Case study- bcm kitchen.pptx............

case study

1. Case study : kitchen INTERIOR AND MATERIALS group - 3 Presented by : 22/ARCH/003 22/ARCH/010 22/ARCH/014 22/ARCH/016 22/ARCH/017 22/ARCH/018 22/ARCH/022 22/ARCH/023 22/ARCH/028 22/ARCH/029

2. LOCATION : CHAWNPUI OWNER : PU HMINGA

3. CONTENTS: PLAN OF THE KITCHEN INSIDE THE KITCHEN MATERIAL STUDY DIMENSIONS

4. FLOOR PLAN OF THE KITCHEN

5. INSIDE THE KITCHEN

6. MATERIAL STUDY : kitchen cabinets 1 – the material they use is a ceramic tile which are often used in kitchen 2 – they are also ceramic tiles of different patterns 3 – for the kitchen cabinet at the top they use no 2 BSB mdf board (both side balancing white) 4 – the vertical members are same as 3 and for the horizontal member they use no 2 BSB mdf board 1 2 3 4

7. 1 2 3 4 1 – for the back of the cabinet they use 8 mm thick BSB mdf board 2 – for the partition wall in the cabinet they use 12 mm thick BSB mdf board 3 – for some other parts of they use 17 mm thick BSB mdf board 4 – and for the down part of the cabinet they use 6 mm thick BSB mdf board

8. They also insert a stainless steel pull-out-shelf adjustable kitchen elevator basket right beside the gas area. They are used to store different kitchenware, snacks, condiments, etc. The size of these varies and the one used here is 900 mm wide basket

9. Kitchen corner baskets are also installed in the lower part of the cabinet. In the corner dead space these are installed and are an adjustable pull-out-shelf.

10. Material study – kitchen countertop The countertop is rcc and on top of this they plan to install a granite for the finishing The highlighted part is made hollow to install a gas stove and to make it easier to connect the gas cylinders

11. dimensions Height of the countertop – 750 mm Width of the countertop – 600 mm Width of the cabinets – 600mm