HANDS_AND_FINGERS_SAFETY for safety training

safety ppt for safety presentation and teaching purpose

1. HANDS AND FINGERS
SAFETY

2. Chips and swarfs should be remove by a brush, NOT
with hands.

3. HANDS & FINGERS
•IF YOU HAVE HANDS & FINGERS, YOU HAVE
WORK. THINK, IF YOU WERE WITHOUT IT?
•NO MATTER WHAT IS YOUR JOB, ITS YOUR
HANDS AND FINGERS THAT HELP YOU
PERFORM IT.
•TAKING CARE OF YOUR HANDS AND
FINGERS IS YOUR RESPONSIBILITY
BECAUSE…………?

4. HAND & FINGER INJURIES
•LIKE INJURIES TO ANY OTHER
PARTOF YOUR BODY. INJURIES TO
YOUR HANDS AND FINGERS ARE
CAUSED DUE TO TWO MAIN
REASONS.
1.UN-SAFE ACTS
2.UN-SAFE CONDITIONS

5. FEW EXAMPLES
OF UN-SAFE ACTS
•NOT FOLLOWING THE PROCEDURE
•NO USE OF PPE
•WORKING ON UNFAMILIAR MACHINE
•DOING A JOB WITH OUT TRAINING
•IGNORE THE INSTRUCTIONS
•OVER CONFIDENCE
•HORSE PLAY
CAN YOU NAME SOME?

6. FEW EXAMPLES OF
UN-SAFE CONDITIONS
•DEFECTIVE MACHINE
•WEATHER CONDITIONS
•TIME FACTOR
•DEFECTIVE TOOLS
•WORKING AREA
•REACH
•AUDIO, VISUAL CONDITIONS
CAN YOU NAME SOME?

7. FACTORS
•AGE
•HEALTH CONDITIONS
•CONCENTRATION
•TRAINING
•WORKING SURFACE
•AUDIO VISUAL CONDITIONS
•SIGHT AND HEARING
•LEVEL OF UNDERSTANDING

8. USE OF PPE
•HANDS PROTECTION (GLOVES) ARE
PROVIDED BY COMPANY. ON SITE,
ALL WORKERS HAVE TO PUT THEIR
GLOVES ON TO PROTECT THEIR
HANDS AND FINGERS FROM
INJURIES.

9. Guard the circular saw and use a push stick. USE PPE

10. GUARDING
•BE EXTRA CAREFUL AND ALERT
WHILE WORKING ON MACHINES
WHICH ARE NOT PROTECTED BY
GUARDS. FOLLOW PROCEDURES
AND USE PROPER PPE FOR YOUR
HANDS AND FINGERS

11. WHAT TO DO
•KNOW THE JOB AND ITS HAZARDS
•KNOW THE TOOL / MACHINE YOU ARE OPERATING
•FOLLOW THE SAFE WORK PROCEDURE
•GET APPROPRIATE TRAINING. DO NOT BE SCARED
TO ASK IF YOU DO NOT KNOW
•CONCENTRATE ON WHAT YOU ARE DOING
•IF CONDITIONS ARE NOT FAVORABLE, STOP THE JOB

12. WHAT TO DO (CONTINUED)
•SELECT RIGHT TOOL AND USE IT FOR RIGHT
JOB
•REPLACE DEFECTIVE TOOL
•SELECT RIGHT KIND OF GLOVES
•WEAR THOSE GLOVES WHILE WORKING
•BREAK THE JOB IN STEPS
•FINISH EACH STEP CAREFULLY AND SAFELY
•CLEAR ALL TRASH, SCRAP AND OTHER
MATERIAL FROM WORK AREA.
•THINK BEFORE YOU START THE WORK

13. WHAT YOU CAN NOT DO
•DO NOT WORK ON OR WITH DEFECTIVE TOOLS
AND MACHINES
•DO NOT WORK IF YOU ARE NOT TRAINED
•DO NOT HORSEPLAY
•DO NOT CONTINUE WORK IF CONDITIONS ARE
UNSAFE
•DO NOT DO A JOB WITH OUT PROPER PROTECTIVE
EQUIPMENT
•DO NOT GET YOUR INJURE YOUR HANDS AND
FINGERS BECAUSE OF YOUR OWN MISTAKES

14. Your hands can earn you living….but can make you lose too.

15. REMEMBER
•ALL INJURIES ARE PREVENTABLE
•SAFE WORK PROCEDURE WILL KEEP YOUR HANDS AND
FINGERS GOOD
•CONCENTRATE ON WORK, THINKING SOMETHING ELSE
CAN CAUSE INJURIES
•USE ALL AVAILABLE EQUIPMENT TO FINISH THE JOB
SAFELY
•IF YOU ARE NOT SURE, YOUR SUPERVISOR IS THERE TO
TELL YOU. ASK HIM
•YOUR FINGERS AND HANDS ARE YOUR TOOLS.
TAKE CARE OF THEM.

16. ACID
SAVE YOUR HANDS AND FINGERS FROM CHEMICALS
BY:
• FOLLOWING CORRECT WORKING PROCEDURES .
• USING PROPER PROTECTIVE EQUIPMENT.
• GETTING INFORMATION ABOUT THE CHEMICAL.
• BEING ALERT ALL THE TIME.