Waterguard grs

fairmatechemical 288 views 11 slides Aug 01, 2016
Slide 1
Slide 1 of 11
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11

About This Presentation

WATERGUARD GRS is a polyester nonwoven felt, reinforced with glass filament for greater durability
It is based on technology developed by the FAIRMATE through continuous research and more than 30 years of experience in the waterproofing market
WATERGUARD GRS is a high performance product that can sa...


Slide Content

WATERGUARD GRS
POLYESTER NON-WOVEN GLASS REINFORCED FIBRE MATT
FOR LIQUID WATERPROOFING

PET nonwovens Coated with bitumen Application:
Waterproofing of roofs

Liquid waterproofing technology is used for the waterproofing of roofs
Chemical compounds are applied to surfaces in liquid form and dry quickly to form a solid
waterproof Membrane
Characteristics
Seamless membranes: no joints vulnerable to water penetration
Ease and speed of installation: fast and easy to install
Long life: liquid waterproofing systems can provide a long-term lifespan in excess of 25
years
Versatile: can be used on flat, pitched even domed roofs
Method of installation
A liquid primer is first applied on the roofing surface
After allowing the primer to dry, the carrier (reinforcement) is laid on top
The carrier is allowed to saturate fully and glued to the surface
After the reinforcement dries fully, 2-3 courses of waterproofing liquid are added
After curing, a resilient, fully bonded sheet is obtained which forms a good waterproofing
layer
Liquid Waterproofing : IntroductionLiquid Waterproofing : Introduction

The carrier is responsible for the stability of the waterproofing membrane
The carrier has to have high thermal stability and durability
The carrier should also be flexible, as over a period of time small stresses
can cause ruptures in the membrane if it is breakable
The carrier should also be easily impregnable
Function of the CareerFunction of the Career
Liquid waterproofing with carrier

Evolution of Carriers for Liquid WaterproofingEvolution of Carriers for Liquid Waterproofing
WATERGUARD GRSWATERGUARD GRS

Liquid waterproofing with WATERGUARD GRSLiquid waterproofing with WATERGUARD GRS
Realize the benefits of liquid waterproofing better by using WATERGUARD
GRS
The polyester nonwoven with reinforcement of glass filaments
WATERGUARD GRS

What is WATERGUARD GRSWhat is WATERGUARD GRS
WATERGUARD GRS is a polyester nonwoven felt, reinforced with glass filament for
greater durability
It is based on technology developed by the FAIRMATE through continuous research
and more than 30 years of experience in the waterproofing market
WATERGUARD GRS is a high performance product that can satisfy a broad range of
reinforcement requirements and the most demanding specifications.
It combines the advantages of PET nonwovens with the strength of glass.
By using WATERGUARD GRS, less liquid compounds are needed, resulting in lower
costs
It is easier to control the thickness of the waterproofing membranes when
WATERGUARD GRS is used, thus the water proofing membrane is more uniform

What is WATERGUARD GRSWhat is WATERGUARD GRS
Technical specifications

Why WATERGUARD GRS as a carrier ?Why WATERGUARD GRS as a carrier ?
WATERGUARD GRS OTHER SUBSTRATES
Made of polyester, hence high
durability and flexibility
High resistance to tear
High stability during
application
Longer life
Less durability and flexibility
More susceptible to tear
Low elongation at break, more
unstable
Shorter life due to poorer
quality of mater

Comparison of WATERGUARD GRS with Glass NonwovensComparison of WATERGUARD GRS with Glass Nonwovens
GLASS NONWOVENS GLASS NONWOVENS
WATERGUARD GRSWATERGUARD GRS

WATERGUARD GRS in liquid waterproofing
WATERGUARD GRS
being laid on top of first liquid layer
Second liquid layer being applied over
WATERGUARD GRS