V3 astm-a1085 dimensions-section-properties

Catalogo tuberia estructural

1. HSS
Hollow
Structural
Sections
DIMENSIONS AND SECTION PROPERTIES
ASTM A1085
HSS:
TECHNICAL
BROCHURE
©2013 Steel Tube Institute
2516 Waukegan Road, Suite 172
Glenview, IL 60025
TEL: [phone]
FA X: 8 47.660.7981

2. Table of Contents
Dimensions and Sections Properties of Round HSS
Dimensions and Sections Properties of Square HSS
Dimensions and Sections Properties of Rectangular HSS2
10
6
Nominal width minus 3 times the design wall thickness, t (in.)
Torsional shear constant of cross-section (in.3)
Outside diameter of round HSS (in.)
Nominal depth minus 3 times the design wall thickness, t (in.)
Moment of inertia of cross-section (in.4)
Torsional stiffness constant of cross-section (in.4)
Governing radius of gyration (in.)
Elastic section modulus (in.3)
Design wall thickness (in.)... “units added”
Plastic section modulus (in.3)
Nomenclature
b
h
D
J
C
I
r
S
t
Z
22
10
Note: The information presented in this publication has been prepared in accordance with
recognized engineering principles and is for general information only. While it is believed to
be accurate, this information should not be used or relied upon for any specific application
without competent professional examination and verification of its accuracy, suitability,
and applicability by a licensed professional engineer, designer, or architect. The publication
of the material contained herein is not intended as a representation or warranty on the part
of The Steel Tube Institute of North America or of any other person named herein, that this
information is suitable for any general or particular use or of freedom from infringement of
any patent or patents. Anyone making use of this information assumes all liability arising
from such use.
Caution must be exercised when relying upon other specifications and codes developed by
other bodies and incorporated by reference herein since such material may be modified or
amended from time to time subsequent to the printing of this edition. The Institute bears no
responsibility for such material other than to refer to it and incorporate it by reference at the
time of the initial publication of this edition.
Foreword

3. DIMENSIONS
AND SECTION
PROPERTIES OF
ROUND HSS
Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A D/t
I S r Z
Torsion
J C
in. lb/ft in.
2
in.
4
in.
3
in. in.
3
in.
4
in.
3
HSS20X0.5000.500 104.2330.6 40.0 1460 146 6.90 190 2910 291
X0.3750.375 78.67 23.1 53.3
1110 111 6.94 144 2230 223
HSS18X0.500 0.500 93.54 27.5 36.0 1050 117 6.19 153 2110 234
X0.3750.375 70.66 20.8 48.0
807 89.6 6.23 117 1610 179
HSS16X0.625 0.625 102.7330.2 25.6 894 112 5.44 148 1790 223
X0.5000.500 82.85 24.3 32.0 732 91.5 5.48 120 1460 183
X0.4380.438 72.87 21.4 36.5 649 81.1 5.50 106 1300 162
X0.3750.375 62.64 18.4 42.7 562 70.3 5.53 91.6 1120 140
X0.3120.312 52.32 15.4 51.3 473 59.2 5.55 76.8 946 118
X0.2500.250 42.09 12.4 64.0 384 48.0 5.57 62.0 767 95.9
HSS14X0.625 0.625 89.36 26.3 22.4 589 84.1 4.73 112 1180 168
X0.5000.500 72.16 21.2 28.0 484 69.1 4.78 91.2 968 138
X0.3750.375 54.62 16.1 37.3 373 53.3 4.82 69.6 746 106
X0.3120.312 45.65 13.4 44.9 314 44.9 4.84 58.5 629 89.7
X0.2500.250 36.75 10.8 56.0 255 36.5 4.86 47.3 511 72.9
HSS12.75X0.500 0.500 65.48 19.2 25.5 362 56.7 4.33 75.1 723 113
X0.3750.375 49.61 14.6 34.0 279 43.8 4.38 57.4 559 87.5
X0.2500.250 33.41 9.82 51.0 192 30.1 4.42 39.1 384 60.1
HSS10.75X0.500 0.500 54.79 16.1 21.5 212 39.4 3.63 52.6 424 78.5
X0.3750.375 41.59 12.2 28.7 165 30.6 3.67 40.4 329 61.1
X0.2500.250 28.06 8.25 43.0 114 21.2 3.71 27.6 227 42.3
HSS10X0.625 0.625 62.64 18.4 16.0 203 40.6 3.32 55.0 406 80.6
X0.5000.500 50.78 14.9 20.0 169 33.8 3.36 45.2 338 67.2
X0.3750.375 38.58 11.3 26.7 132 26.3 3.41 34.8 263 52.5
X0.3120.312 32.31 9.50 32.1 112 22.3 3.43 29.3 223 44.5
X0.2500.250 26.06 7.66 40.0 91.1 18.2 3.45 23.8 182 36.4
X0.1880.188 19.72 5.80 53.2 69.8 14.0 3.47 18.1 140 27.9
2

4. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A D/t
I S r Z
Torsion
J C
in. lb/ft in.
2
in.
4
in.
3
in. in.
3
in.
4
in.
3
HSS9.625X0.500 0.500 48.77 14.3 19.2 150 31.1 3.23 41.7 299 61.9
X0.3750.375 37.08 10.9 25.7 117 24.3 3.27 32.1 233 48.4
X0.3120.312 31.06 9.13 30.8 99.1 20.6 3.29 27.1 198 41.1
X0.2500.250 25.06 7.36 38.5 81.0 16.8 3.32 22.0 162 33.6
X0.1880.188 18.97 5.57 51.2 62.1 12.9 3.34 16.7 124 25.8
HSS8.625X0.625 0.625 53.45 15.7 13.8 126 29.3 2.84 40.1 253 58.0
X0.5000.500 43.43 12.8 17.2 106 24.5 2.88 33.0 211 48.7
X0.3750.375 33.07 9.72 23.0 82.9 19.2 2.92 25.5 166 38.3
X0.3220.322 28.58 8.40 26.8 72.5 16.8 2.94 22.2 145 33.5
X0.2500.250 22.38 6.58 34.5 57.7 13.4 2.96 17.5 115 26.7
X0.1880.188 16.96 4.98 45.9 44.4 10.3 2.98 13.4 88.7 20.6
HSS7.625X0.375 0.375 29.06 8.54 20.3 56.3 14.8 2.57 19.7 113 29.4
0.3280.328 25.59 7.52 23.2 50.1 13.2 2.58 17.5 100 26.2
HSS7.5X0.500 0.500 37.42 11.0 15.0 67.7 18.1 2.48 24.5 135 35.8
X0.3750.375 28.56 8.39 20.0 53.4 14.2 2.52 19.1 107 28.4
X0.3120.312 23.97 7.05 24.0 45.6 12.2 2.54 16.1 91.2 24.2
X0.2500.250 19.38 5.69 30.0 37.5 9.99 2.56 13.1 74.9 19.9
X0.1880.188 14.70 4.32 39.9 28.9 7.70 2.59 10.1 57.8 15.4
HSS7X0.500 0.500 34.74 10.2 14.0 54.2 15.5 2.30 21.2 108 30.7
X0.3750.375 26.56 7.80 18.7 43.0 12.3 2.35 16.5 85.9 24.4
X0.3120.312 22.31 6.56 22.4 36.7 10.5 2.37 14.0 73.5 20.9
X0.2500.250 18.04 5.30 28.0 30.2 8.64 2.39 11.4 60.5 17.2
X0.1880.188 13.69 4.02 37.2 23.4 6.67 2.41 8.73 46.7 13.3
HSS6.875X0.500 0.500 34.07 10.0 13.8 51.2 14.9 2.26 20.4 102 29.5
X0.3750.375 26.06 7.66 18.3 40.6 11.8 2.30 15.9 81.2 23.5
X0.3120.312 21.89 6.43 22.0 34.7 10.1 2.32 13.4 69.4 20.1
X0.2500.250 17.71 5.20 27.5 28.6 8.32 2.34 11.0 57.2 16.6
X0.1880.188 13.44 3.95 36.6 22.1 6.43 2.37 8.41 44.2 12.8
DIMENSIONS
AND SECTION
PROPERTIES OF
ROUND HSS
3

5. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A D/t
I S r Z
Torsion
J C
in. lb/ft in.
2
in.
4
in.
3
in. in.
3
in.
4
in.
3
HSS6.625X0.500 0.500 32.74 9.62 13.2 45.4 13.7 2.17 18.8 90.8 27.1
X0.4320.432 28.60 8.40 15.3 40.5 12.2 2.19 16.6 81.0 24.2
X0.3750.375 25.06 7.36 17.7 36.1 10.9 2.21 14.7 72.2 21.6
X0.3120.312 21.06 6.19 21.2 30.9 9.33 2.23 12.4 61.8 18.6
X0.2800.280 18.99 5.58 23.7 28.1 8.50 2.25 11.3 56.3 16.9
X0.2500.250 17.04 5.01 26.5 25.5 7.69 2.26 10.2 50.9 15.3
X0.1880.188 12.94 3.80 35.2 19.7 5.95 2.28 7.79 39.4 11.9
HSS6X0.500 0.500 29.40 8.64 12.0 32.9 11.0 1.95 15.2 65.9 21.6
X0.3750.375 22.55 6.63 16.0 26.3 8.78 1.99 11.9 52.7 17.4
X0.3120.312 18.97 5.58 19.2 22.6 7.54 2.01 10.1 45.2 15.0
X0.2800.280 17.12 5.03 21.4 20.6 6.88 2.02 9.17 41.3 13.7
X0.2500.250 15.37 4.52 24.0 18.7 6.23 2.03 8.27 37.4 12.4
X0.1880.188 11.68 3.43 31.9 14.5 4.84 2.06 6.35 29.0 9.66
HSS5.563X0.500 0.500 27.06 7.95 11.1 25.7 9.25 1.80 12.9 51.5 18.2
X0.3750.375 20.80 6.11 14.8 20.7 7.43 1.84 10.1 41.3 14.7
X0.2580.258 14.63 4.30 21.6 15.2 5.45 1.88 7.27 30.3 10.9
X0.1880.188 10.80 3.17 29.6 11.5 4.13 1.90 5.43 23.0 8.24
HSS5.5X0.500 0.500 26.73 7.85 11.0 24.8 9.01 1.78 12.5 49.6 17.7
X0.3750.375 20.55 6.04 14.7 19.9 7.25 1.82 9.87 39.9 14.4
X0.2580.258 14.46 4.25 21.3 14.6 5.32 1.86 7.10 29.3 10.6
HSS5X0.500 0.500 24.05 7.07 10.0 18.1 7.25 1.60 10.2 36.2 14.2
X0.3750.375 18.54 5.45 13.3 14.7 5.87 1.64 8.04 29.3 11.6
X0.3120.312 15.64 4.6 16.0 12.7 5.07 1.66 6.87 25.4 10.1
X0.2580.258 13.08 3.84 19.4 10.8 4.33 1.68 5.81 21.7 8.62
X0.2500.250 12.69 3.73 20.0 10.6 4.22 1.68 5.65 21.1 8.40
X0.1880.188 9.67 2.84 26.6 8.24 3.30 1.70 4.36 16.5 6.57
DIMENSIONS
AND SECTION
PROPERTIES OF
ROUND HSS
4

6. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A D/t
I S r Z
Torsion
J C
in. lb/ft in.
2
in.
4
in.
3
in. in.
3
in.
4
in.
3
HSS4.5X0.375 0.375 16.54 4.86 12.0 10.4 4.63 1.46 6.40 20.8 9.13
X0.3370.337 15.00 4.41 13.4 9.61 4.27 1.48 5.85 19.2 8.45
X0.2370.237 10.80 3.17 19.0 7.23 3.21 1.51 4.31 14.5 6.39
X0.1880.188 8.67 2.55 23.9 5.93 2.64 1.53 3.50 11.9 5.25
HSS4X0.313 0.313 12.34 3.63 12.8 6.21 3.10 1.31 4.27 12.4 6.13
X0.2500.250 10.02 2.95 16.0 5.20 2.60 1.33 3.52 10.4 5.16
X0.2370.237 9.53 2.8 16.9 4.98 2.49 1.33 3.36 10.0 4.94
X0.2260.226 9.12 2.68 17.7 4.79 2.39 1.34 3.22 9.58 4.76
X0.2200.220 8.89 2.61 18.2 4.68 2.34 1.34 3.15 9.36 4.65
X0.1880.188 7.66 2.25 21.3 4.10 2.05 1.35 2.73 8.20 4.08
HSS3.5X0.313 0.313 10.66 3.13 11.2 4.02 2.30 1.13 3.19 8.03 4.52
X0.3000.300 10.26 3.02 11.7 3.89 2.23 1.14 3.08 7.79 4.38
X0.2500.250 8.69 2.55 14.0 3.39 1.94 1.15 2.65 6.78 3.83
X0.2160.216 7.58 2.23 16.2 3.02 1.72 1.16 2.33 6.03 3.42
X0.2030.203 7.15 2.10 17.2 2.87 1.64 1.17 2.21 5.74 3.26
X0.1880.188 6.66 1.96 18.6 2.69 1.54 1.17 2.06 5.38 3.06
HSS3X0.250 0.250 7.35 2.16 12.0 2.06 1.37 0.976 1.90 4.12 2.71
X0.2160.216 6.43 1.89 13.9 1.84 1.23 0.987 1.68 3.68 2.43
X0.2030.203 6.07 1.78 14.8 1.75 1.17 0.991 1.59 3.51 2.32
X0.1880.188 5.65 1.66 16.0 1.65 1.10 1.00 1.49 3.30 2.18
X0.1520.152 4.63 1.36 19.7 1.38 0.922 1.01 1.23 2.77 1.83
HSS2.875X0.250 0.250 7.02 2.06 11.5 1.79 1.25 0.932 1.73 3.58 2.45
X0.2030.203 5.80 1.70 14.2 1.53 1.06 0.947 1.45 3.06 2.11
X0.1880.188 5.40 1.59 15.3 1.44 1.00 0.952 1.36 2.88 1.99
HSS2.5X0.250 0.250 6.01 1.77 10.0 1.13 0.906 0.800 1.27 2.26 1.77
X0.1880.188 4.65 1.37 13.3 0.918 0.735 0.820 1.01 1.84 1.45
HSS2.375X0.250 0.250 5.68 1.67 9.50 0.955 0.804 0.756 1.13 1.91 1.57
X0.2180.218 5.03 1.48 10.9 0.868 0.731 0.766 1.02 1.74 1.44
X0.1880.188 4.40 1.29 12.6 0.778 0.655 0.7760.901 1.56 1.29
X0.1540.154 3.66 1.07 15.4 0.666 0.561 0.7870.761 1.33 1.11
HSS1.9X0.188 0.188 3.44 1.01 10.1 0.375 0.395 0.6090.5530.7500.773
DIMENSIONS
AND SECTION
PROPERTIES OF
ROUND HSS
5

7. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/t h/t
I S r Z
Torsion Surface
AreaJ C
in. lb/ft in.
2
in.
4
in.
3
in. in.
3
in.
4
in.
3
ft
2
/ft
HSS22X22X7/8 0.875 244.8872.0 21.5 21.5 5280 480 8.56 565 8420 778 7.08
X3/4 0.750 212.0062.3 25.7 25.7 4630 421 8.62 492 7330 676 7.12
HSS20X20X7/8 0.875 221.0665.0 19.3 19.3 3900 390 7.75 461 6260 638 6.42
X3/4 0.750 191.5856.3 23.1 23.1 3430 343 7.81 403 5460 554 6.45
X5/8 0.625 161.4047.4 28.4 28.4 2940 294 7.88 342 4620 468 6.49
X1/2 0.500 130.5238.4 36.4 36.4 2410 241 7.92 279 3760 380 6.52
HSS18X18X7/8 0.875 197.2458.0 17.0 17.0 2780 309 6.92 368 4500 511 5.75
X3/4 0.750 171.1650.3 20.4 20.4 2460 273 6.99 322 3930 445 5.79
X5/8 0.625 144.3942.4 25.2 25.2 2110 234 7.05 274 3340 376 5.82
X1/2 0.500 116.9134.4 32.4 32.4 1740 193 7.11 224 2720 306 5.86
HSS16X16X7/8 0.875 173.4351.0 14.7 14.7 1900 238 6.10 285 3100 398 5.08
X3/4 0.750 150.7544.3 17.7 17.7 1690 211 6.18 250 2720 347 5.12
X5/8 0.625 127.3737.4 22.0 22.0 1450 181 6.23 214 2320 295 5.15
X1/2 0.500 103.3030.4 28.4 28.4 1200 150 6.28 175 1890 240 5.19
X3/8 0.375 78.52 23.1 39.5 39.5 931 116 6.35 134 1450 183 5.23
X5/16 0.313 65.87 19.4 47.9 47.9 790 98.8 6.38 114 1220 154 5.24
HSS14X14X7/8 0.875 149.6144.0 12.4 12.4 1230 176 5.29 213 2030 299 4.42
X3/4 0.750 130.3338.3 15.1 15.1 1100 157 5.36 188 1790 262 4.45
X5/8 0.625 110.3632.4 18.8 18.8 952 136 5.42 161 1530 223 4.49
X1/2 0.500 89.68 26.4 24.4 24.4 791 113 5.47 132 1250 182 4.52
X3/8 0.375 68.31 20.1 34.1 34.1 615 87.9 5.53 102 960 139 4.56
X5/16 0.313 57.36 16.9 41.5 41.5 523 74.7 5.56 86.2 810 117 4.58
HSS12X12X3/4 0.750 109.9132.3 12.4 12.4 666 111 4.54 134 1100 188 3.79
X5/8 0.625 93.34 27.4 15.6 15.6 580 96.7 4.60 116 943 161 3.82
X1/2 0.500 76.07 22.4 20.4 20.4 486 81.0 4.66 95.4 777 132 3.86
X3/8 0.375 58.10 17.1 28.8 28.8 380 63.3 4.71 73.9 599 101 3.89
X5/16 0.313 48.86 14.4 35.1 35.1 324 54.0 4.74 62.6 507 85.4 3.91
X1/4 0.250 39.43 11.6 44.8 44.8 265 44.2 4.78 50.8 410 69.0 3.93
X3/16
0.188 29.84 8.79 60.6 60.6 203 33.8 4.81 38.8 313 52.4 3.95
DIMENSIONS AND SECTION PROPERTIES OF SQUARE HSS
6

8. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/t h/t
I S r Z
Torsion Surface
AreaJ C
in. lb/ft in.
2
in.
4
in.
3
in. in.
3
in.
4
in.
3
ft
2
/ft
HSS10X10X3/4 0.750 89.50 26.3 9.73 9.7 364 72.8 3.72 89.4 610 127 3.12
X5/8 0.625 76.33 22.4 12.4 12.4 321 64.2 3.79 77.6 529 109 3.15
X1/2 0.500 62.46 18.4 16.4 16.4 271 54.2 3.84 64.6 439 89.8 3.19
X3/8 0.375 47.90 14.1 23.5 23.5 214 42.8 3.90 50.4 341 69.3 3.23
X5/16 0.313 40.35 11.9 28.7 28.7 184 36.8 3.93 42.8 289 58.6 3.24
X1/4 0.250 32.63 9.59 36.8 36.8 151 30.2 3.97 34.9 235 47.5 3.26
X3/16 0.188 24.73 7.29 50.0 50.0 116 23.2 3.99 26.7 180 36.2 3.28
HSS9X9X5/8 0.625 67.82 19.9 10.8 10.8 227 50.4 3.38 61.5 377 86.7 2.82
X1/2 0.500 55.66 16.4 14.4 14.4 193 42.9 3.43 51.4 315 71.8 2.86
X3/8 0.375 42.79 12.6 20.8 20.8 154 34.2 3.50 40.3 246 55.6 2.89
X5/16 0.313 36.10 10.6 25.6 25.6 132 29.3 3.53 34.3 209 47.1 2.91
X1/4 0.250 29.23 8.59 32.8 32.8 109 24.2 3.56 28.0 170 38.2 2.93
X3/16 0.188 22.18 6.54 44.7 44.7 84.0 18.7 3.58 21.5 130 29.2 2.95
HSS8X8X5/8 0.625 59.32 17.4 9.20 9.20 153 38.2 2.97 47.2 258 67.0 2.49
X1/2 0.500 48.85 14.4 12.4 12.4 131 32.8 3.02 39.7 217 55.8 2.52
X3/8 0.375 37.69 11.1 18.1 18.1 106 26.5 3.09 31.3 170 43.4 2.56
X5/16 0.313 31.84 9.37 22.4 22.4 91.0 22.8 3.12 26.8 145 36.9 2.58
X1/4 0.250 25.82 7.59 28.8 28.8 75.2 18.8 3.15 21.9 118 30.0 2.60
X3/16 0.188 19.63 5.78 39.4 39.4 58.4 14.6 3.18 16.9 90.8 22.9 2.61
HSS7X7X5/8 0.625 50.81 14.9 7.60 7.60 97.6 27.9 2.56 34.8 166 49.9 2.15
X1/2 0.500 42.05 12.4 10.4 10.4 84.7 24.2 2.61 29.6 141 41.8 2.19
X3/8 0.375 32.58 9.58 15.5 15.5 68.7 19.6 2.68 23.5 112 32.7 2.23
X5/16 0.313 27.59 8.12 19.2 19.2 59.6 17.0 2.71 20.1 95.7 27.9 2.24
X1/4 0.250 22.42 6.59 24.8 24.8 49.4 14.1 2.74 16.5 78.3 22.7 2.26
X3/16 0.188 17.08 5.03 34.0 34.0 38.6 11.0 2.77 12.8 60.3 17.4 2.28
DIMENSIONS AND SECTION PROPERTIES OF SQUARE HSS
7

9. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/t h/t
I S r Z
Torsion Surface
AreaJ C
in. lb/ft in.
2
in.
4
in.
3
in. in.
3
in.
4
in.
3
ft
2
/ft
HSS6X6X5/8 0.625 42.30 12.4 6.00 6.00 57.4 19.1 2.15 24.3 99.5 35.2 1.82
X1/2 0.500 35.24 10.4 8.40 8.40 50.5 16.8 2.20 20.9 85.6 29.8 1.86
X3/8 0.375 27.48 8.08 12.8 12.8 41.6 13.9 2.27 16.8 68.5 23.5 1.89
X5/16 0.313 23.34 6.87 16.0 16.0 36.3 12.1 2.30 14.5 59.0 20.1 1.91
X1/4 0.250 19.02 5.59 20.8 20.8 30.3 10.1 2.33 11.9 48.5 16.5 1.93
X3/16 0.188 14.53 4.28 28.7 28.7 23.8 7.93 2.36 9.26 37.5 12.7 1.95
HSS5-1/2X5-1/2X3/80.375 24.93 7.33 11.5 11.5 31.3 11.4 2.07 13.8 51.9 19.5 1.73
X5/16 0.313 21.21 6.24 14.4 14.4 27.4 10.0 2.10 12.0 44.8 16.7 1.74
X1/4 0.250 17.32 5.09 18.8 18.8 23.0 8.36 2.13 9.91 37.0 13.7 1.76
X3/16 0.188 13.25 3.90 26.1 26.1 18.1 6.58 2.15 7.71 28.7 10.6 1.78
HSS5X5X1/2 0.500 28.43 8.36 6.40 6.40 27.1 10.8 1.80 13.7 46.8 19.8 1.52
X3/8 0.375 22.37 6.58 10.1 10.1 22.8 9.12 1.86 11.2 38.2 15.8 1.56
X5/16 0.313 19.08 5.62 12.8 12.8 20.1 8.04 1.89 9.71 33.1 13.6 1.58
X1/4 0.250 15.62 4.59 16.8 16.8 16.9 6.76 1.92 8.07 27.4 11.2 1.60
X3/16 0.188 11.97 3.53 23.4 23.4 13.4 5.36 1.95 6.31 21.4 8.68 1.61
HSS4-1/2X4-1/2X1/20.500 25.03 7.36 5.40 5.40 18.7 8.31 1.59 10.7 32.7 15.5 1.36
X3/8 0.375 19.82 5.83 8.80 8.80 16.0 7.11 1.66 8.81 27.1 12.6 1.39
X5/16 0.313 16.96 4.99 11.2 11.2 14.2 6.31 1.69 7.69 23.6 10.9 1.41
X1/4 0.250 13.91 4.09 14.8 14.8 12.1 5.38 1.72 6.43 19.7 8.97 1.43
X3/16 0.188 10.70 3.15 20.7 20.7 9.62 4.28 1.75 5.05 15.4 6.97 1.45
HSS4X4X1/2 0.500 21.63 6.36 4.40 4.40 12.3 6.15 1.39 8.02 21.8 11.8 1.19
X3/8 0.375 17.27 5.08 7.47 7.47 10.7 5.35 1.45 6.72 18.4 9.65 1.23
X5/16 0.313 14.83 4.36 9.58 9.58 9.59 4.80 1.48 5.91 16.1 8.39 1.24
X1/4 0.250 12.21 3.59 12.8 12.8 8.22 4.11 1.51 4.97 13.5 6.97 1.26
X3/16 0.188 9.42 2.78 18.1 18.1 6.61 3.30 1.54 3.92 10.7 5.44 1.28
HSS3-1/2X3-1/2X3/80.375 14.72 4.33 6.13 6.13 6.74 3.85 1.25 4.91 11.7 7.12 1.06
X5/16 0.313 12.70 3.74 7.98 7.98 6.11 3.49 1.28 4.36 10.4 6.24 1.08
X1/4 0.250 10.51 3.09 10.8 10.8 5.29 3.02 1.31 3.69 8.82 5.22 1.10
X3/16
0.188 8.15 2.40 15.4 15.4 4.30 2.46 1.34 2.94 7.00 4.10 1.11
DIMENSIONS AND SECTION PROPERTIES OF SQUARE HSS
8

10. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/t h/t
I S r Z
Torsion Surface
AreaJ C
in. lb/ft in.
2
in.
4
in.
3
in. in.
3
in.
4
in.
3
ft
2
/ft
HSS3X3X3/8 0.375 12.17 3.58 4.80 4.80 3.89 2.59 1.04 3.38 6.89 4.96 0.893
X5/16 0.313 10.58 3.11 6.38 6.38 3.59 2.39 1.07 3.04 6.22 4.40 0.910
X1/4 0.250 8.81 2.59 8.80 8.80 3.16 2.11 1.10 2.61 5.35 3.72 0.928
X3/16 0.188 6.87 2.02 12.8 12.8 2.61 1.74 1.14 2.10 4.29 2.95 0.946
HSS2-1/2X2-1/2X5/160.313 8.45 2.49 4.79 4.79 1.88 1.50 0.869 1.96 3.33 2.88 0.744
X1/4 0.250 7.11 2.09 6.80 6.80 1.69 1.35 0.899 1.71 2.92 2.47 0.762
X3/16 0.188 5.59 1.65 10.1 10.1 1.43 1.14 0.931 1.40 2.39 1.98 0.780
HSS2-1/4X2-1/4X1/40.250 6.26 1.84 5.80 5.80 1.17 1.04 0.797 1.33 2.05 1.94 0.678
X3/16 0.188 4.96 1.46 8.77 8.77 1.00 0.8890.828 1.10 1.70 1.57 0.696
HSS2X2X1/4 0.250 5.41 1.59 4.80 4.80 0.7690.7690.695 1.00 1.36 1.47 0.595
X3/16 0.188 4.32 1.27 7.44 7.44 0.6700.6700.7260.841 1.15 1.21 0.613
DIMENSIONS AND SECTION PROPERTIES OF SQUARE HSS
9

11. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/th/t
Axis X-X Axis Y-Y TorsionSurface
AreaI S r Z I S r Z J C
in. lb/ftin.
2
in.
4
in.
3
in.in.
3
in.
4
in.
3
in.in.
3
in.
4
in.
3
ft
2
/ft
HSS24X12X3/40.750 171.1650.312.428.436503048.5238212402074.9723530303915.79
X5/80.625 144.3942.415.634.831302618.5932510701785.0220125903315.82
X1/20.500 116.9134.420.444.425802158.662668831475.0716421202705.86
HSS20X12X3/40.750 150.7544.312.423.123202327.2428710501754.8720223603235.12
X5/80.625 127.3737.415.628.420002007.312459041514.9217220102755.15
X1/20.500 103.3030.420.436.416501657.372017501254.9714116502245.19
X3/80.375 78.5223.128.850.112801287.4415458397.25.0210912701715.23
X5/160.313 65.8719.435.160.710801087.4613049582.55.0591.910701445.24
HSS20X8X5/80.625 110.3632.49.2028.415301536.8719735889.53.321039731784.49
X1/20.500 89.6826.412.436.412701276.9416230075.03.3784.78061464.52
X3/80.375 68.3120.118.150.198898.87.0112523659.03.4365.66251124.56
X5/160.313 57.3616.922.460.784084.07.0510620250.53.4655.653094.64.58
HSS20X4X1/20.500 76.0722.44.4036.488988.96.3012361.630.81.6636.020567.83.86
X3/80.375 58.1017.17.4750.169969.96.3995.350.325.21.7228.516553.23.89
X5/160.313 48.8614.49.5860.759759.76.4480.943.721.81.7424.414345.33.91
X1/40.250 39.4311.612.876.848848.86.4965.736.418.21.7720.011837.03.93
HSS18X6X5/80.625 93.3427.46.0025.29771095.9714416655.32.4664.64891163.82
X1/20.500 76.0722.48.4032.481890.96.0411914247.32.5253.941095.83.86
X3/80.375 58.1017.112.844.864171.26.1292.211337.72.5742.132274.23.89
X5/160.313 48.8614.416.054.354760.86.1678.297.132.42.6035.827562.83.91
X1/40.250 39.4311.620.868.844749.76.2163.580.026.7
2.6329.222451.03.93
HSS16X12X3/40.750 130.3338.312.417.713401685.912058561434.7316817102564.45
X5/80.625 110.3632.415.622.011601455.981757421244.7914414602184.49
X1/20.500 89.6826.420.428.49621206.041446181034.8411812001784.52
X3/80.375 68.3120.128.839.574893.56.1011148280.34.9091.39221364.56
X5/160.313 57.3616.935.147.963679.56.1393.941068.34.9377.37791154.58
DIMENSIONS AND SECTION PROPERTIES OF RECTANGULAR HSS
10

12. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/th/t
Axis X-X Axis Y-Y TorsionSurface
AreaI S r Z I S r Z J C
in. lb/ftin.
2
in.
4
in.
3
in.in.
3
in.
4
in.
3
in.in.
3
in.
4
in.
3
ft
2
/ft
HSS16X8X5/80.625 93.3427.49.2022.08631085.6113729072.53.2584.17231413.82
X1/20.500 76.0722.412.428.472290.25.6811324461.03.3069.75991163.86
X3/80.375 58.1017.118.139.556570.65.7587.619348.23.3654.246589.23.89
X5/160.313 48.8614.422.447.948260.25.7974.316541.23.3946.039575.43.91
X1/40.250 39.4311.628.860.839349.15.8260.313533.83.4137.432161.03.93
HSS16X4X5/80.625 76.3322.42.8022.056871.05.0498.556.428.21.5934.218263.93.15
X1/20.500 62.4618.44.4028.448160.15.1182.249.324.61.6429.015753.83.19
X3/80.375 47.9014.17.4739.538247.85.2164.240.420.21.6923.012742.33.23
X5/160.313 40.3511.99.5847.932841.05.2554.635.217.61.7219.811036.13.24
X1/40.250 32.639.5912.860.826933.65.3044.529.314.61.7516.290.629.53.26
X3/160.188 24.737.2918.181.920826.05.3434.123.011.51.7812.570.322.63.28
HSS14X10X5/80.625 93.3427.412.418.87281045.1512743186.23.971018851563.82
X1/20.500 76.0722.416.424.460886.95.2110536172.24.0183.67301283.86
X3/80.375 58.1017.123.534.147668.05.2881.528456.84.0864.856498.23.89
X5/160.313 48.8614.428.741.540658.05.3169.124248.44.1055.047882.93.91
X1/40.250 39.4311.636.852.833147.35.3456.019839.64.1344.638767.03.93
HSS14X6X5/80.625 76.3322.46.0018.850472.04.7494.013043.32.4151.235288.93.15
X1/20.500 62.4618.48.4024.442660.94.8178.311137.02.4642.929673.83.19
X3/80.375 47.9014.112.834.133748.14.8961.189.129.72.5133.623357.33.23
X5/160.313 40.3511.916.041.528941.34.9351.976.925.62.5428.719948.63.24
X1/40.250 32.639.5920.852.823733.94.9742.363.421.1
2.5723.416239.53.26
X3/160.188 24.737.2928.771.318226.05.0032.449.216.42.6018.012530.23.28
HSS14X4X5/80.625 67.8219.92.8018.839256.04.4477.349.224.61.5730.015455.52.82
X1/20.500 55.6616.44.4024.433547.94.5264.843.121.61.6225.513446.82.86
X3/80.375 42.7912.67.4734.126738.14.6050.835.417.71.6820.310836.82.89
X5/160.313 36.1010.69.5841.523032.94.6643.430.915.41.7117.493.231.52.91
X1/40.250 29.238.5912.852.818927.04.6935.425.812.91.7314.377.025.72.93
X3/160.188 22.186.5418.171.314721.04.7427.220.310.21.7611.159.819.82.95
DIMENSIONS AND SECTION PROPERTIES OF RECTANGULAR HSS
11

13. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/th/t
Axis X-X Axis Y-Y TorsionSurface
AreaI S r Z I S r Z J C
in. lb/ftin.
2
in.
4
in.
3
in.in.
3
in.
4
in.
3
in.in.
3
in.
4
in.
3
ft
2
/ft
HSS12X10X1/20.500 69.2720.416.420.441969.84.5383.931663.23.9474.15811093.52
X3/80.375 53.0015.623.528.833055.04.6065.224949.84.0057.645083.73.56
X5/160.313 44.6013.128.735.128247.04.6455.321342.64.0348.938170.83.58
X1/40.250 36.0310.636.844.823038.34.6644.917434.84.0539.730957.23.60
HSS12X8X5/80.625 76.3322.49.2015.641969.84.3287.122155.23.1465.64811043.15
X1/20.500 62.4618.412.420.435358.84.3872.418847.03.2054.740185.83.19
X3/80.375 47.9014.118.128.827946.54.4556.514937.23.2542.731266.33.23
X5/160.313 40.3511.922.435.123939.84.4848.012832.03.2836.426556.13.24
X1/40.250 32.639.5928.844.819632.74.5239.110526.23.3129.621645.53.26
X3/160.188 24.737.2939.460.615125.24.5529.981.320.33.3422.716534.73.28
HSS12X6X5/80.625 67.8219.96.0015.633856.34.1272.911237.32.3744.528675.52.82
X1/20.500 55.6616.48.4020.428747.84.1860.996.032.02.4237.424162.82.86
X3/80.375 42.7912.612.828.822838.04.2547.777.325.82.4829.419048.82.89
X5/160.313 36.1010.616.035.119632.74.3040.766.722.22.5125.116241.52.91
X1/40.250 29.238.5920.844.816126.84.3333.255.218.42.5320.613233.72.93
X3/160.188 22.186.5428.760.612520.84.3725.542.914.32.5615.810225.82.95
HSS12X4X5/80.625 59.3217.42.8015.625742.83.8458.642.021.01.5525.812747.02.49
X1/20.500 48.8514.44.4020.422136.83.9249.437.018.51.6022.011039.82.52
X3/80.375 37.6911.17.4728.817829.74.0039.030.515.21.6617.689.031.42.56
X5/160.313 31.849.379.5835.115325.54.0433.426.713.41.6915.177.026.92.58
X1/40.250 25.827.5912.844.812721.24.0927.322.311.2
1.7112.563.622.02.60
X3/160.188 19.635.818.160.698.416.44.1221.017.58.751.749.6649.416.92.61
HSS12X3-1/2X3/80.375 36.4110.76.1328.816527.53.9336.822.412.81.4514.968.327.02.48
X5/160.313 30.789.067.9835.114323.83.9731.619.711.31.4712.859.423.22.49
HSS12X3X5/160.313 29.728.756.3835.113222.03.8829.713.89.201.2610.643.719.52.41
X1/40.250 24.127.098.8044.810918.23.9224.411.77.801.288.8036.516.12.43
X3/160.188 18.355.4112.860.68514.23.9618.89.306.201.316.8628.712.52.45
DIMENSIONS AND SECTION PROPERTIES OF RECTANGULAR HSS
12

14. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/th/t
Axis X-X Axis Y-Y TorsionSurface
AreaI S r Z I S r Z J C
in. lb/ftin.
2
in.
4
in.
3
in.in.
3
in.
4
in.
3
in.in.
3
in.
4
in.
3
ft
2
/ft
HSS12X2X5/160.313 27.598.123.1935.111118.53.7026.15.335.330.8106.3918.412.22.24
X1/40.250 22.426.594.8044.892.215.43.7421.44.624.620.8375.3815.910.22.26
X3/160.188 17.085.037.4460.672.212.03.7916.63.773.770.8664.2512.88.022.28
HSS10X8X5/80.625 67.8219.99.2012.426653.23.6665.918746.83.0756.436785.52.82
X1/20.500 55.6616.412.416.422645.23.7155.116040.03.1247.230670.82.86
X3/80.375 42.7912.618.123.518036.03.7843.112731.83.1737.023954.82.89
X5/160.313 36.1010.622.428.715430.83.8136.811027.53.2231.620346.52.91
X1/40.250 29.238.5928.836.812725.43.8530.090.222.63.2425.816637.72.93
X3/160.188 22.186.5439.450.098.119.63.8723.069.817.43.2719.812728.82.95
HSS10X6X5/80.625 59.3217.46.0012.421142.23.4854.293.631.22.3237.722162.02.49
X1/20.500 48.8514.48.4016.418136.23.5545.680.927.02.3731.918751.82.52
X3/80.375 37.6911.112.823.514529.03.6135.965.421.82.4325.214740.42.56
X5/160.313 31.849.3716.028.712525.03.6530.756.618.92.4621.612634.42.58
X1/40.250 25.827.5920.836.810320.63.6825.146.915.62.4917.710328.02.60
X3/160.188 19.635.7828.750.080.016.03.7219.336.512.22.5113.679.321.42.61
HSS10X5X3/80.375 35.1310.310.123.512825.63.5332.342.917.22.0419.910733.22.39
X5/160.313 29.728.7512.828.711022.03.5527.737.314.92.0617.091.628.32.41
X1/40.250 24.127.0916.836.891.218.23.5922.731.112.42.0914.075.223.12.43
X3/160.188 18.355.4123.450.070.914.23.6217.524.39.722.1210.858.117.72.45
HSS10X4X5/80.625 50.8114.92.8012.415631.23.2442.534.817.41.5321.610038.62.15
X1/20.500 42.0512.44.4016.413627.23.3136.130.815.4
1.5818.586.932.82.19
X3/80.375 32.589.587.4723.511022.03.3928.725.512.81.6314.970.426.02.23
X5/160.313 27.598.129.5828.795.619.13.4324.622.411.21.6612.860.922.22.24
X1/40.250 22.426.5912.836.879.315.93.4720.218.89.401.6910.650.418.22.26
X3/160.188 17.085.0318.150.061.912.43.5115.614.87.401.728.2239.214.02.28
DIMENSIONS AND SECTION PROPERTIES OF RECTANGULAR HSS
13

15. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/th/t
Axis X-X Axis Y-Y TorsionSurface
AreaI S r Z I S r Z J C
in. lb/ftin.
2
in.
4
in.
3
in.in.
3
in.
4
in.
3
in.in.
3
in.
4
in.
3
ft
2
/ft
HSS10X3-1/2X1/20.500 40.3411.93.4016.412424.83.2333.722.312.71.3715.566.228.02.11
X3/80.375 31.319.206.1323.510220.43.3326.918.710.71.4312.554.322.42.14
X5/160.313 26.537.817.9828.788.217.63.3623.116.59.431.4510.847.319.22.16
X1/40.250 21.576.3410.836.873.414.73.4019.013.97.941.488.9839.315.82.18
X3/160.188 16.444.8415.450.057.411.53.4414.711.06.291.516.9930.712.22.20
HSS10X3X3/80.375 30.038.834.8023.592.818.63.2425.113.08.671.2110.339.818.72.06
X5/160.313 25.467.496.3828.780.916.23.2921.611.57.671.248.9334.916.22.08
X1/40.250 20.726.098.8036.867.413.53.3317.89.796.531.277.4229.313.32.10
X3/160.188 15.804.6612.850.052.810.63.3713.87.825.211.305.8023.010.32.11
HSS10X2X3/80.375 27.488.082.1323.575.415.13.0521.54.874.870.7766.0516.511.51.89
X5/160.313 23.346.873.1928.766.213.23.1018.64.434.430.8035.3414.910.11.91
X1/40.250 19.025.594.8036.855.611.13.1515.43.853.850.8304.5012.88.471.93
X3/160.188 14.534.287.4450.043.88.83.2011.93.153.150.8583.5710.46.661.95
HSS9X7X5/80.625 59.3217.47.6010.818340.73.2451.012335.12.6642.824865.82.49
X1/20.500 48.8514.410.414.415734.93.3042.910630.32.7136.120954.82.52
X3/80.375 37.6911.115.520.812628.03.3733.885.224.32.7728.416442.72.56
X5/160.313 31.849.3719.225.610824.03.4028.973.621.02.8024.314036.22.58
X1/40.250 25.827.5924.832.889.419.93.4323.660.817.42.8319.911429.52.60
X3/160.188 19.635.7834.044.769.415.43.4718.247.313.52.8615.387.922.52.61
HSS9X5X5/80.625 50.8114.94.4010.813930.93.0540.554.121.61.9126.613544.92.15
X1/20.500 42.0512.46.4014.412126.93.1234.447.419.0
1.9622.711537.82.19
X3/80.375 32.589.5810.120.897.821.73.2027.338.915.62.0218.192.229.72.23
X5/160.313 27.598.1212.825.684.718.83.2323.433.913.62.0415.679.325.42.24
X1/40.250 22.426.5916.832.870.315.63.2719.328.211.32.0712.865.220.72.26
X3/160.188 17.085.0323.444.754.812.23.3014.922.18.842.109.9350.415.92.28
HSS9X3X1/20.500 35.2410.42.4014.484.518.82.8525.913.79.131.1511.341.620.81.86
X3/80.375 27.488.084.8020.869.915.52.9420.911.77.801.209.2934.916.81.89
X5/160.313 23.346.876.3825.661.113.62.9818.010.46.931.238.0930.614.51.91
X1/40.250 19.025.598.8032.851.111.43.0214.98.855.901.266.7325.612.01.93
X3/160.188 14.534.2812.844.740.28.933.0611.67.074.711.295.2720.29.291.95
DIMENSIONS AND SECTION PROPERTIES OF RECTANGULAR HSS
14

16. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/th/t
Axis X-X Axis Y-Y TorsionSurface
AreaI S r Z I S r Z J C
in. lb/ftin.
2
in.
4
in.
3
in.in.
3
in.
4
in.
3
in.in.
3
in.
4
in.
3
ft
2
/ft
HSS8X6X5/80.625 50.8114.96.009.2011929.82.8338.075.525.22.2531.015848.62.15
X1/20.500 42.0512.48.4012.410325.82.8832.265.721.92.3026.413540.82.19
X3/80.375 32.589.5812.818.183.720.92.9625.653.517.82.3621.010732.02.23
X5/160.313 27.598.1216.022.472.518.12.9922.046.515.52.3918.091.427.22.24
X1/40.250 22.426.5920.828.860.115.03.0218.038.612.92.4214.874.922.22.26
X3/160.188 17.085.0328.739.446.911.73.0513.930.210.12.4511.457.717.02.28
HSS8X4X5/80.625 42.3012.42.809.2085.221.32.6228.827.613.81.4917.373.230.21.82
X1/20.500 35.2410.44.4012.475.218.82.6924.724.612.31.5415.064.125.81.86
X3/80.375 27.488.087.4718.161.915.52.7719.920.610.31.6012.252.220.51.89
X5/160.313 23.346.879.5822.454.013.52.8017.118.19.051.6210.545.217.61.91
X1/40.250 19.025.5912.828.845.111.32.8414.115.37.651.658.7237.514.51.93
X3/160.188 14.534.2818.139.435.48.852.8811.012.16.051.686.7929.211.21.95
HSS8X3X1/20.500 31.849.362.4012.461.115.32.5521.012.18.071.1410.135.718.31.69
X3/80.375 24.937.334.8018.151.012.82.6417.010.46.931.198.3129.914.81.73
X5/160.313 21.216.246.3822.444.811.22.6814.79.266.171.227.2526.312.81.74
X1/40.250 17.325.098.8028.837.69.402.7212.27.905.271.256.0522.110.61.76
X3/160.188 13.253.9012.839.429.77.422.769.516.334.221.274.7417.48.231.78
HSS8X2X3/80.375 22.376.582.1318.140.110.02.4714.23.863.860.7664.8312.69.091.56
X5/160.313 19.085.623.1922.435.58.882.5112.33.533.530.7934.2811.48.001.58
X1/40.250 15.624.594.8028.830.17.522.5610.33.083.080.8193.639.846.721.60
X3/160.188 11.973.537.4439.423.95.982.608.042.532.53
0.8472.897.955.301.61
HSS7X5X1/20.500 35.2410.46.4010.463.518.12.4723.137.314.91.8918.279.928.81.86
X3/80.375 27.488.0810.115.552.214.92.5418.530.812.31.9514.664.222.81.89
X5/160.313 23.346.8712.819.245.513.02.5716.027.010.81.9812.655.419.51.91
X1/40.250 19.025.5916.824.838.010.92.6113.222.69.042.0110.445.616.01.93
X3/160.188 14.534.2823.434.029.88.512.6410.217.87.122.048.1235.312.31.95
DIMENSIONS AND SECTION PROPERTIES OF RECTANGULAR HSS
15

17. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/th/t
Axis X-X Axis Y-Y TorsionSurface
AreaI S r Z I S r Z J C
in. lb/ftin.
2
in.
4
in.
3
in.in.
3
in.
4
in.
3
in.in.
3
in.
4
in.
3
ft
2
/ft
HSS7X4X1/20.500 31.849.364.4010.452.915.12.3819.821.610.81.5213.353.022.31.69
X3/80.375 24.937.337.4715.544.012.62.4516.018.19.051.5710.843.317.81.73
X5/160.313 21.216.249.5819.238.511.02.4813.916.08.001.609.3737.615.31.74
X1/40.250 17.325.0912.824.832.39.232.5211.513.56.751.637.7831.212.61.76
X3/160.188 13.253.9018.134.025.57.292.568.9310.75.351.666.0724.39.741.78
HSS7X3X1/20.500 28.438.362.4010.442.312.12.2516.610.57.001.128.8429.815.81.52
X3/80.375 22.376.584.8015.535.710.22.3313.59.106.071.187.3225.112.81.56
X5/160.313 19.085.626.3819.231.59.002.3711.88.135.421.206.4122.111.11.58
X1/40.250 15.624.598.8024.826.67.602.419.86.954.631.235.3618.59.221.60
X3/160.188 11.973.5312.834.021.16.032.447.655.583.721.264.2114.67.181.61
HSS7X2X1/40.250 13.914.094.8024.820.95.972.268.102.702.700.8123.198.365.851.43
3X160.188 10.703.157.4434.016.74.772.306.372.222.220.8402.546.764.621.45
HSS6X5X1/20.500 31.849.366.408.4043.014.32.1418.132.212.91.8516.062.924.31.69
X3/80.375 24.937.3310.112.835.711.92.2114.726.810.71.9112.950.919.31.73
X5/160.313 21.216.2412.816.031.310.42.2412.723.59.401.9411.244.016.61.74
X1/40.250 17.325.0916.820.826.28.732.2710.519.87.921.979.2636.313.61.76
X3/160.188 13.253.9023.428.720.76.902.308.1715.66.242.007.2128.210.51.78
HSS6X4X1/20.500 28.438.364.408.4035.411.82.0615.418.59.251.4911.542.118.81.52
X3/80.375 22.376.587.4712.829.79.92.1212.515.77.851.549.4434.615.11.56
X5/160.313 19.085.629.5816.026.28.732.1610.913.96.951.578.2230.113.01.58
X1/40.250 15.624.5912.820.822.17.372.199.0611.75.85
1.606.8425.010.71.60
X3/160.188 11.973.5318.128.717.55.832.237.079.344.671.635.3619.68.301.61
HSS6X3X1/20.500 25.037.362.408.4027.89.271.9412.68.965.971.107.5923.913.31.36
X3/80.375 19.825.834.8012.823.87.932.0210.47.805.201.166.3420.310.91.39
X5/160.313 16.964.996.3816.021.17.032.069.126.994.661.185.5617.99.451.41
X1/40.250 13.914.098.8020.817.95.972.097.626.004.001.214.6715.17.851.43
X3/160.188 10.703.1512.828.714.34.772.135.984.843.231.243.6911.96.121.45
DIMENSIONS AND SECTION PROPERTIES OF RECTANGULAR HSS
16

18. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/th/t
Axis X-X Axis Y-Y TorsionSurface
AreaI S r Z I S r Z J C
in. lb/ftin.
2
in.
4
in.
3
in.in.
3
in.
4
in.
3
in.in.
3
in.
4
in.
3
ft
2
/ft
HSS6X2X3/80.375 17.275.082.1312.817.85.931.878.332.852.850.7493.618.726.651.23
X5/160.313 14.834.363.1916.016.15.371.927.342.622.620.7753.237.945.891.24
X1/40.250 12.213.594.8020.813.84.601.966.182.312.310.8022.756.884.971.26
X3/160.188 9.422.787.4428.711.13.702.004.891.911.910.8292.205.583.931.28
HSS5X4X1/20.500 25.037.364.406.4022.08.801.7311.515.47.701.459.7731.715.31.36
X3/80.375 19.825.837.4710.118.87.521.809.4413.26.601.508.0826.312.41.39
X5/160.313 16.964.999.5812.816.66.641.828.2511.75.851.537.0622.910.71.41
X1/40.250 13.914.0912.816.814.15.641.866.8910.05.001.565.9019.18.851.43
X3/160.188 10.703.1518.123.411.34.521.895.407.983.991.594.6415.06.871.45
HSS5X3X1/20.500 21.636.362.406.4016.96.761.639.207.374.911.086.3418.210.81.19
X3/80.375 17.275.084.8010.114.75.881.707.716.504.331.135.3515.68.901.23
X5/160.313 14.834.366.3812.813.25.281.746.785.863.911.164.7213.87.771.24
X1/40.250 12.213.598.8016.811.34.521.775.705.053.371.193.9811.76.471.26
X3/160.188 9.422.7812.823.49.083.631.814.504.092.731.213.169.235.061.28
HSS5X2-1/2X1/40.250 11.363.346.8016.89.93.961.725.113.282.620.9913.128.365.281.18
X3/160.188 8.782.5910.123.47.993.201.764.052.692.151.022.496.684.161.20
HSS5X2X3/80.375 14.724.332.1310.110.724.291.575.982.352.350.7373.006.825.431.06
X5/160.313 12.703.743.1912.89.763.901.625.312.172.170.7622.706.244.831.08
X1/40.250 10.513.094.8016.88.483.391.664.511.931.930.7902.325.434.101.10
X3/160.188 8.152.407.4423.46.902.761.703.591.601.600.8161.864.413.251.11
HSS4X3X3/80.375 14.724.334.807.478.234.121.385.365.193.46
1.094.3711.16.931.06
X5/160.313 12.703.746.389.587.463.731.414.754.723.151.123.889.906.081.08
X1/40.250 10.513.098.8012.86.463.231.454.034.112.741.153.308.415.101.10
X3/160.188 8.152.4012.818.15.242.621.483.213.352.231.182.636.684.001.11
HSS4X2-1/2X3/80.375 13.443.953.477.477.003.501.334.683.272.620.9103.337.865.570.976
X5/160.313 11.643.424.799.586.393.201.374.183.012.410.9382.997.094.930.994
X1/40.250 9.662.846.8012.85.582.791.403.562.652.120.9662.566.094.161.01
X3/160.188 7.512.2110.118.14.562.281.442.852.181.740.9932.054.893.291.03
DIMENSIONS AND SECTION PROPERTIES OF RECTANGULAR HSS
17

19. Shape
Design Wall
Thickness, t
Nominal
Wt
Area, A
b/th/t
Axis X-X Axis Y-Y TorsionSurface
AreaI S r Z I S r Z J C
in. lb/ftin.
2
in.
4
in.
3
in.in.
3
in.
4
in.
3
in.in.
3
in.
4
in.
3
ft
2
/ft
HSS4X2X3/80.375 12.173.582.137.475.762.881.274.001.841.840.7172.394.974.210.893
X5/160.313 10.583.113.199.585.332.661.313.601.721.720.7442.174.583.780.910
X1/40.250 8.812.594.8012.84.702.351.353.091.541.540.7711.884.013.220.928
X3/160.188 6.872.027.4418.13.881.941.392.491.291.290.7991.523.272.570.946
HSS3-1/2X2-1/2X3/80.375 12.173.583.476.134.902.801.173.742.842.270.8912.946.384.780.893
X5/160.313 10.583.114.797.984.512.581.203.362.632.100.9202.645.794.240.910
X1/40.250 8.812.596.8010.83.972.271.242.882.331.860.9482.284.993.600.928
X3/160.188 6.872.0210.115.43.271.871.272.321.931.540.9771.834.022.850.946
HSS3-1/2X2X1/40.250 7.962.344.8010.83.311.891.192.481.351.350.7601.663.312.780.845
X3/160.188 6.231.847.4415.42.751.571.222.011.131.130.7841.352.712.230.863
HSS3-1/2X1-1/2X1/40.250 7.112.092.8010.82.651.511.132.070.6590.8790.5621.111.861.970.762
X3/160.188 5.591.654.7815.42.241.281.171.700.5690.7590.5870.9171.571.610.780
HSS3X2-1/2X5/160.313 9.512.804.796.383.022.011.042.622.261.810.8982.304.533.560.827
X1/40.250 7.962.346.808.802.681.791.072.272.011.610.9271.993.933.030.845
X3/160.188 6.231.8410.112.82.231.491.101.841.681.340.9561.623.192.420.863
HSS3X2X5/160.313 8.452.493.196.382.451.630.9922.201.271.270.7141.642.972.720.744
X1/40.250 7.112.094.808.802.211.471.031.921.151.150.7421.442.632.350.762
X3/160.188 5.591.657.4412.81.861.241.061.570.9800.9800.7711.182.171.890.780
HSS3X1-1/2X1/40.250 6.261.842.808.801.741.160.9721.580.5600.7470.5520.9491.501.660.678
X3/160.188 4.961.464.7812.81.490.9931.011.310.4880.6510.5780.7941.271.360.696
HSS3X1X3/160.188 4.321.272.1212.81.120.7470.9391.040.1780.356
0.3740.4520.5460.8330.613
HSS2-1/2X2X1/40.250 6.261.844.806.801.381.100.8661.430.9620.9620.7231.221.981.910.678
X3/160.188 4.961.467.4410.11.170.9360.8951.180.8250.8250.7521.011.641.550.696
HSS2-1/2X1-1/2X1/40.250 5.411.592.806.801.060.8480.8161.150.4610.6150.5380.7931.141.350.595
HSS2-1/2X1-1/2X3/160.188 4.321.274.7810.10.9230.7380.8530.9650.4070.5430.5660.6700.9771.110.613
HSS2-1/2X1X3/160.188 3.681.082.1210.10.6710.5370.7880.7480.1470.2940.3690.3760.4270.6800.530
HSS2-1/4X2X3/160.188 4.641.377.448.770.9010.8010.8111.010.7480.7480.7390.9271.391.380.655
HSS2X1-1/2X3/160.188 3.681.084.787.440.5150.5150.6910.6710.3250.4330.5490.5470.6960.8680.530
HSS2X1X3/160.188 3.040.8962.127.440.3600.3600.6340.5010.1150.2300.3580.3000.3110.5280.446
DIMENSIONS AND SECTION PROPERTIES OF RECTANGULAR HSS
18