Sodium hydroxide

ahmed191141 8,735 views 31 slides Aug 26, 2018
Slide 1
Slide 1 of 31
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15
Slide 16
16
Slide 17
17
Slide 18
18
Slide 19
19
Slide 20
20
Slide 21
21
Slide 22
22
Slide 23
23
Slide 24
24
Slide 25
25
Slide 26
26
Slide 27
27
Slide 28
28
Slide 29
29
Slide 30
30
Slide 31
31

About This Presentation

DAWOOD UET
[email protected]


Slide Content

Sodium Hydroxide

➢Sodium Hydroxide is a very basic compound
that is used mostly in the chemical industry.
In this presentation, you will learn more about
the uses, history and general facts
aboutSodiumHydroxide.

Sodium hydroxide, also known as lye and caustic soda, is an
inorganic compound
with the formula NaOH.
It is a white solid ionic compound consisting of sodium
cations Na+ and hydroxide
anions OH−.
Sodium Hydroxide was discovered by Humphrey Day while
in England in the year
1807.
The event or experiment that was used for this discovery is
unknown. For quite a
few years after its discovery it was considered an
elementary substance and was
called a fixes alkali

STRUCTURE OF NaOH

NaOH BONDING
We can see the sodium (Na) part on the left and
the hydroxide (-OH) part on the right.
Thebondthat binds the hydrogen (H) to the
oxygen (O) is covalent. The sodium is bonded to
the hydroxide part of the compound with an
ionicbond.

USES
Manufacturesoaps
Rayon
Paper
Explosives
petroleum products

PHYSICAL PROPERTIES:
Chemical formula:NaOH
Molecular weight:40.01
Synonyms:Whitecaustic,
caustic soda, soda lye, lye
Melting point:318. 4°C
Boiling point:1390°C
Specific gravity:2.13
Solubility:
Soluble in water, ethanol
and glycerol; insoluble in
acetone and ether
General characteristics:
White deliquescent solid

Raw Materials:
NaCl(sodium hydroxide)
H2O (water)

PRODUCTION OF NaOH
NaOH is produced by so many methods but some of the following methods are following:
➢REVERSE OF NEUTRALIZATION
➢CASTNER-KELLNER PROCESS
➢NELSON CELL
REVERSE OF NEUTRALIZATION
NaCl +H2O →HCl+ NaOH

Castner–Kellner process
➢PRINCIPLE
In castner-kellner method NaOH is prepared by the
electrolysis of aqueous solution of NaCl (Brine).
Concentration of brine
25 % mass/mass
i.e. 25 gm of NaCl is dissolved in 75 gm of water

Castner-kellner cell
It is a rectangular tank of steel.Inside of tank is lined
with "ebonite“.Anode is made of titanium.Flowing
layer of mercury (Hg) at the bottom of tank serves as
cathode.

.

Details of process
Ionization of NaCl
2NaCl→2Na
+
+ 2Cl
-
When electric current is passed through brine, +veand
-veions migrate towards their respectiveelectrodes.
Na
+
ionsare discharged at mercury cathode. The
sodium deposited at mercury forms
SODIUM AMALGAM. Chlorine produced at the
anode is removed from the top of the cell.

Reaction at cathode
2Na
+
+2 e
-
→2Na
Na forms amalgam.Na+ HgèNa/Hg
Na
+
ions are discharged in preference to H
+
ions due to
high over voltage.

Reaction at anode
2Cl
-
→Cl
2+ 2e
-
Formation of NaOH
Amalgam moves to another chamber called "denuder",
where it is treated with water to produce
NaOHwhich is in liquid state. Solid NaOH is
obtained by the evaporation of this solution.2Na/Hg +
2H
2O→2NaOH + H
2+ 2Hg

PFD DIAGRAM

Advantages of castner'sprocess
NaOHobtained is highly pure.
The process is very efficient
Possible reaction between NaOH and Cl
2is avoided as
NaOHis obtained in a separated chamber.

Disadvantages
High electricity consumption.
Environmental pollution due to escape of Hg vapours.

NELSON CELL:
➢Principle:
Electrolyte used in this process is aqueous NaCl (Brine).
Working:
Porous diaphragm of asbestos or metal oxide with polymer
separates anode and cathode compartments. Diaphragm
prevents hydroxide ions entering anode compartment and
prevents chloride ions entering cathode compartment.

Reaction At Anode
At the anode, carbon or titanium coated with Ru-Ti oxide, where
the chlorine ion are oxidized.
Saturated brine enters into the anode compartment and produces
chlorine gas.
Cl-1→Cl2+ 2e
Reaction At Cathode
The saturated flows the diaphragm and into the cathode compartment.
At the cathode, steel mesh, hydrogen gas and hydroxide are produced.
2H2O + 2e →H2+OH
Na+ migrates across diaphragm to cathode compartment combining
with OH-to form NaOH

Overall cell reaction:
2H2O(l)+ 2Cl-(aq)+ 2Na+(aq)→2Na+(aq)+ 2OH-(aq)+ H2(g)+
Cl2(g)
Sodium hydroxide NaOH(s)can be crystallized out.

NELSON CELL PFD

Chemical Properties:
➢Neutralization:
NaOH+ HCl→NaCl+ H
2O
➢Reaction with Ammonium Salts:
NaOH+ NH
4Cl →NH
4OH + NaCl
➢Reaction With Metal:
2Al + 2NaOH + 2H
2O →2NaAlO
2+ 3H
2

INDUSTRIES IN PAKISTAN
SITARA CHEMICALS
TUFAIL CHEMICALS
ICI PAKISTAN
PAK CHEMICALS
COSMO INTERNATIONALS

REFRENCES
https://www.mustakbil.com/companies/pakistan/che
micals
https://www.slideshare.net/yenwen/manufacture-of-
sodium-hydroxide
https://www.slideshare.net/bejoybj/applicatiosn-of-
sodium-hydroxide-caustic-soda
Google.com/images

ہیرکش

Any Question…???

IF ANY QUESTION:
Contact:
RaoShahriyarAli;
03144517113
MoizUr Rehman;
03369269090
BilalJatt;
03083303302
Khaleel;
03030216945