SPAL All New - Brushless Catalogue

SPAL High Performance Sealed Brushless Motor Fans & Blowers 12V & 24V

1. 12V - 24V dc/cc HIGH-PERFORMANCE
SEALED BRUSHLESS
MOTOR FANS & BLOWERS

3. We always strive to perform at the highest
standards possible.
We are convinced that quality,
innovation and service are cornerstones that
guide our culture while building our legacy.
On these cornerstones SPAL has earned its
credibility over the years, becoming an ideal partner to design, ma-
nufacture and market ventilation
solutions in an epanding array of applications.

Alessandro Spaggiari

4. TECHNICAL KNOWLEDGE
• Fluid-dynamics
• Thermodynamics
• Electronics
• Electro-magnetic
• Mechanical
IN-HOUSE TESTING AND VALIDATION
EQUIPMENT
• Climatic chambers
• Thermal shock chamber
• Oven & hot test chambers
• Water & salt spray chamber
• Vibration test benches
• Vibration test bench in climatic chamber
• Airflow test chambers
• Anechoic chamber with spectrum analyzer
• Endurance test facility
• Motor torque test bench
• 3D tester
• Laser sintered prototype machine
• EMC test equipment

FULLY INTEGRATED PROCESSES
• Rapid prototyping
• Chemical Department
• Tool shop
• Moulding
• Motor design and production
• PCB In-house Production
• Electronics SMD
• Automated assembly process
The SPAL Strengths

5. The SPAL production facility in Correggio, Italy, spans an area of
66,000m² accommodating over 500 employees serving the engineering,
research & development, and manufacturing departments.

6. 4
The fan models are listed by decreasing fan diameter, and within the same diameter, in decreasing power rate.
It is customer’s responsibility to verify that the selected product and/or the one we suggest from our catalogue suits
the technical requirements and working conditions according to customer’s application.
INDEX

Shroud pages
Axial 405 mm (16”)
VA117
VA97
10
12
Axial 385 mm (14”)VA91 14
Axial 355 mm (14”)VA116 16
Axial 305 mm (12”)VA89 20
Axial 280 mm (11”)VA99 22
Axial 255 mm (10”)VA109 24
Centrifugal 020020 26
12V
General Warranty Conditions pages 6
Recommendations for use of Axial and Centrifugal Blower
pages 7
Ø

7. 5

Shroud pages
Axial 405 mm (16”)
VA97 30
Axial 305 mm (12”)
VA113
VA89
32
34
Axial 280 mm (11”)VA99 38
Axial 255 mm (10”)VA109 40
Centrifugal 020020 42
Single wheel blower without housing 44
Ø
24V
INDEX
DRIVE CONTROLMODES pages 48
ACCESSORIES
pages 54
In case you are unable to find a suitable fan for your application, please contact us and we will help you find the best
solution for your specific requirements. Upon request, we will support you in co-designing and developing new products
and solutions.
Our technical specification are purely indicative and might change without any previous notice.
INDEX

8. 6
All SPAL fan/blower modules are GUARANTEED free from defects FOR 36 MONTHS.
Validity of the Warranty remains subject to the following conditions:
1) WARRANTY expires 36 months after the shipment date from SPAL Automotive.
2) the main label on the product (with indication Q.C. - Quality Control) must remain
stuck to validate the warranty (the WO number - Work Order of production - is a
SPAL internal increasing number which allows SPAL to trace the production lot
details);
3) warranty is valid for production defects only; defects and/or malfunctions caused
by incorrect application or damage during transit and handling are not included;
4) warranty is not valid for malfunctions caused by normal wear and tear of the unit.
5) the product must not be disassembled, modified or anyhow manipulated;
6) SPAL Automotive reserves the right to inspect the part prior to accepting a warranty
claim
7) for claims which fall under the general warranty conditions, SPAL Automotive will
issue a credit note for the corresponding value of the part; no other costs will be
accepted.
Note: General fan/blower working conditions must be in line with what specified in
the product data sheet. Please request SPAL for detailed product data sheet before
selecting any item from the catalogue.
General Warranty Conditions

9. 7
RECOMMENDATIONS FOR THE USE OF AXIAL
FAN MODULES WITH BRUSHLESS MOTORS
-In order to maximize product life, the power supply must be rectified
and stabilized with residual RIPPLE values of less than 1%. Higher
RIPPLE values will considerably reduce motor life and cause anomalous
operation. In case of application with higher RIPPLE values expected,
please contact Spal at [email protected]
-For applications in which the fan module is mounted horizontally, you
are required to use a fan blade with drain holes to allow water drainage
(available upon request).
-For a proper protection of the fan module, use an external fuse correctly
rated for every installed fan in order to interrupt the power supply in
case of accidental blockage. This is an indispensable protection for wire
harness and motor.
-For fan modules driven by an electronic speed control (linear, PWM or
any other external speed control), please ensure that the external power
supply is cut off in case of overload conditions such as partial or total
blockage and over temperature.
-The electronic fan controller must be compatible to our products.
Contact Spal at [email protected] for additional information.
-It is sole customer’s responsibility to verify the environmental
conditions for the proper use of the fan module. Contact Spal at info@
spalautomotive.com for additional information.
-It is sole customer’s responsibility to adequately protect the system
and the fan against overload conditions or accidental rotor blockage.
- It is sole customer’s responsibility to verify that the selected product
suits the technical requirements and working conditions according to its
own specifications and application. In case of customer specific request,
we will be pleased to support him to detect the best possible solutions;
however SPAL will not release any declaration or guarantee regarding
the suitability of the selected item. Full responsibility and liability
remains with the customer.
-For any product update, please refer to www.spalautomotive.com
-Never use blower modules in flammable, combustibles or blowing
environments
.
- Failure to strictly follow these recommendations could cause
the product to fail, resulting in a fire, severe personal injury or
even death.
- Should you have any questions, contact SPAL at info@spalautomotive.
com
RECOMMENDATIONS FOR THE USE OF
CENTRIFUGAL BLOWER MODULES WITH
BRUSHLESS MOTORS
-In order to maximize product life, the power supply must be rectified
and stabilized with residual RIPPLE values of less than 1%. Higher
RIPPLE values will considerably reduce motor life and cause anomalous
operation. In case of application with higher RIPPLE values expected,
please contact Spal at [email protected]
-For a proper protection of the blower module, use an external fuse
correctly rated for every installed fan in order to interrupt the power
supply in case of accidental blockage. This is an indispensable protection
for wire harness and motor.
-For blower modules driven by an electronic speed control (linear, PWM
or any other external speed control), please ensure that the external
power supply is cut off in case of overload conditions such as partial or
total blockage and over temperature.
-The electronic fan controller must be compatible to our products.
Contact Spal at [email protected] for additional information.
-It is sole customer’s responsibility to verify the environmental
conditions for the proper use of the fan module. Contact Spal at info@
spalautomotive.com for additional information.
-It is sole customer’s responsibility to adequately protect the system
and the fan against overload conditions or accidental rotor blockage.
-It is sole customer’s responsibility to verify that the selected product
suits the technical requirements and working conditions according to its
own specifications and application. In case of customer specific request,
we will be pleased to support him to detect the best possible solutions;
however SPAL will not release any declaration or guarantee regarding
the suitability of the selected item. Full responsibility and liability
remains with the customer.
-For any product update, please refer to www.spalautomotive.com
-Never use blower modules in flammable, combustibles or blowing
environments
.
- Failure to strictly follow these recommendations could cause
the product to fail, resulting in a fire, severe personal injury or
even death.
- Should you have any questions, contact SPAL at info@spalautomotive.
com

11. HIGH-PERFORMANCE
SEALED BRUSHLESS MOTOR FANS & BLOWERS 12V 12V

12. 10
Motor designed for IP6K9K and IP68 protection
Ø 405 mm
Ø 16”
VA117-ABL506P-103A
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm
12V
PRODUCTS
high
Performance
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n 7158-3035 7158-30357158-3030-507158-3030-50
Pin p/n 7114-3250 7114-32507114-4102-027114-4102-02
Section [mm2] 6.0 6.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
2. BLACK WIRE
SECT. 6.0 mm
2
4. WHITE WIRE
SECT. 0.5 mm
2
-
3. YELLOW WIRE SECT. 0.5 mm
2
1. RED WIRE SECT. 6.0 mm
2
+
R8
315.5
= =
432.5
= =
432.5
= =
315.5
= =
441
(*) 430
10
15.5
80.4
N°4 HOLES 8
FAN ROTATION
P
OPIT ATTEHCITE
EPYT LEBAL

13. 11
12V
VA117-ABL506P-103A
Ø 405 mm
Ø 16”
0
5
10
15
20
25
30
35
40
45
50
55
60
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
425
450
475
500
1300 1500 1700 1900 2100 2300 2500 2700 2900 3100 3300 3500 3700 3900 4100
———Current [A]  —∙ —Eficiency [%] 
Pressure [Pa]
Airfow [m³/h]

Axial fan performance curve
Features
Max fan speed rpm 2800
Min fan speed rpm 700
Sound pressure level dBA 72.8 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 3.10
Operating supply voltage range V 9.0 .. 16.0 at the Drive Connector
Supply voltage to reach max speed V 13.0 .. 16.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +120
Speed derating threshold °C +105 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 17
Load dump protection (Pulse 5b) V 35 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm

14. 12
15.5
315.5
= =
315.5
= =
432.5
= =
432.5
= =
417
78.4
441.5
(*)430
10
R8
53.5
N4 FORI 7.5
N4 HOLES 7.5
SENSO ROTAZIONE
FAN ROTATION
OPIT ATTEHCITE
EPYT LEBAL
Motor designed for IP6K9K and IP68 protection
VA97-ABL322P/N-103A
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm
12V
PRODUCTS
high
Performance
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n 7158-3035 7158-30357158-3030-507158-3030-50
Pin p/n 7114-3250 7114-32507114-4102-027114-4102-02
Section [mm2] 6.0 6.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
3. YELLOW WIRE
2. BLACK WIRE
1. RED WIRE
4. WHITE WIRE
Ø 405 mm
Ø 16”

15. 13
12V
VA97-ABL322P/N-103A


0
2
4
6
8
10
12

14
16

18
20

22
24
26
28

30
32

34
36
38
40

0
25
50

75

100
125
150
175
200
225
250
275

300
325
350
375
400

1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400
— — —  Current [A]  — ∙ —  Eficiency [%]  
Pressure [Pa] 
Airfow [m³/h] 
Axial fan performance curve
Features
Max fan speed rpm 2350
Min fan speed rpm 600
Sound pressure level dBA 71.2 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.7
Operating supply voltage range V 9.0 .. 16.0 at the Drive Connector
Supply voltage to reach max speed V 13.0 .. 16.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +115
Speed derating threshold °C +105 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 10
Load dump protection (Pulse 5b) V 35 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm
Ø 405 mm
Ø 16”

16. 14
399
= =
399
= =
80.7±1
414
220.8
= =
358.5
= =
207
= =
382.4
= =
(*)429
10
N°4 HOLES 8.5
N°4 HOLES 6.5
FAN ROTATION
OPIT ATTEHCITE
EPYT LEBAL
Motor designed for IP6K9K and IP68 protection
Ø 385 mm
Ø 15.2”
VA91-ABL326P/N-65A
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm
12V
PRODUCTS
high
Performance
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n7157-3582-907157-3582-907158-3030-507158-3030-50
Pin p/n 7114-3251 7114-32517114-4102-027114-4102-02
Section [mm2] 4.0 4.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
4. WHITE WIRE
SECT. 0.5 mm
2
1. RED WIRE
SECT. 4.0 mm
2
-
2. BLACK WIRE SECT. 4.0 mm
2
3. YELLOW WIRE SECT. 0.5 mm
2
+

17. Laboratory R&D
SPAL Automotive srl
Via per Carpi 26/b - 42015 Correggio (R.E.) - Italy print date: 19/03/2015 - print time: 11:43
template: \Galileo\laborat\Portata\Portata assiali Rev.0.1.xlsx
file: O:\MEDIA&COMMUNICATION\ADOBE IN DESIGN\CATALOGO BRUSHLESS 2014\SPAL_Catalogo Brushless_2014\grafici 12V\Portata assiali Datasheet 30107125.x
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200
—
—
—

Current [A]
—
·
—

Efficiency [%]

Static Pressure [Pa]

Airflow [m³/h]
15
12V
VA91-ABL326P/N-65A
Ø 385 mm
Ø 15.2”
Axial fan performance curve
Features
Max fan speed rpm 2500
Min fan speed rpm 850
Sound pressure level dBA 77 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.4
Operating supply voltage range V 9.0 .. 16.0 at the Drive Connector
Supply voltage to reach max speed V 13.0 .. 16.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +115
Speed derating threshold °C +85 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 14.5
Load dump protection (Pulse 5b) V 35 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm

18. 16
12V
PRODUCTS
high
Performance
VA116-ABL505P-105A
Ø 355 mm
Ø 14”
15
78.7
275.8
= =
382
= =
382
= =
275.8
= =
R8
390
(*) 430
10
N°4 HOLES 8
FAN ROTATION
P
OPIT ATTEHCITE
EPYT LEBAL
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n7158-3036-707158-3036-707158-3030-507158-3030-50
Pin p/n 7114-3273-027114-3273-027114-4102-027114-4102-02
Section [mm2] 10.0 10.0 0.5 0.5
4. WHITE WIRE
SECT. 0.5 mm
2
1. RED WIRE
SECT. 10.0 mm
2
-
2. BLACK WIRE SECT. 4.0 mm
2
3. YELLOW WIRE SECT. 0.5 mm
2
+

19. 17
12V
Ø 355 mm
Ø 14”
VA116-ABL505P-105A
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
425
450
475
500
525
550
575
600
1230 1480 1730 1980 2230 2480 2730 2980 3230 3480 3730 3980 4230
———Current [A]  —∙ —Eficiency [%] 
Pressure [Pa]
Airfow [m³/h]
Axial fan performance curve
Features
Max fan speed rpm 3300
Min fan speed rpm 800
Sound pressure level dBA 77.2 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.80
Operating supply voltage range V 9.0 .. 16.0 at the Drive Connector
Supply voltage to reach max speed V 13.0 .. 16.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +120
Speed derating threshold °C +105 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 17
Load dump protection (Pulse 5b) V 35 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm

20. 18
12V
PRODUCTS
high
Performance
VA116-ABL324P-105A
Ø 355 mm
Ø 14”
(*) 430
10
275.8
= =
382
= =
382
= =
275.8
= =
390
R8
15
78.7
N°4 HOLES 8
FAN ROTATION
OPIT ATTEHCITE
EPYT LEBAL
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n 7158-3035 7158-30357158-3030-507158-3030-50
Pin p/n 7114-3250 7114-32507114-4102-027114-4102-02
Section [mm2] 6.0 6.0 0.5 0.5
2. BLACK WIRE
SECT. 6.0 mm
2
4. WHITE WIRE
SECT. 0.5 mm
2
-
3. YELLOW WIRE SECT. 0.5 mm
2
1. RED WIRE SECT. 6.0 mm
2
+

21. 19
12V
Ø 355 mm
Ø 14”
VA116-ABL324P-105A
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
1136 1336 1536 1736 1936 2136 2336 2536 2736 2936 3136 3336
———Current [A]  —∙ —Eficiency [%] 
Pressure [Pa]
Airfow [m³/h]

Axial fan performance curve
Features
Max fan speed rpm 2800
Min fan speed rpm 700
Sound pressure level dBA 73.7 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.40
Operating supply voltage range V 9.0 .. 16.0 at the Drive Connector
Supply voltage to reach max speed V 13.0 .. 16.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +120
Speed derating threshold °C +105 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 17
Load dump protection (Pulse 5b) V 35 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm

22. 20
VA89-ABL320P/N-94A
12V
PRODUCTS
high
Performance
Ø 305 mm
Ø 12”
316.7
15.5
53.5
238.3
= =
332
= =
R9
238.3
= =
332 = =
340
76.65±1
(*)430
10
N4 FORI 7.5
N4 HOLES 7.5
SENSO ROTAZIONE
FAN ROTATION
P
OPIT ATTEHCITE
EPYT LEBAL
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n 7158-3035 7158-30357158-3030-507158-3030-50
Pin p/n 7114-3250 7114-32507114-4102-027114-4102-02
Section [mm2] 6.0 6.0 0.5 0.5
3. YELLOW WIRE
2. BLACK WIRE
1. RED WIRE
4. WHITE WIRE
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

23. 21
12V
Ø 305 mm
Ø 12”
VA89-ABL320P/N-94A

0
2,5

5
7,5
10
12,5
15
17,5
20
22,5
25
27,5
30
32,5
35
37,5
40
42,5

0
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
1000

1200

1400

1600

1800

2000

2200

2400

2600

2800

3000

— — —
Curr ent [ A ]
— · · —
Efficiency [ % ]
—
Pressure [ Pa ]
Q [ m³/h ]
Axial fan performance curve
Features
Max fan speed rpm 3500
Min fan speed rpm 900
Sound pressure level dBA 77 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.25
Operating supply voltage range V 9.0 .. 16.0 at the Drive Connector
Supply voltage to reach max speed V 13.0 .. 16.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +115
Speed derating threshold °C +105 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 10
Load dump protection (Pulse 5b) V 35 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm

24. 22
12V
PRODUCTS
high
Performance
VA99-ABL315P/N-101A/SH
Ø 280 mm
Ø 11”
361.2
325.2
60°
10°
306
= =
8.4 N°4 ASOLE
8.4 N°4 SLOT
10
76.95
293
(*) 230
10
P
SENSO ROTAZIONE
FAN ROTATION
OPIT ATTEHCITE
EPYT LEBAL
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n 7158-3035 7158-30357158-3030-507158-3030-50
Pin p/n 7114-3250 7114-32507114-4102-027114-4102-02
Section [mm2] 6.0 6.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
2. BLACK WIRE
SECT. 6.0 mm
2
4. WHITE WIRE
SECT. 0.5 mm
2
-
3. YELLOW WIRE SECT. 0.5 mm
2
1. RED WIRE SECT. 6.0 mm
2
+
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

25. 23
12V
Ø 280 mm
Ø 11”
VA99-ABL315P/N-101A/SH
0
5
10
15
20
25
30
35
40
45
50
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
425
450
475
500
525
550
575
600
625
650
675
700
920 1170 1420 1670 1920 2170 2420
———Current [A]  —∙ —Eficien cy [%] 
Pressure [Pa]
Airfow [m³/h]
Axial fan performance curve
Features
Max fan speed rpm 3800
Min fan speed rpm 950
Sound pressure level dBA 73.8 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.20
Operating supply voltage range V 9.0 .. 16.0 at the Drive Connector
Supply voltage to reach max speed V 13.0 .. 16.0 at the Drive Connector
Operating ambient temperature range °C -40 .. + 120
Speed derating threshold °C +105 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 15.0
Load dump protection (Pulse 5b) V 35 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm

26. 24
12V
PRODUCTS
high
Performance
VA109-ABL321P/N-109A/SH
Ø 255 mm
Ø 10”
A
A
200
= =
240
= =
(*)429
10
71.5
84.51
278
+2
0
SENSO ROTAZIONE
FAN ROTATION
P
K
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n 7158-3035 7158-30357158-3030-507158-3030-50
Pin p/n 7114-3250 7114-32507114-4102-027114-4102-02
Section [mm2] 6.0 6.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
2. BLACK WIRE
SECT. 6.0 mm
2
4. WHITE WIRE
SECT. 0.5 mm
2
-
3. YELLOW WIRE SECT. 0.5 mm
2
1. RED WIRE SECT. 6.0 mm
2
+
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

27. 25
12V
Ø 255 mm
Ø 10”
VA109-ABL321P/N-109A/SH
-5
0
5
10
15
20
25
30
35
40
45
0
100
200
300
400
500
600
700
800
0 500 1000 1500 2000 2500
———Current [A]  —∙ —Eficiency [%] 
Pressure [Pa]
Airfow [m³/h]
Axial fan performance curve
Features
Max fan speed rpm 4000
Min fan speed rpm 1000
Sound pressure level dBA 75.6 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.0
Operating supply voltage range V 9.0 .. 16.0 at the Drive Connector
Supply voltage to reach max speed V 13.0 .. 16.0 at the Drive Connector
Operating ambient temperature range °C -40 .. + 115
Speed derating threshold °C +105 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 14
Load dump protection (Pulse 5b) V 35 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm

28. 26
12V
PRODUCTS
high
Performance
020-ABL313P/N-95020
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n7157-3582-907157-3582-907158-3030-507158-3030-50
Pin p/n 7114-3251 7114-32517114-4102-027114-4102-02
Section [mm2] 4.0 4.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
2. BLACK WIRE
SECT. 4.0 mm
2
4. WHITE WIRE
SECT. 0.5 mm
2
-
3. YELLOW WIRE SECT. 0.5 mm
2
1. RED WIRE SECT. 4.0 mm
2
+
351
= =
105
= =
75.5
= =
335
= =
100
= =
218
= =
136
18
44.7
64.5
90
101
10
11.2
58.3
= =
11
2.5
61
167
140
57.5
58.7
N°27 HOLES 4.5
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

29. 27
12V
020-ABL313P/N-95 020

0
5
10
15
20
25
30
35
40
45
50
0
200
400
600
800
1000
1200
320 420 520 620 720 820 920 1020 1120 1220
———Current [A] —· —Efficiency [%]
Pressure [Pa]
Airflow [m³/h]
Axial fan performance curve
Features
Max fan speed rpm 3680
Min fan speed rpm 1100
Sound pressure level dBA 73.1 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.7
Operating supply voltage range V 9.0 .. 16.0 at the Drive Connector
Supply voltage to reach max speed V 13.0 .. 16.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +95
Speed derating threshold °C +85 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 13
Load dump protection (Pulse 5b) V 35 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm

31. 24V 24V HIGH-PERFORMANCE
SEALED BRUSHLESS MOTOR FANS & BLOWERS

32. PRODUCTS high Performance 30
24V
Ø 405 mm
Ø 16”
VA97-BBL339P/N-103A
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n7157-3582-907157-3582-907158-3030-507158-3030-50
Pin p/n 7114-3251 7114-32517114-4102-027114-4102-02
Section [mm2] 4.0 4.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
4. WHITE WIRE
SECT. 0.5 mm
2
1. RED WIRE
SECT. 4.0 mm
2
-
2. BLACK WIRE SECT. 4.0 mm
2
3. YELLOW WIRE SECT. 0.5 mm
2
+
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

33. 31
24V
VA97-BBL339P/N-103A
Ø 405 mm
Ø 16”
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
1100 1300 1500 1700 1900 2100 2300 2500 2700 2900 3100 3300 3500 3700
———Current [A]  —∙ —Eficiency [%] 
Pressure [Pa]
Airfow [m³/h]

Axial fan performance curve
Features
Max fan speed rpm 2450
Min fan speed rpm 600
Sound pressure level dBA 72.8 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.80
Operating supply voltage range V 16.0 .. 32.0 at the Drive Connector
Supply voltage to reach max speed V 26.0 .. 32.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +95
Speed derating threshold °C +85 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 17
Load dump protection (Pulse 5b) V 65 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm

34. PRODUCTS high Performance 32
24V
VA113-BBL504P/N-94A
Ø 305 mm
Ø 12”
238.3
= =
332
= =
R9
238.3
= =
332 = =
15
55
78.2±1
(*) 430
10
340
315
N°4 FORI 7.5
N°4 HOLES 7.5
SENSO ROTAZIONE
FAN ROTATION
P
OPIT ATTEHCITE
EPYT LEBAL
NOTE: YAZAKI connector counterpart available upon request (see page 57)
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n 7158-3035 7158-30357158-3030-507158-3030-50
Pin p/n 7114-3250 7114-32507114-4102-027114-4102-02
Section [mm2] 6.0 6.0 0.5 0.5
AIR FLOW
3. YELLOW WIRE
2. BLACK WIRE
1. RED WIRE
4. WHITE WIRE
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

35. 33
24V
Ø 305 mm
Ø 12”
VA113-BBL504P/N-94A
0
5
10
15
20
25
30
35
40
45
50
-200
0
200
400
600
800
1000
0 500 1000 1500 2000 2500 3000 3500 4000 4500
—
—
—
Current [A]
—
·
—
Efficiency [%]
Pressure [Pa]
Airflow [m³/h]
Axial fan performance curve
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm
Features
Max fan speed rpm 4750
Min fan speed rpm 1200
Sound pressure level dBA 85.6 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.6
Operating supply voltage range V 16.0 .. 32.0 at the Drive Connector
Supply voltage to reach max speed V 26.0 .. 32.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +110
Speed derating threshold °C +65 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 10
Load dump protection (Pulse 5b) V 65 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.

36. PRODUCTS high Performance 34
24V
VA89-BBL338P/N-94A
Ø 305 mm
Ø 12”
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n7157-3582-907157-3582-907158-3030-507158-3030-50
Pin p/n 7114-3251 7114-32517114-4102-027114-4102-02
Section [mm2] 4.0 4.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
4. WHITE WIRE
SECT. 0.5 mm
2
1. RED WIRE
SECT. 4.0 mm
2
-
2. BLACK WIRE SECT. 4.0 mm
2
3. YELLOW WIRE SECT. 0.5 mm
2
+
316.7
15.5
53.5
238.3
= =
332
= =
R9
238.3
= =
332 = =
340
76.65±1
(*)429
10
N4 FORI 7.5
N4 HOLES 7.5
SENSO ROTAZIONE
FAN ROTATION
P
OPIT ATTEHCITE
EPYT LEBAL
AIR FLOW
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

37. 35
24V
Ø 305 mm
Ø 12”
VA89-BBL338P/N-94A
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
425
450
475
500
525
550
575
600
1000 1500 2000 2500 3000 3500
———Current [A]  —∙ —Eficiency [%] 
Pressure [Pa]
Airfow [m³/h]

Axial fan performance curve
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm
Features
Max fan speed rpm 3650
Min fan speed rpm 900
Sound pressure level dBA 78 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.20
Operating supply voltage range V 16.0 .. 32.0 at the Drive Connector
Supply voltage to reach max speed V 26.0 .. 32.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +95
Speed derating threshold °C +85 (*)
Storage temperature range °C -40 .. +120
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 15
Load dump protection (Pulse 5b) V 65 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.

38. PRODUCTS high Performance 36
24V
VA89-BBL328P/N-94A
Ø 305 mm
Ø 12”
316.7
15.5
53.5
238.3
= =
332
= =
R9
238.3
= =
332 = =
340
76.65±1
(*)429
10
N4 FORI 7.5
N4 HOLES 7.5
SENSO ROTAZIONE
FAN ROTATION
P
OPIT ATTEHCITE
EPYT LEBAL
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n7157-3582-907157-3582-907158-3030-507158-3030-50
Pin p/n 7114-3251 7114-32517114-4102-027114-4102-02
Section [mm2] 4.0 4.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
4. WHITE WIRE
SECT. 0.5 mm
2
1. RED WIRE
SECT. 4.0 mm
2
-
2. BLACK WIRE SECT. 4.0 mm
2
3. YELLOW WIRE SECT. 0.5 mm
2
+
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

39. 37
24V
Ø 305 mm
Ø 12”
VA89-BBL328P/N-94A
0
5
10
15
20
25
30
35
40
45
50
0
50
100
150
200
250
300
350
400
450
500
1025 1225 1425 1625 1825 2025 2225 2425 2625 2825
———Current [A]  —∙ —Eficiency [%] 
Pressure [Pa]
Airfow [m³/h]

Axial fan performance curve
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm
Features
Max fan speed rpm 3400
Min fan speed rpm 850
Sound pressure level dBA 75.7 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.30
Operating supply voltage range V 16.0 .. 32.0 at the Drive Connector
Supply voltage to reach max speed V 26.0 .. 32.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +110
Speed derating threshold °C +95 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 11
Load dump protection (Pulse 5b) V 65 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.

40. PRODUCTS high Performance 38
24V
VA99-BBL324P/N-101A/SH
Ø 280 mm
Ø 11”
361.2
325.2
60°
10°
306
= =
8.4 N°4 ASOLE
8.4 N°4 SLOT
10
76.95
293
(*)230±10
P
SENSO ROTAZIONE
FAN ROTATION
OPIT ATTEHCITE
EPYT LEBAL
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n7157-3582-907157-3582-907158-3030-507158-3030-50
Pin p/n 7114-3251 7114-32517114-4102-027114-4102-02
Section [mm2] 4.0 4.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
2. BLACK WIRE
SECT. 4.0 mm
2
4. WHITE WIRE
SECT. 0.5 mm
2
-
3. YELLOW WIRE SECT. 0.5 mm
2
1. RED WIRE SECT. 4.0 mm
2
+
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

41. 39
24V
Ø 280 mm
Ø 11”
VA99-BBL324P/N-101A/SH

0
5
10
15
20
25
30
35
40
45
50
0
100
200
300
400
500
600
900 1100 1300 1500 1700 1900 2100 2300 2500
———Current [A] —· —Efficiency [%]
Pressure [Pa]
Airflow [m³/h]
Axial fan performance curve
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm
Features
Max fan speed rpm 4000
Min fan speed rpm 1000
Sound pressure level dBA 74.8 at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.0
Operating supply voltage range V 16.0 .. 32.0 at the Drive Connector
Supply voltage to reach max speed V 26.0 .. 32.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +95
Speed derating threshold °C +85 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 14
Load dump protection (Pulse 5b) V 65 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.

42. PRODUCTS high Performance 40
24V
VA109-BBL330P/N-109A/SH
Ø 255 mm
Ø 10”
A
A
200
= =
240
= =
(*)429
10
71.5
84.51
278
+2
0
SENSO ROTAZIONE
FAN ROTATION
P
K
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n7157-3582-907157-3582-907158-3030-507158-3030-50
Pin p/n 7114-3251 7114-32517114-4102-027114-4102-02
Section [mm2] 4.0 4.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
AIR FLOW
4. WHITE WIRE
SECT. 0.5 mm
2
1. RED WIRE
SECT. 4.0 mm
2
-
2. BLACK WIRE SECT. 4.0 mm
2
3. YELLOW WIRE SECT. 0.5 mm
2
+
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

43. 41
24V
Ø 255 mm
Ø 10”
VA109-BBL330P/N-109A/SH
0
5
10
15
20
25
30
35
40
45
50
0
100
200
300
400
500
600
700
800
900
1000
1000 1250 1500 1750 2000 2250
———Curr ent [A]  —∙ —Eficiency [%] 
Pressure [Pa]
Airfow [m³/h]

Axial fan performance curve
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm
Features
Max fan speed rpm 4300
Min fan speed rpm 1100
Sound pressure level dBA 78 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.0
Operating supply voltage range V 16.0 .. 32.0 at the Drive Connector
Supply voltage to reach max speed V 26.0 .. 32.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +95
Speed derating threshold °C +85 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 14
Load dump protection (Pulse 5b) V 65 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.

44. PRODUCTS high Performance 42
24V
020-BBL331P/N-95
NOTE: YAZAKI connector counterpart available upon request (see page 57)
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM* / E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n7157-3582-907157-3582-907158-3030-507158-3030-50
Pin p/n 7114-3251 7114-32517114-4102-027114-4102-02
Section [mm2] 4.0 4.0 0.5 0.5
2. BLACK WIRE
SECT. 4.0 mm
2
4. WHITE WIRE
SECT. 0.5 mm
2
-
3. YELLOW WIRE SECT. 0.5 mm
2
1. RED WIRE SECT. 4.0 mm
2
+
020
351
= =
105
= =
75.5
= =
335
= =
100
= =
218
= =
136
18
44.7
64.5
90
101
10
11.2
58.3
= =
11
2.5
61
167
140
57.5
58.7
N°27 HOLES 4.5
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm

45. 43
24V
020-BBL331P/N-95 020
Blower performance curve
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm
Features
Max fan speed rpm 3574
Min fan speed rpm 887
Sound pressure level dBA 72.8 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.3
Operating supply voltage range V 16.0 .. 32.0 at the Drive Connector
Supply voltage to reach max speed V 26.0 .. 32.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +95
Speed derating threshold °C +85 (*)
Storage temperature range °C -40 .. +125
Lifetime h up to 40000 hours depending on mission profile
Load dump protection (Pulse 5b) V 65 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
0
5
10
15
20
25
30
35
40
45
0
200
400
600
800
1000
1200
0 200 400 600 800 1000 1200 1400
—
—
—
Current [A]
—
·
—
Efficiency [%]
Pressure [Pa]
Airflow [m³/h]

46. PRODUCTS high Performance 44
24V
BBL354P-120S
Connector:YAZAKI HYBRID (USCAR-2 compliant) - Part number: 7282-8497-90
Identification +D -D A PWM*/E*
Pin number 1 2 3 4
Wire Color red black yellow white
Sealing p/n7158-3036-707158-3036-707158-3030-507158-3030-50
Pin p/n 7114-3273-027114-3273-027114-4102-027114-4102-02
Section [mm2] 10.0 10.0 0.5 0.5
NOTE: YAZAKI connector counterpart available upon request (see page 57)
A
A
211.7
0.5
30°
90°
123.4±1.5
32±0.5
188
0.5
7.5
0.2 N°4 HOLES
2.5±0.1
430±10
226.9±1.5
SEZIONE A-A
SCALA 2:1
EPYT LEBAL
Motor designed for IP6K9K and IP68 protection
Drawing
All dimensions are expressed in mm. Use M6 screws for fixing – nominal tightening torque 4 Nm
4. WHITE WIRE
SECT. 0.5 mm
2
1. RED WIRE
SECT. 4.0 mm
2
-
2. BLACK WIRE SECT. 4.0 mm
2
3. YELLOW WIRE SECT. 0.5 mm
2
+

47. 45
24V
BBL354P-120S
Axial fan performance curve
Features
Max fan speed rpm 1850
Min fan speed rpm 800
Sound pressure level dBA 73 - at 1 m ± 0.005 m from the fan module- lateral side
Weight Kg 2.6
Operating supply voltage range V 16.0 .. 32.0 at the Drive Connector
Supply voltage to reach max speed V 26.0 .. 32.0 at the Drive Connector
Operating ambient temperature range °C -40 .. +95
Speed derating threshold °C +85 (*)
Storage temperature range °C -40 .. +120
Lifetime h up to 40000 hours depending on mission profile
Time from 0 rpm to max speed s 5
Load dump protection (Pulse 5b) V 65 - Pulse peak voltage (Us *) - ISO16750-2:2010
Reverse polarity protection
ISO 16750-1 functional status class C - device fully functional after
correcting the polarity
Notes (*): Few minutes ambient temperature transients do not engage the derating owing to the thermal inertia of the system. Overloads may
anticipate derating.
Pressure: 1Pa=0.04 inH20 Airflow: 1m
3
/h=0.59 cfm
0
5
10
15
20
25
30
35
40
45
0
100
200
300
400
500
600
700
800
900
0 100 200 300 400 500 600 700 800
—
—
—
Current [A]
—
·
—
Efficiency [%]
Pressure [Pa]
Airflow [m³/h]

49. DRIVE CONTROL MODES

50. 48
PROTECTIONS
Built-in drive protections:
1. Drive blocked
2. Drive overheated
3. Drive overloaded
4. Under voltage
5. Over voltage
6. Over current
7. Internal Drive failure
MOTOR CONTROL INTERFACE
8 different interface control strategies for flexible and smart motor control
Mode description Mode +D -D PWM* / E* A Pins
On / off to minus 1 + - + 4
On / off to plus 2 - - + 4
On / off with enable low 3 + - + 4
Analog control 1 4 + - analog 4
Analog control 2 5 - - analog 4
Analog control with enable low 6 + - analog 4
Digital control 7 + - PWM n.c. 3
Mixed analog / digital control 8 + - PWM analog 4

+D+

+D+

E*

E*

-D

-D
+D : Drive positive supply
-D : Drive negative supply
PWM* / E* : PWM input / low active enable input
A : analog input
+ : connected to plus
- : connected to minus
analog : analog voltage signal
PWM : PWM signal
n. c. : not connected
: switch of the Drive positive supply to plus
: switch of the Drive negative supply to minus / GND
: switch active low enable input to minus / GND

+D+

E*

-D

51. 49
INTERFACE MODE 1: ON / OFF TO MINUS
To realize the mode On / off to minus with the Drive Interface
for Catalog Product 12 V it is necessary to put
- A to +D and
- PWM* / E* to -D.
When the switch S1 is switched on the Drive goes after the
initialization of the electronics to full speed.
This mode can be used if the CCU which controls the Drive
has limited capabilities or does not even exist. The Drive is
just switched on and off via any power switch like a relay,
MOS FET, or even just a switch.
The appropriate current rating for this “switch” has to be
dimensioned according to the current consumption of the
Drive.
26.03.2013
OnOfftominus wo F 00.vsd
M
-D
Drive
+D
PWM* / E*
A
S1
E
+

26.03.2013
OnOfftoplus wo F 00.vsd
M
-D
Drive
+D
PWM* / E*
A
E
+
S1
INTERFACE MODE 2: ON / OFF TO PLUS
To realize the mode On / off to plus with the Drive Interface for Catalog Product 12 V it is necessary to put
- A to +D and
- PWM* / E* to -D.
When the switch S1 is switched on the Drive goes after the
initialization of the electronics to full speed.
This mode can be used if the CCU which controls the Drive
has limited capabilities or does not even exist. The Drive is
just switched on and off via any power switch like a relay,
MOS FET, or even just a switch.
The appropriate current rating for this “switch” has to be
dimensioned according to the current consumption of the
Drive.

52. 50
INTERFACE MODE 3: ON / OFF WITH ENABLE LOW
To realize the mode On / off with enable low with the Drive Interface for Catalog Product 12 V it is
necessary
- A to +D and
- to use PWM* / E* as an low active enable.
In mode 3 the Drive can stay always on supply voltage and is controlled by a low current enable in-
put which can be driven by simple low cost low side signal driver in the CCU. When the enable input
PWM* / E* goes to high, the Drive goes after a short time into the quiescent current mode. When
the enable pin PWM* / E* is driven low, the Drive goes to full speed after the initialization of the
electronics. This mode can be used if the CCU which controls the Drive has limited capabilities or does
not even exist. The appropriate sink current rating of the driver for the enable pin PWM* / E* has to
be dimensioned according to the current consumption of the pin PWM* / E*. The circuit structure to
drive the pin PWM* / E* can be any active low “open collector” Typical circuitry.
INTERFACE MODE 4: ANALOG CONTROL 1
To realize the mode Analog control 1 with the Drive
Interface for Catalog Product 12 V it is necessary
- to use A as an analog input and
- to put PWM* / E* to -D.
When the switch S1 is switched on the Drive goes
after the initialization of the electronics to the
speed requested by the analog input A. The ap-
propriate current rating for this “switch” has to be
dimensioned according to the current consumption
of the Drive.
21.08.2013
OnOffwithE wo F 00.vsd
M
-D
Drive
+D
PWM* / E*
A
E
+

26.03.2013
Analogtominus wo F 00.vsd
M
-D
Drive
+D
PWM* / E*
A
S1
E
+
analog input
Ua

53. 51
INTERFACE MODE 5: ANALOG CONTROL 2
To realize the mode Analog control 2 with the Drive
Interface for Catalog Product 12 V it is necessary
- to use A as an analog input and
- to put PWM* / E* to -D.
When the switch S1 is switched on the Drive goes
after the initialization of the electronics to the
speed requested by the analog input A.
The appropriate current rating for this “switch”
has to be dimensioned according to the current
consumption of the Drive.
26.03.2013
Analogtoplus wo F 00.vsd
Drive
analog input
Ua
M
-D
+D
PWM* / E*
A
E
+
S1

INTERFACE MODE 6: ANALOG CONTROL WITH ENABLE LOW
To realize the mode Analog control with enable low with the Drive Interface for Catalog Product 12 V it is necessary - to use A as an analog input and - to use PWM* / E* as a low active enable.
In mode 6 the Drive can stay always on supply voltage and is controlled by a low current enable input
which can be driven by simple low cost low side signal driver in the CCU. When the enable input PWM* /
E* goes to high, the Drive goes after a short time into the quiescent current mode.
When the enable pin PWM* / E* is driven low, the Drive goes to the speed requested by the analog
input A after the initialization of the electronics. The appropriate sink current rating of the driver for the
enable pin PWM* / E* has to be dimensioned according to the current consumption of the pin PWM* /
E*.
The circuit structure to drive the pin PWM* / E* can be any active low “open collector” Typical circuitry
In this operating mode the supply voltage plus is usually connected permanently. To run the Drive first
the pin PWM* / E* has to be connected to supply voltage minus and afterwards the Drive speed can be
then controlled with an analog voltage on the pin A.
21.08.2013
AnalogwithE wo F 00.vsd
M
-D
Drive
+D
PWM* / E*
A
E
+
analog input
Ua

54. 52
INTERFACE MODE 7: DIGITAL CONTROL
To realize the mode Digital control with the Drive Interface for Catalog Product 12 V it is necessary
- to apply a PWM signal on the pin PWM* / E*.
In mode 7 the Drive can stay always on supply voltage and is controlled by a low current PWM and
enable PWM* / E* input which can be driven by simple low cost low side signal driver in the CCU.
When the enable input PWM* / E* goes to high, the Drive goes after a short time into the quiescent
current mode. When the enable pin PWM* / E* is driven with PWM, the Drive goes to the speed
requested by the duty cycle after the initialization of the electronics. The appropriate sink current
rating of the driver for the enable pin PWM* / E* has to be dimensioned according to the current
consumption of the pin PWM* / E*.
The circuit structure to drive the pin PWM* / E* can be any active low “open collector” Typical circuitry
In this operating mode the supply voltage plus is usually connected permanently. To run the Drive on
the pin PWM* / E* a PWM signal has to be applied and with the duty cycle of the PWM signal the
Drive speed can be then controlled.
INTERFACE MODE 8: MIXED ANALOG / DIGITAL CONTROL
To realize the mode Mixed analog / digital control with the Drive Interface for Catalog Product 12 V
it is necessary
- to use A as an analog input and
- to apply a PWM signal on the pin PWM* / E*.
In mode 8 the Drive can stay always on supply voltage and is controlled by a low current PWM and
enable PWM* / E* input which can be driven by simple low cost low side signal driver in the CCU.
When the enable input PWM* / E* goes to high, the Drive goes after a short time into the quiescent
current mode. When the enable pin PWM* / E* is driven low (switched to supply voltage minus), the
Drive goes to the speed requested by the analog input A after the initialization of the electronics (if
the electronics is not already activated). When the enable pin PWM* / E* is driven with PWM, the
Drive goes to the speed requested by the duty cycle after the initialization of the electronics (if the
electronics is not already activated). The appropriate sink current rating of the driver for the enable
pin PWM* / E* has to be dimensioned according to the current consumption of the pin PWM* /
E*. The circuit structure to drive the pin PWM* / E* can be any active low “open collector” Typical
circuitry.
21.08.2013
Digital wo F 00.vsd
M
-D
Drive
+D
PWM* / E*
A
E
+
PWM input
n. c.

55. 53
21.08.2013
AnalogDigital wo F 00.vsd
M
-D
Drive
+D
PWM* / E*
A
E
+
PWM input
analog input
Ua
In this operating mode the supply voltage plus is usually connected permanently. To run the Drive on
the pin PWM* / E* a PWM signal has to be applied and with the duty cycle of the PWM signal the Drive
speed can be then controlled. If the pin PWM* / E* is switched to supply voltage minus the Drive speed
can be then controlled with an analog voltage on the pin A.
So a mixed control with either digital or analog input is possible. The priority has the digital PWM signal.

56. 54
FUSE PROTECTION
An automotive fuse according ISO8820 part 3 must be applied in the vehicle/system wire harness.
Depending on the application of the fan, it is customer responsability to define and verify the correct
fuse value (due to the length of the vehicle cable harness, cross section of the power wires, fuse type).
POWER SUPPLY RESIDUAL RIPPLE
The maximum acceptable value of power supply rms ripple for the Drive is 1 %. In case of application
with high residual ripple values, please contact SPAL in order to find the suitable solution for your
specific requirements.
STANDARDS AND DIRECTIVES
The product complies with the following standard / directives
SEALING
Motor designed for IP6K9K and IP68 protection
Standard Code Description
72/245/EC and updates Automotive EMC directive
ECE Reg. 10-03 and updates Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
2002/95/EC RoHS Restriction of Hazardous Substances Directive
2000/53/EC and updates End-of Life Vehicle 2000/53/EC

57. ACCESSORIES

58. 56
30130709 Fitting
SOLUTIONS FOR EVER GROWING
COOLING NEEDS
ACCESSORIES ON REQUEST
SPAL p/n 30130709 – Additional protection guard for VA89A and VA113 shroud
SOLUTIONS FOR EVER GROWING
COOLING NEEDS

59. 57BRUSHLESS MOTOR
FANS AND BLOWERS OUR CLIENTS ARE OUR BEST REFERENCE
WE WORK WITH THE BEST OEM MANUFACTURES
YAZAKI CONNECTOR COUNTERPART
SPAL p/n 30130628 Complet Connector Counterpart. Kit available upon request.
The Kit includes:
Corresponding Yazaki
component PN
Notes Qty
7283-8497-90
Male Connector 1
7158-3032-60
Seal gasket 1,5 [mm] 1
7116-3251
Female Fast-on terminal 2
7157-3582-90 Seal gasket Ø 2,5-3,5 [mm] for cables 2
7116-3250 Female Fast-on terminal 2
7158-3035 Seal gasket Ø 4-5 [mm] for cables 2
7157-3581-80 Seal gasket Ø 4,75-5,65 [mm] for cables 2
7116-3285-02 Female Fast-on terminal 2
7158-3036-70 Seal gasket Ø 5,5-6,5 [mm] for cables 2
7116-4103-02 Female Fast-on terminal 2
7158-3031-90 Seal gasket Ø 1,6-2,2 [mm] for cables 2
7116-4102-02 Female Fast-on terminal 2
7158-3030-50 Seal gasket Ø 1,2-1,7 [mm] for cables 2
7147-8925-30 Connector fixing hook 1

60. 58
Accreditation
• SPAL has TS16949 and ISO 9001 certification for quality system requirements for design,
development, production, installation and servicing.
• SPAL’s Environmental Management System is certified to UNI EN ISO14001:2004, and also meets
the European Directive 2000/53/EC on end-of-life vehicles (ELV).
Global Footprint
• The SPAL team has an international presence with subsidiaries in 6 countries around the world.
• The location of subsidiaries has been carefully co-ordinated to optimise the distribution and
marketing of SPAL products with customer service and distribution centres based close to key
customers.
• As manufacturers and the market are demanding products to perform increasingly complex tasks
and requesting highly integrated systems, SPAL is prepared to invest in the future and rise to the
challenge.
• SPAL is open to accessing new markets such as exhaust technology and vehicle-heating systems
with plans to pursue these opportunities energetically in mature markets such as Europe and United
States as well as in emerging regions such as China, India and Russia.

61. SPAL ITALY (Correggio - Italy) Headquarter: Design, R&D and Production
SPAL USA (Des Moines - Iowa - USA) US Subsiadiary
SPAL CHINA (Shanghai -China) Chinese Subsidiary
SPAL Automotive UK (Worcester- UK) UK Subsidiary
SPAL do Brazil (Sao Paulo - Brazil) Brazilian Subsidiary
SPAL RUS (Saint-Petersburg - Russia) Russian Subsidiary
SPAL Japan K.K (Tokyo - Japan) Japanese Subsidiary
PEE AAR Automotive Technologies (Delhi - India) Indian Distribution Facility
Dedicated Area Managers covering Germany, Eastern Europe and Asian markets.

62. Air Since 1959
Shaping

63. The reproduction, even partial, of this catalogue is forbidden by
law.
This catalogue replaces all the previous one.
Our technical specification are purely indicative and might change without any
previous notice.

64. www.spalautomotive.com
HEADQUARTERS

SPAL AUTOMOTIVE
Via per Carpi, 26/B
42015 Correggio RE - ITALY
Ph. [phone]
fax [phone]
www.spalautomotive.it
[email protected]
SPAL USA
1731 SE Oralabor Road
Ankeny, IA 50021 - USA
www.spalusa.com
[email protected]
SPAL CHINA
No.343 Mei Gui North Road
Wai Gao Qiao Pilot Free Trade
Zone Shanghai - 200131
P.R.China
www.spal-china.com
[email protected]
SPAL DO BRASIL
R. Periperi, 158 - Socorro,
São Paulo, 04760-060 - BRASIL
www.spalbrasil.com
[email protected]
SPAL AUTOMOTIVE UK
Unit 201, Great Western
Business Park, Tolladine Road
WR4 9PT Worcester - UK
www.spalautomotive.co.uk
[email protected]
SPAL RUS LLC
Avenue Sofiyskaya 66, liter A.
192289 Sankt-Petersburg - RUSSIA
www.spalrus.com
[email protected]
SPAL JAPAN K.K.
SHIMA Akasaka Building
4-1-1 Akasaka, Minato-ku,
Tokyo 107-0052, JAPAN
www.spalautomotive.com
[email protected]
PEE AAR AUTOMOTIVE
TECHNOLOGIES LTD.
B-42, Sector 63
Noida, 201301 (U.P.) - INDIA
[email protected]
GERMANY
[email protected] - 04/2015