Unit 2 Standard costing.ppt finance and costing

Finance and costing

1. 1
STANDARD COSTING
AND
VARIANCE ANALYSIS

2. INDEX
Definition of standard
Steps in standard costing
Types of standards
Variance
Types of variance
Variance Analysis
Advantages & disadvantages of Std costing
2

3. 3
STANDARD
It’s a norm or bench mark
It is useful for comparison
it may indicate minimum quality 
Eg. Standard of passing

4. 4
STANDARD COST
An estimated or pre-determined
cost of performing an operation
or producing a good or service,
under normal conditions.  
It is used as a basis for cost
control through variance
analysis.

5. 5
It is chosen to serve as a
benchmark in the standard
costing/ budgetary control
system.
It is a budget for the production
of one unit of product or service.
Standard Cost

6. 6
STANDARD COST
 It is a pre-determined cost which is
calculated from management’s standards
of efficient operation and the relevant
necessary expenditure.
It is a
 cost accounting technique for
cost control where
 standard costs are
determined and compared with
actual
 costs, to initiate corrective action.

7. 7
STANDARD COSTING
It
 is a control method involving
the preparation of detailed cost
and sales budgets.
A management tool used to
facilitate management by
exception.

8. 8
STEPS IN STANDARD COSTING

9. STEPS IN STANDARD
COSTING
Set the standard cost

A standard quantity is predetermined
and standard price per unit is
estimated.

Budgeted cost is calculated by using
standard cost.
9

10. STEPS IN STANDARD COSTING
•Record the actual cost

Calculate actual quantity and
cost incurred giving full details.
10

11. STEPS IN STANDARD COSTING
Variance Analysis
Comparison of the actual cost with the
budgeted cost.
The cost variance is used in controlling cost.
Create effective control system.
Resetting the budget, if required.
11

12. TYPES OF STANDARDS
Ideal Standards:
These represents the level of performance attainable
when prices for material and labour are most
favorable, when the highest output is achieved with
the best equipment and layout and when maximum
efficiency in utilization of resources results in
maximum output with minimum cost.
12

13. Normal Standards:

These are the standards that may be achieved
under normal operating conditions. The normal
activity has been defined as number of standard
hours which will produce normal efficiency
sufficient goods to meet the average sales
demand over a term of years.
13

14. Basic or Bogey standards:
When basic standards are in use, variances are not
calculated as the difference between standard and
actual cost. Instead, the actual cost is expressed
as a percentage of basic cost.
Does not consider the variable costs
14

15. Current Standard:
These standards reflect the management’s anticipation of
what actual cost will be for the current period. These
are the costs which the business will incur if the
anticipated prices are paid for goods and services and
the usage corresponds to that believed to be necessary
to produce the planned output.
15

16. VARIANCE
The difference between standard cost and actual cost of the
actual output is defined as Variance. A variance may be
favorable or unfavorable.
If the actual cost is less than the standard cost, the
variance is favorable and if the actual cost is more than the
standard cost, the variance will be unfavorable.
It is not enough to know the figures of these variances in
fact it is required to trace their origin and causes of
occurrence for taking necessary remedial steps to reduce /
eliminate them.
16

17. 17
Variance - Types
The purpose of standard costing reports is
to investigate the reasons for significant
variances so as to identify the problems
and take corrective action. Variances are
broadly of two types, namely, controllable
and uncontrollable.

18. VARIANCE ANALYSIS
Variance analysis is the dividing
of the cost variance into its
components to know their
causes, so that one can approach
for corrective measures.
18

19. VARIANCE ANALYSIS
Variances of Efficiency:
Variance arising due to the effectiveness in
use of material quantities, labour hours.
Here actual quantities are compared with
predetermined standards.
19

20. Variances of Price Rates:
Variances arising due to change in unit material prices, standard
labour hour rates and standard allowances for indirect costs. Here
actual prices are compared with predetermined ones.
Variances of Due to Volume :
Variance due to effect of difference between actual activity and the
level of activity estimated when the standard was set.
20

21. 21

22. REASONS OF
MATERIAL VARIANCE
Change in Basic price
Fail to purchase anticipated standard
quantities at appropriate price
Use of sub-standard material
Ineffective use of materials
Pilferage
22

23. VARIANCE
COMPONENTS
Price
Variance
Mix
Variance
Yield
Variance
Quantity
Variance
Material Cost Variance

24. MATERIAL VARIANCE
Material Cost Variance
Material Price Variance
Material Usage Variance
Can we sub-divide Usage Variance ?
What are its causes, when we have more
than one Raw Material ?
24

25. MATERIAL VARIANCE
Material Cost Variance
Material Price Variance
Material Usage Variance
Material Yield Variance
Material Mix Variance
25

26. MATERIAL VARIANCE
Material Cost Variance= (Standard Quantity X
Standard Price) –(Actual Qty X Act Price)
Material Price Variance= Actual Quantity
(Standard Price - Actual Price)
Material Usage Variance or Quantity
Variance=Standard Price (Standard Quantity -
Actual Quantity)
26

27. REASONS OF LABOUR
VARIANCE
Time Related Issues
Change in design and quality standard
Low Motivation
Poor working conditions
Improper scheduling/placement of labour
Inadequate Training
27

28. REASONS OF LABOUR
VARIANCE
Rate Related Issues
Increments / high labour wages
Overtime
Labour shortage leading to higher rates
Union agreement
28

29. Labour
cost
variance
Labour total
efficiency
variance
Labour
efficiency
variance
Idle
time
varianc
e
Labour
rate
variance
Labour Mix
Variance
Labour
yield variance
Labour Variance

30. LABOUR VARINACE
When output is not given:
1.LabourCost Variance: Total Standard
Labour Cost-Total Actual Labour Cost
2.Labour Rate Variance: AH[SR-AR]
3.Labour Efficiency Variance: SR[SH-
AH]
where
AH---Actual Hours SR---Standard Rate
AR---Actual Rate
SH---Standard Hours

31. LABOUR VARINACE
When output is given
1.Labor cost
variance:Standard cost
Standard output
X Actual Output –Total actual
labour cost
2.Labour Rate Variance: AH[SR-AR]
3.Labour Efficiency Variance:
SR[Standard Hrs. of AX Actual Output –Actual
Hrs.A] Standard Output

32. LABOUR VARINACE
4.Labour Mix Variance:
SR[Standard Hrs. of AX Total Actual Hrs -Actual Hrs. of A]
Total Standard Hrs
5.Labour Yield Variance:
SR[Actual Yield-Standard output X Total Actual Hrs.
Total Standard Hrs.
Where SR=Standard Cost
Standard Output
6.Idle Time Variance:
Idle Time X Standard Rate
When Idle time=0,then LTEV=LEV

33. ADVANTAGES OF STANDARD
COSTING
Advantages
Basis for sensible cost comparisons
Employment of management by
exception
Means of performance evaluation for
employees
Result in more stable product cost
33

34. DISADVANTAGES OF STANDARD
COSTING
Disadvantages
Too comprehensive hence time-
consuming
Precise estimation of prices or
rates is difficult
34

35. PRACTICAL PROBLEMS
1.A furniture company uses sunmica tops for tables. It provides the
following data:
St. Quantity for sunmica per table4 sq. ft
St. price per sq. ft of sunmicaRs. 5
Actual prod. Of tables 1000
Sunmica actually used 4,300 sq.ft
Actual purchase price per sq. ftRs. 5.50.
Calculate Material variances.

36. St. pricexSt. Quantity 5x4000=20000
St. pricexActual Quanity 5x4300=21500
Actual PricexActual Quanity 5.5x4300=23650
Material Cost Variance -3650
Material Usage Variance -1500
Material Price Variance -2150

37. 2.From the following information calculate (i)
material cost variance (ii) material price
variance (iii) Material Usage variance
Standard output100 units
Standard Material per unit3 Ibs
Standard price per Ib.Rs. 2
Actual output80 units
Actual priceRs. 5.50
Actual materials used 250 Ibs
Material Cost Variance 65
Material Usage Variance -60
Material Price Variance 125

38. 3.From the following information calculate (i) material cost variance
(ii) material price variance (iii) Material Usage variance
Quantity of material purchased 3000 units
Value of material purchased Rs. 9000
St. quantity of raw material req. p.u. 25 units
Standard rate of material unit Rs. 2 per
Opening stock of material Nil
Closing stock of material 500 units
Finished production during the period 80 units
St. pricexSt. Quantity 2x2000=4000
St. pricexActual Quanity 2x2500=5000
Actual PricexActual Quanity 3x2500=7500
Material Cost Variance-3500
Material Usage Variance-1000
Material Price Variance-2500

39. 4.The standard output of the production house has been
set at 1000 pieces per month. However actually 1020
pieces were produced. Following is the data for actual
and standard production.
Standard Actual Results
Usage 1.5 sq. ft per pad 1.3 sq. ft per pad
Price Rs. 0.15 per sq. ft Rs. 0.18 per sq. ft
Calculate all material variances.
St. pricexSt. Quantity 0.15x1530=229.5
St. pricexActual Quanity 0.15x1326=198.9
Actual PricexActual Quanity 0.18x1326=238.68
Material Cost Variance -9.18
Material Usage Variance 30.6
Material Price Variance-39.8

40. St. pricexSt. Quantity 1x300000=300000
St. pricexActual Quanity 1x280000=280000
Actual PricexActual Quanity 0.9x280000=252000
Material Cost Variance48000
Material Usage Variance20000
Material Price Variance28000
5.A mfg. concern, which has adopted standard costing, furnishes
the following information:
Standard:
Material for 70 kg. Of finished products100 kgs.
Price of materialsRs. 1 per kg.
Actual:
Output210,000 kgs
Material used280,000 kgs.
Cost of materialsRs. 2,52,000
Calculate all material variances.

41. MATERIAL MIX VARIANCE
Material Mix Variance
= [Revised St. Qty – Actual Qty] x St. Price
Rev. St. Qty = St. Qty of 1 Mat. x Actual Total
Standard Total

42. From the following information regarding a standard product,
compute 1. Mix 2. Price 3. Usage Variance:
Raw Material Standard Actual
X 40 units @ Rs. 50 p.u.50 units @ Rs. 50 p.u.
Y 60 units @ Rs. 40 p.u.60 units @ Rs. 45 p.u.
Total 100 units 110 units
Rev.ST. QtySt. PriceSt. QtyAct.PriceAct. Qty
Revised St. Qty X40/100 x 110 = units 44 50 40 50 50
Revised St. Qty Y60/100 x 110 = units 66 40 60 45 60
Material Mix Variance
For X -300
For Y 240 -60MMV
Material Usage Variance
For X -500
For Y 0 -500MUV
Material Price Variance
For X 0
For Y -300 -300MPV

43. From the following information regarding a standard product,
compute 1. Mix 2. Price 3. Usage Variance:
Material
Standard Actual
Qty.Rs. p.u.Total Qty
Unit
Price Total
A 4 1.00 4.00 2 3.50 7.00
B 2 2.00 4.00 1 2.00 2.00
C 2 4.00 8.00 3 3.00 9.00
Total 8 7.00 16.00 6.00 8.50 18.00
St. PriceSt. QtyAct.PriceAct. Qty
Revised St. Qty A 4/8*6=units3.00 1.00 4 3.50 2
Revised St. Qty B 2/8*6=units1.50 2.00 2 2.00 1
Revised St. Qty C 2/8*6=units1.50 4.00 2 3.00 3
Material Mix Variance
For A 1
For B 1 -4MMV
For C -6
Material Usage Variance
For A 2
For B 2 0MUV
For C -4
Material Price Variance
For A -5
For B 0 -2MPV
For C 3

44. Material variances
•Labour Cost VarianceSH*SR – AH*AR
•Labour Usage/Efficie. Var (SH-AHactual)*SR
•Labour Rate Variance(SR-AR)* AH
•Idle time Variance SR*Idle time
LABOUR VARIANCES

45. PRACTICE PROBLEM
A firm gives you the following data:
Standard time per unit 2.5 hours
Actual hours worked 2,000 hours
Standard rate of pay Rs. 2 per hour
25 % of the actual hours has been lost as idle time.
Actual output 1,000 units
Actual wages Rs. 4,500
Calculate all labour variances.
St. Rate 2 LUV2000F
St. Hrs2500 LPV-500U
Actual Rate2.25ITV1000F
Actual Hrs2000 LCV500F
Idle time500

46. PRACTICE PROBLEMS
Compute the Labour variances from the
information given below:
Standard time 3 hours per unit
Standard rate of wagesRs. 6 per hour
Actual production 700 units
Actual time taken 2000 hours
Actual Wages Rs. 14000 
Idle time 50 hours
St. Rate 6 LUV900F
St. Hrs2100 LPV-2000U
Actual Rate7 LCV-1400U
Actual Hrs2000 IDV300
Idle time50