Surfactant used in cosmetics.

Introduction of surfactant.
Types of surfactant
Application of surfactant

1. SURFACTANTS IN COSMATIC Presented By : Pawar Sanket Tulshidas Roll No . 510 1

2. Introduction To Surfactant . Classification . Selection Of Surfactant . How Do Cosmetic Surfactants Work ? Application Of Surfactant . Reference . 2 CONTENT :

3. 3 Introduction To Surfactant . Definition : Surfactants  are compounds that lower the surface tension  (or interfacial tension) between two liquids, between a gas and a liquid, or between a liquid and a solid.  Composition: Surfactants are usually organic compounds that are  amphiphilic , meaning they contain both  hydrophobic groups (their tails) and hydrophilic groups (their heads ). T ypically tail is long alkyl chain, and head is polar or hydrophilic groups . Therefore they are soluble in both organic solvents and water.

4. 4 Classification : Surfactants are categorized into four types :

5. 5 Type : Amphoteric Surfactant . Definition: Amphoteric surfactants are those which can have both a negative charge and a positive charge, depending on the pH . These materials are also referred to as zwitterionic materials . Example : cocamidopropyl betaine , cocoamphopropionate , and sodium lauraminopropionate . Amphoterics are used because they have good detergency and are less irritating than the anionics . They also can help thicken a formula and have a positive effect on foam, as they make the bubbles smaller and feel creamier . The main drawback to using them is that they are significantly more expensive

6. 6 Type : Anionic Surfactant . Definition: Anionic surfactant are negatively charged surfactant ions . Example : sodium lauryl sulfate , ammonium lauryl sulfate (ALS ), sulfosuccinates , alkyl benzene sulfanate , acyl methyl taurates , acyl sarcocinates , propyl peptide condensates, monoglyceride sulfates and fatty glycerol, ether sulfanates . Anionics are used primarily as the main detergent in cosmetics because they are good at removing dirt and oil. They produce pleasing amounts of foam. They are relatively inexpensive . Their primary drawback is that they can be irritating This is why they are often blended with amphoteric surfactants.

7. 7 Type : Cationic Surfactant . Definition: These are positively charged surfactant molecules . Example : Q uaternary ammonium salts,   cetrimonium bromide (CTAB),  cetylpyridinium chloride (CPC),  benzalkonium chloride (BAC),  benzethonium chloride (BZT ). They are not used for cleansing formulas because they don’t clean, rinse, or foam  . They are more irritating. cationics are great for conditioning . When a cation is put on hair or skin, the positive portion of the molecule is attracted to the negatively charged damaged site creating an electrostatic bond.  While water rinses most things away, the cationic surfactant remains

8. 8 Type : Nonionic Definition : Nonionic surfactants are molecules that do not have a charge . Example : Fatty alcohol – cetyl alcohol , steryl alcohol . Ethers – brij , octyl glucoside . Ester – glyceryl laurate , span . They are good foam enhancers (when used with anionics ) and can reduce irritation They also can thicken systems and provide a conditioning effect.  Additionally, they are very good for solubilizing fragrances and other natural oils in formulating. Gentle cleansers such as baby shampoos are based on nonionics . Nonionics do not work as well as anionics in shampoos.

9. 9 Different types of surfactant with there use :

10. 10 Types of surfactant for different action :

11. 11 Selection Of Surfactant

12. 12 How Do Cosmetic Surfactants Work ? When surfactants are put into solutions, the molecules have a tendency to line up in a certain way depending on the solution composition, the concentration of the surfactant, and the temperature . In a water solution with extremely low surfactant concentrations, the molecules tend to bounce around randomly without forming structures. But at the Critical Micelle Concentration (CMC) They arrange themselves in spherical structures called micelles. On the outer layer of the spheres are the hydrophilic parts of the surfactant molecule and on the inner layer are the lipophilic parts. It’s a bit like a cream filled donut.

13. 13 Application Of Surfactant . Cleansing Surfactants : The useful thing about micelles is that they can help suspend oil in water. When a small amount of oily materials is put into an aqueous solution of surfactants, it will migrate into the center portion of the micelle. So , when you put a surfactant solution on a surface like hair or skin, the oil that is there will be drawn away from the surface and into the micelles. When the surfactant solution is rinsed away, the surface is clean Foaming : Foam is another characteristic of surfactant solutions so you’ll need surfactants if you want your product to foam . Essentially, foam is the entrapment of air in liquids and the alignment of the surfactant molecules helps keep the foam stable. It should be noted that foam itself is not related to the ability of a product to clean. But consumers expect cleansing products to foam so as a cosmetic formulator, you’ll have to add foaming surfactants

14. 14 Application Of Surfactant . Emulsification : While cleansing cosmetics remove oils, many cosmetic products are design to add oily materials to the skin and hair . These ingredients usually can’t be applied directly because they have undesirable aesthetic characteristics in their concentrated form. For this reason, cosmetic chemists create emulsions using surfactants . Solubilization : The problem with most emulsions is that they usually create opaque products . However, there are times when a cosmetic chemist wants a clear formula but still wants to blend an oil in a mostly water formula . Fortunately, there are surfactants that have the ability to create particles so small that light passes through them and the solutions remain clear. Molecules that do this are solubilizing surfactants.

15. 15 Application Of Surfactant . Conditioning: Since surfactants often contain an “oily” part on their molecule, they have conditioning properties that can improve the feel and look of the surfaces of skin and hair. For them to work this way, the surfactants have to be left behind and also be non-irritating . This can be achieved through a leave-on cosmetic product or by using surfactants that can bond to surfaces through an electrostatic charge . Surfactants in mouth washes: Mainly for two purposes , mouthwashes may be employed such as cosmetic and therapeutic . Cosmetic mouthwashes can be synthesized to decrease lousy smell by the application of flavoring and / or antimicrobial agents. While therapeutic mouth rinses may be synthesized to decrease gingivitis, plaque, stomatitis, and dental caries. Surfactants are employed as they assist in the debris’ exclusion via delivering foaming action and in the flavors ’ solubilization .

16. 16 Application Of Surfactant . Surfactants in microbiology: Surface active agents such as quaternary ammonium compounds are those compounds which have antibacterial activity in themselves

17. 17 Reference : Suhail .m , kumar . A , khan a. , et.al Surfactants and their Role in Pharmaceutical Product Development: An overview (2019) , researchgate . https ://www.researchgate.net/publication/337756082_Surfactants_and_their_Role_in_Pharmaceutical_Product_Development_An_overview Romanowski . P . An introduction to cosmetic technology ( 2015) , AOCS https:// www.aocs.org/stay-informed/inform-magazine/featured-articles/an-introduction-to-cosmetic-technology-april-2015?SSO=True Nwokolo . G . Basics and Potential Applications of Surfactants – A Cosmetic Science Perspective (2018) Researchgate . https ://www.researchgate.net/publication/329246583_Basics_and_Potential_Applications_of_Surfactants_-_A_Cosmetic_Science_Perspective

18. 18 Thank you !