kitchen casestudy

we have done a secondary case study

1. KITCHEN CASE-STUDY BY :- HARDIK JOSHI RAHEMAN ALI JIGAR GOTI JAYDEEP PATEL PARIN MALAKIYA

2. :- IT’S IMPORTANT TO DEFINE A MODULE TO OPTIMISE PERFOMANCE AND MINIMISE THE MANUFACTURING COST OF THE DIFF. PIECES HOW TO DESIGN KITCHEN

3. PHOTOS OF KITCHEN

4. HOW THE WORKSPACE SHOULD BE LIKE PANTRY AREA :- FOOD STORAGE SPACE, CANNED GOODS, FRIDGE STORAGE AREA :- APPLIANCES, UTENSILS, COOKWARE SINK AREA :- CLEANING AREA PREPARATION AREA :- IDEALLY A LARGE COUNTER SPACE TO WORK ON COOKING AREA :- STOVE AND OVEN.

5. TYPES OF KITCHEN THIS IS RELATED TO THE SPACE THAT THE DESIGN IS INTENDED FOR. THE MOST COMMONLY USED TYPES INCLUDE: LINEAR (OR TWO PARALLEL LINES) L-SHAPED U-SHAPED

6. LOWER MODULE: 1 BOTTOM / 1 BACK / 2 SIDES / 1 SHELF / 1 OR 2 DOOR / BASE / FRAME BARS UPPER MODULE: 1 BOTTOM / 1 BACK / 2 SIDES / 1 TOP / 1 SHELF / 1 OR 2 DOORS / FRAME BARS TOWER MODULE 1 BOTTOM / 1 BACK / 2 SIDES / 1 TOP / SERIES OF SHELVES AND DOORS / BASE THE MODUAL CONSISTS OF THE FOLLOWING ELEMENTS

7. SECTIONAL VIEW

8. ELEVATIONAL VIEW

9. THERE ARE SEVERAL TYPES OF MATERIALS FOR COUNTERTOPS. THE MOST COMMONLY USED ARE: LAMINATE:  THE BARE COUNTER IS COVERED WITH A SHEET OF HIGH-PRESSURE LAMINATE STONE: THE MOST COMMONLY USED TYPES ARE QUARTZ, GRANITE AND MARBLE OTHER:  MATERIALS GENERALLY DERIVED FROM A COMPOUND SUCH AS ACRYLIC COUNTERTROPES

10. BASEBOARDS :- IN THE PART OF THE CABINATE, IT IS THE BEST TO HAVE A PRODUCT WITH INCREASED RESISTANCE TO MOISTURE, LIKE LAMINATE COVERED PLYWOOD. :- ANOTHER OPTION IS TO ADD A METAL OR PLASTIC ACCESSORIES.

11. ADJUSTMENT OF SPACE

12. :- USE SCREW PROTECTORS. THESE CAN BE HIDDEN WITH THE USE OF WOODEN DOWELS. THE PROCESS IS SLOWER AND MORE EXPENSIVE BUT LEAVES A BETTER APPEARANCE. :- DISTANCING THE COUNTER TOP FROM THE CABINET IS A TREND. HOWEVER, WHEN DOING THIS YOU SHOULD LEAVE A LARGE ENOUGH SPACE (IDEALLY 30CM OR MORE) SO THAT IT IS EASY TO CLEAN. TIGHT SPACES MEAN MORE WEAR AND TEAR ON THE FURNITURE FROM USING WIPES OR A BROOM. :- THE BASEBOARDS MUST BE MADE OF MORE RESISTANT MATERIALS. IT RECOMMENDED NOT TO USE THE SAME MELAMINE AS THE CABINETS SINCE YOU WON’T GET THE SAME LIFETIME USE AT FLOOR LEVEL. RECOMMENDATIONS

13. :- THE QUALITY OF THE HARDWARE IS ESSENTIAL WHEN CREATING QUALITY FURNITURE. ITS LIFE IS MEASURED IN CYCLES AND THERE ARE SUBSTANTIAL VARIATIONS BETWEEN HARDWARE OF LOW AND HIGH QUALITY. A GOOD HINGE DETERMINES WHETHER OR NOT THE CABINET DOOR WILL FALL OFF. :- WHEN DESIGNING HANDLELESS FURNITURE YOU HAVE TO USE A CERTAIN LOGICAL ORDER FOR OPENING THE DOORS. IDEALLY, USE DOUBLE DOOR MODULES AND IF THERE IS A SPACE FOR A MODULE WITH A SINGLE DOOR, PUT IT IN THE CORNER.

14. :- WHEN USING DOORS ABOVE APPLIANCES (OVEN, MICROWAVE) LEAVE ENOUGH SPACE FOR YOUR HAND.

15. THANK YOU