Engineering Graphics

Engineering Graphics For 1st sem
Basics on Engineering Graphics

1. ENGINEERING
GRAPHICS
FOR DIPLOMA AND ENGINEERING STUDENTS

2. ENGINEERING
GRAPHICS
FOR DIPLOMA AND ENGINEERING STUDENTS

3. \
●BY
●S.R.P

4. ENGINEERING
GRAPHICS
FOR DIPLOMA AND ENGINEERING STUDENTS

5. \
●BY
●S.R.P

6. TOPICS
●INTRODUCTION TO ENGINEERING GRAPHICS
●LINES,LETTERING AND DIMENSIONING
●GEOMETRICAL CONSTRUCTIONS
●SCALES
●CONIC SECTIONS
●MISCELLENOUS CURVES

7. INTRODUCTION TO ENGINEERING GRAPHICS
Drawings prepared by Engineers of engineering
objects are known as Engineering Drawings
●Engineering Graphics is a Graphics Language
used by Engineers to convey ideas of an object
clearly and accurately.
●BIS (Bureau of Indian Standards) has published
various standards for different subjects.

8. DRAWING INSTRUMENTS
●Drawing Board
●T square or Mini Drafter
●Set Square
●Protractor(180deg-360deg)
●Engineers Scale Set
●Instrument Box
●Stencil
●French Curve
●Ruling Pens

9. DRAWING BOARD

10. ●A Drawing Board is rectangular in
shape and is well seasoned good
quality.
●Drawing Boards are made up of
various sizes.
●

12. T- SQUARE

13. ●T Square consists of 2 parts a long strip called
blade and a short strip called Head.

14. ●Set Square:

15. ●Protractor:

16. ●Instrument Box:1)Large Bow Compass
2) Spring Bow Compass
3) Divider

17. Drawing Sheet

18. Paper Fastener

19. Drawing Pencils
●HB for sketching
●H for oulines,visible lines,finishing,dimensioning
●2H for construction lines,Dimension Lines.

20. 2.LINES LETTERINGS AND DIMENSIONING
●Various types of lines are used in Engineering
Drawings.
●

21. Thickness of Line

22. ELEMENTS OF DIMENSIONING
●1) Projection Line
●2) Dimension Line
●3)Leader Line
●4)Dimension Line Termination
●5)Origin Indication
●6)Dimension

23. ●Projection Line:
A continous thin line should be extended beyond respective
dimension line.
●Should not cross other lines if possible
●Intersecting projection and dimension should be avoided.
●
●

24. ●DIMENSION LINE(Continous Thin Line)
●Dimesion lIne should not cross other lines.
●Centre lines or Outlines should not be used as Dimension Line.
●Dimension Line should be drawn from visible outline.

25. ●LEADER LINES(Continous Thin Lines)
●

26. ●Dimension Line Termination
●It carries arrow head or oblique strokes at their end.
●The arrowhead may be open,closed or closed filled in.
●In a drawing only one style of arrowhead termination should be used.
●
●

27. ●Origin
●An origin is made by a small open circle of approx 3mm in diameter

28. ●Dimension
●Numerical value indicated on a drawing in terms of measurement.
●The unit expressed in mm(millimetre).

29. Arrangement of Dimensioning
●Different arrangement indicate dimension based on design
requirements
●The main arrangements of Dimensioning are:
●Chain Dimensioning
●Parallel Dimensioning
●Superimposed Dimensioning

30. ●Chain Dimensioning:

31. Parallel Dimensioning
●Parallel Dimensioning
●Parallel Dimensioning is used when a number of dimension of a part
have common datum.
●Dimension starts from common feature.

32. ●Superimposed Running Dimensioning
●It is a simplified parallel Dimensioning.
●May be used where there is a space limitations.
●Origin should be indicated properly.
●One end should be terminated at origin while other end should carry
arrowhead
●

34. 3.Geometerical Constructions
●Terminology
a) Point: A dimensionless location where 2 lines intersect.
b) Line: Having specific length,having no breadth and thickness.
c)Circle: Path described by a point moving in a plane at a fixed distance(Radius)
and fixed point(Centre).
d) Angle: Formed by 2 intersecting lines. Measured in degrees.
e)Acute Angle: Angle having less than 90 deg
f)Obtuse Angle: Angle having greater than 90 deg.
g)Triangle:Bounded by 3 straight lines.
h) Rectangle: Having 4 sides and 2 sides equal.
i) Square: 4 Sided figure having 2 diagonals intersecting at right angles.

35. j)Rhombus: Four sided figure having 2 diagonals of unequal length intersecting.
k) Trapeizum:Four sided fig having opposites sided parallel.
l)Polygon: Multisided figure.
m) Regular Polygon: Multisided fig having length of sided equal and angles equal.
n)Regular Pentagon: Having 5 equal sides and included angle 72 deg
o) Regular Hexagon: Having 6 equal sided and included angle 120 deg
p)Regular Heptagon:Having 7 equal sided and included angle 128.6deg
q) Regular Octagon: Having 8 equal sidd and included angle 135 deg
r)Diameter of a Circle: Terminated Line passing through the centre of circle,
s) Chord of a circle: A line other than its diameter
t)Sector: Part of circle containing 2 radii and arc between them.

36. ●Bisecting a Line:

37. DIVIDING A LINE

38. Drawing Regular Polygon

40. CONSTRUCTION OF HEPTAGON

41. 4.SCALES
●For drawing small objects like electronic component ,wrist watches need to
draw larger size than the objects. Such drawings prepared to an enlarges size
is called ENLARGED SCALE DRAWING
●Drawings made to same size as object which it represents ,the drawing
obtained is known as FULL SCALE DRAWING OR FULL SIZE DRAWING
●Drawing prepared proportionally to smaller or larger size than actual size are
said to be made up of SCALE
Scale of a drawing may be defined as ratio of Linear Dimension of an object in
a drawing to the actual linear dimension of same object .
●Representative Fraction: may be defined as ratio of linear Distance between
any two points of the object on a drawing to the actual distance between the
same points of the object represented as (R.F)
●R.F=DISTANCE ON DRAWING/DISTANCE ON OBJECT

42. Plain Scale:
●A plain scale is the simplest scale shows only 2 consecutive units
such as millimeter(mm) ,centimeter(cm)and decimetre(dm).
●Here a line is divided into many number of equal parts or units(say
cm) and each unit is divided into no of parts say millimeter
●For construction plain scale needed to be :Representative fraction
scale ,Measuring Units of scale ,Maximum units to be measured.
●

44. ●DIAGONAL SCALE
●Diagonal scales are used to represent either 3 units of measurement
such as metre,decimetre and centimetre.
●

46. ●VERNIER SCALE
It is a modified form of Diagonal Scale.
●A short scale constructed along with plain scale to measure fraction
to the smallest division of the plain scale.
●A vernier scale has 2 parts:a)Fixed Scale: Main Scale
b)Movable Scale: Vernier Scale
●Vernier Scale slides on the side of main scale and both of them are
used together to measure small divisions upto 3 divisions,

47. 4.CONIC SECTIONS

54. Parabola
●A parabola is a curve that looks like the one
shown above. Its open end can point up, down,
left or right. A curve of this shape is called
'parabolic', meaning 'like a parabola'.
●
The most common example is when you stir up
orange juice in a glass by rotating it round its axis.
... Parabolas are also used in satellite dishes to
help reflect signals that then go to a receiver.

55. Construction Of Parabola by
Eccentricity Method

56. Rectangualar Parabola

57. Tangent Method Drawing Parabola

58. Hyperbola

60. THANK YOU

61. This work is licensed under a Creative Commons
Attribution-ShareAlike 3.0 Unported License.
It makes use of the works of Mateus Machado Luna.