hoses and/or end fittings from our reputed
manufacturing partners.
•Quality Control and delivery adherence of your nominated or regular
vendors.
•Negotiate prices to the best possible. Meet the client’s targets.
•Constant monitoring of the manufacturing of products, their quality
and delivery status.
•We can support customer visits to a set of Indian Vendors based on
requirements.
•Offer savings in the logistics, shipping costs to clients.

14. Contact us TODAY!
Contact Person: Gaurav Gupta
Mobile: [phone]
E-mail: [email protected]
Web: http://www.sourceone.me

Address:
120 Munirka Vihar,
New Delhi – 110067
INDIA.