Stoping and methods of Stoping.

2,565 views 15 slides Jan 30, 2022
Slide 1
Slide 1 of 15
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15

About This Presentation

This is a presentation on Stoping and methods of stoping.
A helpful presentation for mining Engineering students.


Slide Content

/ Rajiv Gandhi college of Engineering Research And Technology, chandrapur Presentation on Topics:- Introduction to underground metalliferous stoping method. Brief Description of underhand and overhand stoping method. Date- 23/12/2021

Presented By:- Uddesh Kr. Bhagat & Reeshav Pathak Contents What is stoping ? Factors for the choice of method of Stoping Classification of method of Stoping Open stopes Overhand stoping Underhand stoping References

What is stoping ? Stoping is mainly used in metal mines, In which we extract an ore body that has already been developed.

Factors for the choice of method of Stoping :- Shape of the deposit. Size of the deposit. Strength of the ore deposit. Character of the walls. Geological structure of the deposit.

Classification of stoping methods. There are mainly four types of methods of stoping that are given below:- Naturally supported Stopes. Artificially supported Stopes. Caved Stopes. Combination of supported and Caved Stopes.

OPEN STOPES:- Part of naturally supported stopes No filling is used to support walls Both wall rocks and the ore should be strong If it will not be strong the roof will fall Strong ore and walls permits us to do drilling, loading and hauling. Open stopes is further divided into:- Overhand stoping Underhand stoping Breast stoping

Overhand stoping :- We proceeds from lower main level towards the upper main level ( i.e ; RAISE) The ore is extracted in steps like benches by the help of drilling and blasting Ore body should be strong Inclination > 40 degree to 90 degree Thickness is upto 4-5 m.

Underhand stoping :- We proceeds from upper main level to the lower main level ( i.e ; WINZE) Ore body should be strong Inclination > 45 degree to 85 degree. Thickness is not more than 1.5 m.

References:- D.J Deshmukh (Volume 2) Wikipedia https://youtu.be/jhFObbzpx2s https://youtu.be/yy6T4n2d8ac https://www.slideshare.net/tayyabanwar180/underground-mining-method Mining Mafia ( youtube Channel)

Thank you