Industrial Drawing Sample Exam..........

Technical Drawing Topic and Sample Exam

1. 1. The oldest type of written expression and is understood throughout the world is ____________. Drawing Drafting Lettering Painting 2. The ability of a person to put facts and truths in a graphic form, by means of line and tools is _______. Drawing Drafting Lettering Painting

2. 3. The act of making drawings is known as _______. Drawing Painting Lettering Drafting 4. What division of drawing that is concerned with the making of drawings without the use of drawing instruments? Mechanical Drawing Freehand Drawing Painting Drafting

3. 5. What do you call the art and science of describing structures and structural details completely and accurately by graphical means? Technical Drawing Freehand Drawing Drawing Drafting 6. The ability to acquire precision in the work – thus it must be free from errors. Legibility C. Accuracy Speed D. Neatness Accuracy Neatness

4. 7. Is not attained by hurrying but a by-product of intelligent and continuous work. Legibility Speed Accuracy Neatness 8. It is a process of thinking, planning, and setting of thoughts down on a piece of paper in graphic form. Drawing Painting Lettering Drafting

5. 9-10. Give the vision of ISAT U 11-15. What is ICARE stands for?

6. I. Identification A kind of multipurpose desk which can be used for any kind of drawing, writing or impromptu sketching on a large sheet of paper Are used where extreme accuracy is required. And these pencils are used in making guidelines. These pencils were designed to eliminate the necessity for sharpening.

7. 4. Is used to re-point a pencil when it becomes dull. It is made up of small thin piece of wood with a fine piece of sand paper pasted on it. 5. It is used as well as a guide to make horizontal lines and to provide an edge against which the triangles are placed. 6. Are used for smudging and rough lines. These pencils are used for art works especially for sketching.

8. 7. Are used to reproduce the dimension of an object to full size on the drawing to enlarge or reduce them to some regular proportions. 8. It is a removable adhesive tape used to provide temporary protection to an area while an adjacent area is being worked on. 9. Is made of fine animal hair which is used to remove or brush away rubber crumbs and loose dirt particles that collect on a drawing.

9. 10. Are used for general purpose work in technical drawing. 11. Is a semi-circular instrument for measuring and constructing angles. 12. A device or implement, especially one held in the hand, used to carry out a particular function. 13. Refers to the tools, machinery, or apparatus used to perform a specific task or function.

10. 14. Triangles with 2 equal side. 15. Used to draw the parallel lines and right angles. 16. Scale that is in the form of Metric System. 17. I s an object, typically a piece of soft rubber or plastic, used to rob out something written. II. Provide the following: 18. 1 example of drawing materials 19. 1 example of drawing tools 20. 1 example of drawing EQUIPMENT