Wooden false ciling

abhisheksaxena9279 13,401 views 17 slides Mar 07, 2015
Slide 1
Slide 1 of 17
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15
Slide 16
16
Slide 17
17

About This Presentation

Wooden ceiling types & detail of laying method with isometric section


Slide Content

Wooden False Ceiling

INDEX

WOODEN CEILING IS USED AS PRIMARY AS WELL AS SECONDARY CEILING. PRIMARY:- ROOF STRUCTURE SECONDARY:- FALSE CEILING IT IS USED BOTH FOR PROVIDING ROOFING AND FOR AESTHETICAL PURPOSE IN A BUILDING. IT CAN BE USED BOTH FOR DOMESTIC AND COMMERCIAL PURPOSE. INTRODUCTION

These are of following types:- Drop ceiling Ceiling tiles Plank ceiling(tongue and groove) Coffered ceiling Suspended ceiling CEILING TYPES

Drop Ceiling A drop ceiling has two parts: drop panels and a suspended metal grid, which hangs below an existing ceiling.

Laying method

Ceiling Tile Ceiling tiles are standard 12" x 12" or 16" x 16" squares that are attached to an existing ceiling with easy-to-install tracks and clips, nails, or glue.

Laying method

Plank Ceiling Tongue and groove ceilings look like real wood and can be attached directly to an existing ceiling or inserted into a suspended grid system.

Laying method

Coffered Ceiling Coffered ceilings are formed with recessed panels surrounded by dropped beams that create a grid pattern. It's a classic ceiling design from Greek and Roman architecture.

Laying method

Suspended Ceiling A  non structural  ceiling  suspended  below the overhead structural slab  or from  the  structural elements  of a building  andnot  bearing  onto the   walls is known as suspended ceiling.

Laying method

The material used in false ceiling is made up of either hard wood(mainly teak logs) or MDF(Medium Density Fibre). In Medium Density Fibre mica is glued on either side of the board. Manufacturing The one on the inner side of the board is known as BALANCED SURFACE. And the one on the external side i.e , the visible surface is known as the FINISHED SURFACE. Whereas the wood gives its natural finish when polished.

Pros And Cons Advantages :- Provides decorative and artistic look to the room. Provides better insulation. It is popular and gives a warm feeling to the room. It is stylish in design. Disadvantages:- It is very expensive. It is more prone to termite attack. It has weak difficult structure. It is difficult to clean.

EFFORTED BY:- ABHISHEK SAXENA B.Arch
Tags