Velocity Violation Monitoring And Charge System.pptx

Project Presentation

1. Velocity Violation Monitoring And Charge System Addressing the Challenges and Solutions for Safer Two-wheeler Travel Project Supervisor Ms. Mamta Rani Team Members Bhavika Saini Deepak Vijay Divyanshi Upreti Harsh Rawal

2. Project Overview Real-time Overspeed Detection: Implementing a system for immediate detection of over speeding events to ensure timely intervention and safety measures. Integrated Notification System: Incorporating advanced technologies like GSM for SMS notifications and GPS for location tracking to enhance user compliance and safety.

3. Components for alert: Utilizing Arduino-based embedded system, buzzer, and display for real-time alerts and notifications. Implement an automated billing system for enforcing speed limits and imposing fines on violators Charge system:

4. Hardware Components 1.Arduino UNO 2.GSM Module (SIM800) 3.GPS Module (SIM28) 4. LCD Display and buzzer 5.DC motor and battery(12V) 6. IC and cables

5. Schematic Diagram

6. Hardware Setup

7. Software Setup

8. Responsibilities of Members Bhavika Saini: She is Responsible for writing and programming code for integrating GSM ,GPS module to Arduino board(UNO), also for developing the SMS notification system in Arduino IDE. Divyanshi Upreti : She is Responsible for implementing warning and alert system using Buzzer activation ,also for overspeed detection algorithm and speed sensing. It includes writing codes for these in Arduino IDE. Software Team

9. Hardware Team Deepak Vijay: He is Responsible for selection of all the Hardware components and their connections, also for physically assembling these components to the Arduino Board and with each other using cables , connectors and IC. Harsh Rawal: He is Responsible for researching and integrating the appropriate components, also for documenting all these things as instructions and for creating the rough architecture and diagrams.

10. Conclusion Conduct thorough testing and debugging to validate the effectiveness of the refined algorithm. Writing and programming the software for overspeed detection has been done. Collection and setup of hardware components has been done along with wiring. Setting up of GSM module and GPS module along with display has been done. Next Steps Implementing some adjustments to GSM module for SMS notifications. Perform final touch-ups on the hardware setup.